You are browsing camaro6 
11-29-2016, 05:55 PM
|
#1 |
 
Drives: 2016 SS, BLACK, MANUAL Join Date: Apr 2010
Location: pittsburgh, pa
Posts: 277
|
Stock springs and upper/lower trailing arms
I have the stock suspension springs and upper/lower trailing that I will give to whomever wants them for free except postage. Paying it forward!!
__________________
2016 Black/Black SS, 6speed, MRC, Roto-Fab air intake, Vitesse controller,
1 7/8" headers and exhaust from Stainless Works complete with nonNPP mufflers and 5"outlets, Katech ported TB, Moroso catch can, MRR M017 polished powder wheels, Eibach lowering springs, and BMR upper/ lower trailing arms and upper control arms. ZL1/1le sway bars and Magnusson Supercharger with Jannetty tune. Stay Tuned!!!......More to come. 2014 Camaro Ashen grey, 3.6, 6 speed, Vararam intake, Elite catch can, chrome wheels, and Vitesse controller. 2003 SSR red, 2016 Vette |
|
|
|
11-29-2016, 06:36 PM
|
#2 |
 Drives: '23 LT Vert M6'16 Hyper 2SS Vert MT Join Date: Sep 2016
Location: Carlsbad, San Diego, CA
Posts: 583
|
Cool of you Gary. Hey, did you notice any negative effects of the lowering springs on the MRC? I"m contemplating doing that. . .
|
|
|
|
|
11-29-2016, 07:48 PM
|
#3 |
|
Drives: 2016 SS, BLACK, MANUAL Join Date: Apr 2010
Location: pittsburgh, pa
Posts: 277
|
I am getting the alignment done on Thursday and I know the steering wheel is down 35degrees from horizontal so until I get it done I will not drive it. During the course of changing these items I found one of the front links was bleeding grease and needed to be changed out and I found a rear wheel lug bolt/stud that was messed up....more work especially the removal of the rear hub to change out the stud.( The front wheel studs knock right out but the rear requires the spindle to be disassembled and lowered to have access to the bolts to remove the hub.) I will advise this weekend how it rides...Stay Tuned!!
__________________
2016 Black/Black SS, 6speed, MRC, Roto-Fab air intake, Vitesse controller,
1 7/8" headers and exhaust from Stainless Works complete with nonNPP mufflers and 5"outlets, Katech ported TB, Moroso catch can, MRR M017 polished powder wheels, Eibach lowering springs, and BMR upper/ lower trailing arms and upper control arms. ZL1/1le sway bars and Magnusson Supercharger with Jannetty tune. Stay Tuned!!!......More to come. 2014 Camaro Ashen grey, 3.6, 6 speed, Vararam intake, Elite catch can, chrome wheels, and Vitesse controller. 2003 SSR red, 2016 Vette |
|
|
|
|
12-01-2016, 07:39 PM
|
#4 |
|
Drives: 2016 SS, BLACK, MANUAL Join Date: Apr 2010
Location: pittsburgh, pa
Posts: 277
|
ttt
__________________
2016 Black/Black SS, 6speed, MRC, Roto-Fab air intake, Vitesse controller,
1 7/8" headers and exhaust from Stainless Works complete with nonNPP mufflers and 5"outlets, Katech ported TB, Moroso catch can, MRR M017 polished powder wheels, Eibach lowering springs, and BMR upper/ lower trailing arms and upper control arms. ZL1/1le sway bars and Magnusson Supercharger with Jannetty tune. Stay Tuned!!!......More to come. 2014 Camaro Ashen grey, 3.6, 6 speed, Vararam intake, Elite catch can, chrome wheels, and Vitesse controller. 2003 SSR red, 2016 Vette |
|
|
|
|
03-16-2017, 06:19 PM
|
#5 |
|
Drives: 2016 SS, BLACK, MANUAL Join Date: Apr 2010
Location: pittsburgh, pa
Posts: 277
|
ttt
__________________
2016 Black/Black SS, 6speed, MRC, Roto-Fab air intake, Vitesse controller,
1 7/8" headers and exhaust from Stainless Works complete with nonNPP mufflers and 5"outlets, Katech ported TB, Moroso catch can, MRR M017 polished powder wheels, Eibach lowering springs, and BMR upper/ lower trailing arms and upper control arms. ZL1/1le sway bars and Magnusson Supercharger with Jannetty tune. Stay Tuned!!!......More to come. 2014 Camaro Ashen grey, 3.6, 6 speed, Vararam intake, Elite catch can, chrome wheels, and Vitesse controller. 2003 SSR red, 2016 Vette |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
