06-01-2011, 11:43 AM | #57 | |
Booooosted.
|
Quote:
Dealer says they don't work on aftermarket performance cars. What it is I suspect is they don't trust their mechanics to do it with the supercharger on it. |
|
06-01-2011, 11:44 AM | #58 |
"First There"
Drives: 2010 camaro 2ss Join Date: Feb 2011
Location: in a hole somewhere
Posts: 6,910
|
thats a lie....ill find out for ya....gm installs aftermarket parts. so they do work on them
|
06-01-2011, 11:45 AM | #59 |
and MR. HYDE
Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009
Location: Oxford, Alabama
Posts: 4,375
|
|
06-01-2011, 11:46 AM | #60 |
"First There"
Drives: 2010 camaro 2ss Join Date: Feb 2011
Location: in a hole somewhere
Posts: 6,910
|
wow sounds like gm needs to do some clean-up in alabama
|
06-01-2011, 11:49 AM | #61 |
and MR. HYDE
Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009
Location: Oxford, Alabama
Posts: 4,375
|
I agree. You should live here. They are thinking about liability cause I asked and are afraid of their techs not knowing and messing things up, especially if the car is tuned like mine. They do minor stuff but nothing powertrain related. This is the reason I have to go 3 hours to Vengeance to have any work done. |
06-01-2011, 11:52 AM | #62 |
"First There"
Drives: 2010 camaro 2ss Join Date: Feb 2011
Location: in a hole somewhere
Posts: 6,910
|
god forbid something wrong actually happens down there holy crap....id run that up the chain if i were you guys
|
06-01-2011, 11:54 AM | #63 | |
and MR. HYDE
Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009
Location: Oxford, Alabama
Posts: 4,375
|
Quote:
For example it took them 4 hours to install my GM axle back, 4 hours WTF and I sat there and watched. |
|
06-01-2011, 11:57 AM | #64 |
FASTER!
Drives: Challenger Hellcat, 2SS Camaro Join Date: Apr 2008
Location: Middle Tennessee
Posts: 2,245
|
Well, if the dealer is reluctant it's probably best you don't let them fool with the car. Most dealers around here are nothing more than parts changers. I know more about these cars than the guys in the shop most of the time, so no I never let a dealership touch my hot rod, but I've got a few years of experience fooling with this kind of stuff. I understand not everybody has that luxury, and finding a good shop is like finding a needle in a hay stack.
I'll check with some buddies and see if they know of any good places in Alabama that you can go to. I'm at a bit of a disadvantage since my Magnuson is on a Challenger, but mine came with a Predator tuner tool. I can hook it up to my car through OBDII, connect it to my laptop, fire up the Diablo DataViewer software and data log just about anything I want. Timing, command air fuel, O2 sensor, knock sensor, long term and short term fuel trims, you name it. Did your Maggie not come with something similar? My Predator will also read and clear CEL codes. Do you have gauges in your car? I'd HIGHLY suggest you get at least a boost and wide band air fuel ratio gauge. They're imperative in forced induction cars and can give you early warning when there are problems. I put a Aeroforce Interceptor in my Challenger and it hooks up to my OBDII port and will read and display nearly every single engine parameter. For wide band AFR I use a LC-1. It connects to the Aeroforce Interceptor so it'll read AFR along with the other pids from the cars computer. Pretty slick and clean. Here's a pic of my gauge setup for reference. Once we get your problem solved I'd put this on the very next thing to get done. The top gauge is obviously a mechanical boost gauge, I like to see a needle at quick glance, but the Interceptor will display it digitally if you want. On the Interceptor it's showing air fuel ratio (should be 14s at idle like mine shows) and ignition timing. That's usually how I leave it but it'll show up to 8 different pids in a cycle if you want. It'll flip to two more every 10 seconds or so. For air fuel ratio I like that gauge to be digital since you want to see 10ths. When I mat it the AFR drops to 11.5ish or so and timing changes according to IAT to avoid detonation. |
06-01-2011, 11:58 AM | #65 |
"First There"
Drives: 2010 camaro 2ss Join Date: Feb 2011
Location: in a hole somewhere
Posts: 6,910
|
yep if they dont have the mechs to do everything then there is a prob in that area.....hope a zr1 or cts-v doesnt come would love to hear the story on that one
|
06-01-2011, 12:01 PM | #66 |
and MR. HYDE
Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009
Location: Oxford, Alabama
Posts: 4,375
|
Well hopefully Randy can find this leak and it is not the body of the Supercharger having a crack in it.
Not to be funny but do think this is the reason the guy sold it? Is there a way to check the body for cracks? Just throwing ideas out. |
06-01-2011, 12:15 PM | #67 |
"First There"
Drives: 2010 camaro 2ss Join Date: Feb 2011
Location: in a hole somewhere
Posts: 6,910
|
that i dont know
|
06-01-2011, 12:17 PM | #68 |
Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011
Location: ROCKMART, GA
Posts: 2,185
|
Pm me next time you want to ride to atlanta I know a shop that can find the problem ill promise you that. I also dont believe its an air leak.
|
06-01-2011, 12:36 PM | #69 | |
"First There"
Drives: 2010 camaro 2ss Join Date: Feb 2011
Location: in a hole somewhere
Posts: 6,910
|
Quote:
|
|
06-01-2011, 12:42 PM | #70 |
Go Blue!!!!!
Drives: 2012 Cruze LT Join Date: Mar 2009
Location: Indiana
Posts: 23,290
|
The plugs look fine.
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Roto-Fab | Engine Covers - S/C | Fuse Relay Cover | Radiator Cover | Billet Oil Cap+ | AutoAgenda | Exterior Parts & Accessories | 14 | 02-06-2013 08:43 PM |
What do all the abbreviations mean? | CrzyGamr2 | 5th Gen Camaro SS LS LT General Discussions | 77 | 12-07-2012 04:34 AM |
g5cr cai system anybody install or looking at one "pics" | camarossrs2150 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 41 | 07-14-2011 08:26 PM |
Cold Air Intakes 2010 Camaro Blowout! K&N | AIRAID | SLP | Best Price Guaranteed! PM | AutoAgenda | V8 Bolt-Ons & Tunes | 47 | 01-12-2011 12:35 PM |