SCAP SEMA Camaro - Page 8 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

DSworo9 · 10-06-2009, 02:17 PM

Lights on the front/rear & wheels;

The rest of the design;

chevydude26 · 10-06-2009, 05:20 PM

this actually looks like it would be good and not like those cheap modifications everybody else is doing...

they are actually changing the body style this time

well the progress so far i don't like the rice look in the first page

FEARONE · 10-06-2009, 06:28 PM

Quote:

Originally Posted by scapcamaro

who's name is at the top of this thread? SCAP! start your own thread. this is about SCAP's camaro. there is a SEMA thread, post about your self there.

No need to get jealous, it's a big world

scapcamaro · 10-06-2009, 06:35 PM

Quote:

Originally Posted by DSworo9

Lights on the front/rear & wheels;

The rest of the design;

i don't mind constructive criticism, but

is not helping me. please if you don't like something let me know what you would have done. i like to hear all side.

camarojoe · 10-06-2009, 08:05 PM

Quote:

Originally Posted by chevydude26

this actually looks like it would be good and not like those cheap modifications everybody else is doing...

they are actually changing the body style this time

well the progress so far i don't like the rice look in the first page

Tons of differnt things can be done to customize a car. It's cool that his shop is 15 minutes away and I can get a sneak peek any time

Quote:

Originally Posted by FEARONE

No need to get jealous, it's a big world

Vinyl stickers and lambo doors doesn't count as custom. Start your own thread if yours is all big and bad.. If not, then the thread is about SCAPs SEMA car, not yours.

_

RyanDenos89 · 10-06-2009, 09:06 PM

Quote:

Originally Posted by camarojoe

A few things I could mention more on is that the 2 holes in the front bumper are not for huge foglights, but for the twin turbo setup.

The foglights will be located more towards the center like on a 69 Camaro

The grill area was given the pissed off look to make way for the new grill. It will soon have a new lower valanece installed.

The in dash unit is functional and the heater controls will be located where the guage cluster went on the 2LT and 2SS in the console.

It is getting a custom guage package in place of the original.

I'm drooling over the taillights. They customized them to fit (narrowed them). They used the tails offered by Marquez Designs that currently create them for 67-69 Camaro.

And some BIG brakes are coming in for it.

so this is going to be a tt v6, who is going to tune it?????

JBz007 · 10-06-2009, 10:55 PM

Back looks really good but I'll have to wait and see the finished front before I can make a decision. Good work so far.

scapcamaro · 10-07-2009, 05:10 AM

Quote:

Originally Posted by RyanDenos89

so this is going to be a tt v6, who is going to tune it?????

the way it looks now is, that RDP motorsports is going to do the tuning on it. GM make higher flow rate injectors for the motor. we will see if we can crack the computer.

pearcecustoms · 10-07-2009, 11:11 AM

Quote:

Originally Posted by scapcamaro

the way it looks now is, that RDP motorsports is going to do the tuning on it. GM make higher flow rate injectors for the motor. we will see if we can crack the computer.

Give HPTuners a call, they may already be working on it.

scapcamaro · 10-07-2009, 11:15 AM

Quote:

Originally Posted by pearcecustoms

Give HPTuners a call, they may already be working on it.

when i talked to them they had nothing for the v6, all work was on the v8

sasquash1984 · 10-07-2009, 04:02 PM

i like the looks of it and the color scheme

King Mouse · 10-07-2009, 10:53 PM

Quote:

Originally Posted by FEARONE

No need to get jealous, it's a big world

Why are you even posting here?

camarojoe · 10-08-2009, 10:19 PM

Mark hasn't mentioned it on here, but their SCAP Camaro will be in a very good place at SEMA on display. It will be in the BASF booth sharing space with one of Chip Foose's new builds.

So if you go to SEMA, make sure you check it out.

I'm going to try and ride over to the shop again and take some more pics this weekend if Mark doesn't post some up before I do.

tones2SS · 10-09-2009, 06:11 PM

Quote:

Originally Posted by camarojoe

Mark hasn't mentioned it on here, but their SCAP Camaro will be in a very good place at SEMA on display. It will be in the BASF booth sharing space with one of Chip Foose's new builds.

So if you go to SEMA, make sure you check it out.

I'm going to try and ride over to the shop again and take some more pics this weekend if Mark doesn't post some up before I do.

Please do post more pics. THANKS!

10-06-2009, 02:17 PM	#99
DSworo9 Original Polish Memeber Drives: 2002 WS6 Trans Am Join Date: Feb 2009 Location: Illinois Posts: 43 View My Garage	Lights on the front/rear & wheels; The rest of the design; __________________ "Start living or start dying." “I am a soldier, I fight where I am told, and I win where I fight.”

10-06-2009, 05:20 PM	#100
chevydude26 Drives: Future 2011 camaro convertible Join Date: Jun 2008 Location: New Jersey Posts: 1,257	this actually looks like it would be good and not like those cheap modifications everybody else is doing... they are actually changing the body style this time well the progress so far i don't like the rice look in the first page __________________ I think i flip flopped on the ss bumper...it looks good man...it really does

10-06-2009, 10:55 PM	#105
JBz007 Broke College Student Drives: 2000 Hyundai Elantra Join Date: Apr 2009 Location: TX Posts: 108	Back looks really good but I'll have to wait and see the finished front before I can make a decision. Good work so far. __________________ God created man to create the Camaro

10-07-2009, 04:02 PM	#109
sasquash1984 502 RWHP N/A Drives: The yeti Join Date: May 2009 Location: Saginaw/ Ft Worth TX Posts: 3,085 View My Garage	i like the looks of it and the color scheme __________________ factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Winner, winner - Jalopnik compares the Big 3	Number 3	5th Gen Camaro SS LS LT General Discussions	31	04-17-2011 03:24 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
4 SEMA CAMAROS finally unveiled by GM! (hi-res images & details)	FenwickHockey65	Camaro Photos \| Spyshots \| Video \| Media Gallery	237	11-03-2008 10:39 PM
2010 SEMA Camaro "Black" heading for showroom floor	Nexus6	5th Gen Camaro SS LS LT General Discussions	98	11-03-2008 07:00 PM
Camaro Accessories from SEMA	FenwickHockey65	5th Gen Camaro SS LS LT General Discussions	1	11-03-2008 02:25 PM

10-08-2009, 10:19 PM	#111
camarojoe Drives: 69 Camaro Join Date: Feb 2009 Location: Buffalo NY Posts: 282	Mark hasn't mentioned it on here, but their SCAP Camaro will be in a very good place at SEMA on display. It will be in the BASF booth sharing space with one of Chip Foose's new builds. So if you go to SEMA, make sure you check it out. I'm going to try and ride over to the shop again and take some more pics this weekend if Mark doesn't post some up before I do.