You are browsing camaro5 
 |
|
06-01-2016, 10:06 AM
|
#1807 |
|
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Pumpkin seen some snow for the first time on the way back from Warriors Celebration on the high mountain pass.
 You could not have driven a pin up with a sledge hammer with the P Zero's on. 
__________________
Last edited by Merc; 06-01-2016 at 11:12 AM. |
|
|
|
06-01-2016, 11:15 AM
|
#1808 |
|
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Back to Pumpkin stuff now that Warriors run to the RBC Cup is done. Spool and gear set arrived yesterday.
__________________
|
|
|
|
|
06-02-2016, 11:01 AM
|
#1809 | |
|
Boosted Moderator
Drives: Bone Stock LS3 Join Date: Sep 2009
Location: Marion Tx
Posts: 15,476
  |
Quote:
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
|
|
|
|
|
06-08-2016, 11:32 PM
|
#1810 |
|
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Got a call from BDS today my new 9" is assembled and ready to go.
__________________
|
|
|
|
|
06-09-2016, 08:47 PM
|
#1811 |
|
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
9" 457 stuff back from BDS today.
__________________
|
|
|
|
|
06-09-2016, 10:57 PM
|
#1812 |
|
Boosted Moderator
Drives: Bone Stock LS3 Join Date: Sep 2009
Location: Marion Tx
Posts: 15,476
|
Sweet, when's it going in...?
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
|
|
|
|
06-10-2016, 10:30 AM
|
#1813 | |
|
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Quote:
__________________
|
|
|
|
|
|
06-10-2016, 11:25 AM
|
#1814 |
|
CamaroFans.com
|
Nice...
__________________
 |
|
|
|
|
06-21-2016, 07:23 PM
|
#1815 |
|
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
DSS to the rescue
One little thing we overlooked when switching to the HD Pro case was the extra ribbing on the Daytona support that will interfere with the mounting bracket.
DSS sent me the machined version to fix that problem in exchange for mine which they will re-machine.  Could have fixed it with an angle grinder at the last minute had need be. BDS is doing the swap as they put it together. 
__________________
Last edited by Merc; 06-21-2016 at 08:10 PM. |
|
|
|
|
06-27-2016, 01:36 PM
|
#1816 |
|
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Saga Continues
BDS did the swap of the Daytona support and while they were torquing the pinion nut this happened.
Now it looks like a long drawn out process with Strange and US Gears for a refund on the gear set. BDS not a fan of US Gears put a set of Motive Performance gears in. 
__________________
Last edited by Merc; 07-04-2016 at 04:10 PM. |
|
|
|
|
07-15-2016, 06:42 PM
|
#1817 |
|
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Pinion Update:
Got a call from Strange today, full refund issued for the gear set. Serious metal issues with the ring and pinion. Would have been bad news if I had of run them.  
__________________
|
|
|
|
|
08-31-2016, 09:56 PM
|
#1818 |
|
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Got the last piece to the puzzle about a week ago from DSS which were the 35 spline stubs to fit the spool.
Had Pumpkin up on the hoist today to check the dimensions. Looks like the Strange HD case set up is about .250 longer then the Strange iron case set up. Tomorrow is the 457 with a spool install day. It's going to close on the driveshaft length. Plan B will be machine off a bit off the front adapter to make it all fit. Which is doable, will mean a trip to JRM machine shop to be milled.
__________________
|
|
|
|
|
09-03-2016, 01:24 AM
|
#1819 |
|
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
457 spool is in Pumpkin, but not without drama to get it done.
__________________
|
|
|
|
|
09-12-2016, 01:20 PM
|
#1820 |
|
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Starting to strip weight out of Pumpkin for this Friday night Street Legals.
__________________
|
|
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Can ring and pinion be installed w/ pumpkin in car? | GMRULZ | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 2 | 01-19-2011 07:33 PM |
| Pumpkin Fixed | Merc | Canada | 12 | 10-24-2010 08:38 PM |
| Nekoosa Pumpkin Fest | blackgoldhtr | USA - Great Lakes | 1 | 10-14-2010 08:18 PM |
| Pumpkin Gets Signed | Merc | Canada | 9 | 09-03-2010 11:12 PM |
| Pumpkin is moving to the city | Noah | 5th Gen Camaro SS LS LT General Discussions | 0 | 11-27-2009 01:12 PM |
