Lsa supercharger porting? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tartagliazl1 · 11-22-2019, 06:43 AM

Looks like Edelbrock makes the kong 2650 blower for them.

RobZL1 · 11-22-2019, 10:35 AM

Ah ha! Now we know what's up.

ZMEnow · 11-23-2019, 10:06 AM

Interesting that Edelbrock is using an Eaton Blower, probably because Eaton wont sell direct.

The Caddy youtube was impressive if you have time to watch the whole thing. About an hour.

tartagliazl1 · 11-29-2019, 11:56 AM

Weapon-x blackfriday includes the supercharger and snout porting $959 for both pretty good price.

Boother · 11-29-2019, 12:55 PM

Quote:

Originally Posted by ZMEnow

Interesting that Edelbrock is using an Eaton Blower, probably because Eaton wont sell direct.

The Caddy youtube was impressive if you have time to watch the whole thing. About an hour.

Everyone runs Eaton rotors in their products. Those listed above and all others (JDP, Ford, GM, SLP, etc). The rotors are all the same, but the manufacturer designs their own case to work with them. Assuming the same drive side, a 2300 TVS rotor set is interchangeable between a OEM ZR1 and a Heartbeat.

ZMEnow · 11-30-2019, 01:32 AM

Quote:

Originally Posted by Boother

Everyone runs Eaton rotors in their products. Those listed above and all others (JDP, Ford, GM, SLP, etc). The rotors are all the same, but the manufacturer designs their own case to work with them. Assuming the same drive side, a 2300 TVS rotor set is interchangeable between a OEM ZR1 and a Heartbeat.

Let me be more specific, Eaton sells a TVS 2650 as well.

Boother · 12-02-2019, 09:07 AM

Quote:

Originally Posted by ZMEnow

Let me be more specific, Eaton sells a TVS 2650 as well.

Eaton does not sell a supercharger to anyone but OEMs. They manufacture the rotor assemblies and sell them to aftermarket companies. All TVS 2650 based supercharger are using Eaton rotors, no matter who sells the final product.

ZMEnow · 12-02-2019, 05:50 PM

All i stated was they sell one, not to whom. If you go back and read my orig post I noted they probably wont sell to anyone but OEM.

"Eaton does not sell a supercharger to anyone but OEMs."

11-22-2019, 06:43 AM	#15
tartagliazl1 Drives: 2013 zl1 vert Join Date: Dec 2018 Location: Rochester, New york Posts: 949	Looks like Edelbrock makes the kong 2650 blower for them. Attached Images

11-22-2019, 10:35 AM	#16
RobZL1 fo'shizZL1 Drives: 2017 ZL1 Join Date: Aug 2017 Location: ATL Posts: 1,281	Ah ha! Now we know what's up. __________________ 2017 ZL1 M6 Black \| Maggie 2650 // 103TB // Big Gulp Past Rides- 2014 ZL1 M6 Red Hot \| Tons of mods 2004 CTS-V M6 Silver \| Many mods 1995 Corvette M6 Torch Red \| A few more mods 1992 Camaro M5 White \| A few mods

11-23-2019, 10:06 AM	#17
ZMEnow Drives: ZL1, 2013, tri-coat-red, manual Join Date: Nov 2013 Location: Michigan Posts: 1,607	Interesting that Edelbrock is using an Eaton Blower, probably because Eaton wont sell direct. Magnuson Products Roush Performance Products Edelbrock Systems Harrop Engineering The Caddy youtube was impressive if you have time to watch the whole thing. About an hour.

11-29-2019, 11:56 AM	#18
tartagliazl1 Drives: 2013 zl1 vert Join Date: Dec 2018 Location: Rochester, New york Posts: 949	Weapon-x blackfriday includes the supercharger and snout porting $959 for both pretty good price. Last edited by tartagliazl1; 11-29-2019 at 12:49 PM.

12-02-2019, 05:50 PM	#22
ZMEnow Drives: ZL1, 2013, tri-coat-red, manual Join Date: Nov 2013 Location: Michigan Posts: 1,607	All i stated was they sell one, not to whom. If you go back and read my orig post I noted they probably wont sell to anyone but OEM. "Eaton does not sell a supercharger to anyone but OEMs."