2010-2013 Full Turbonetics Kit and Lots More - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jaytee1456 · 06-05-2018, 06:09 PM

Hey guys...I've finally decided to get rid of my car. Before doing so, I'm going to be pulling off a bunch of stuff. Hoping to possibly find someone looking for a good deal on a complete package of upgrades. If I can't find someone interested in all or most, I'll begin selling separately.

Here is a list of items:

1. Turbonetics 50 state Legal Single T76 Ceramic Ball Bearing Turbo Kit. I've had the kit for exactly one year and it's in excellent shape. This will be complete, ready to install...including the following (Polished Turbo, All Hot/Cold side piping, 630cc Injectors, Dual Evolution Wastegates, Turbo Smart BOV, Cooling/Oil Hoses, fittings, Huge Spearco FMIC, and Diablosport Handheld Tuner with programmed tune installed). Has only seen 7lbs of boost so far, but capable of much more.

2. Additional Aluminum Intake Piping to support a Cone Filter if desired
3. Ported Throttle Body
4. Solo High Flow Cats w/02 Extenders
5. Straight Piping Exhaust already cut for Turbo Kit (If desired)
6. Elite EX2 Catch Can Black and Clean Side separator (1 month old)
7. ZL1 Fuel Pump (1 month old)
8. ADM FPCM (1 month old)
9. Gauge Pillar POD (AEM AFR Gauge/Autometer Boost/Meth Indicator Light)
10. New ZR1 3-bar MAP Sensor
11. Caspers 108136 Break Out IAT Harness
12. IAT Sensor
13. AEM Methanol Injection Kit (V2 Controller/1 gallon tank)
14. Taylor 409 spark plug wires (1 month old)
15. Skip Shift Eliminator
16. Turbo Smart manual boost controller (1 month old)

Also have a new set of 9lb wastegate springs still in the wrapping. Again, this is an excellent bolt on kit that makes nice power. I was never able to retune with the extra's, but there is plenty of potential for the next owner.

I'd like to get $5500k for everything as a package. Thanks.
I can get more pics as needed.

drakeweston · 06-05-2018, 07:16 PM

How much for the pillar pod? With the aem gauge? Text me at 417438402 ! Very interested

jaysanti · 06-05-2018, 08:39 PM

PM sent I’m in SoCal interested in ZL1 pump and few other parts, ready to pickup and bring you cash thanks!

Vandal0-0 · 06-05-2018, 09:16 PM

I would be interested in the turbo kit,catch can,boost controller. Don’t really need all the other stuff since I’m pulling a Kenne Bell blower so have all the supporting mods

jaytee1456 · 06-05-2018, 09:43 PM

I’d be willing to work something out with you, however I feel like shipping to Canada would cost a fortune. The package(s) would be pretty heavy. So would you need injectors or are you good there too? Thanks

Quote:

Originally Posted by Vandal0-0

I would be interested in the turbo kit,catch can,boost controller. Don’t really need all the other stuff since I’m pulling a Kenne Bell blower so have all the supporting mods

jaytee1456 · 06-05-2018, 09:44 PM

If I can sell the turbo kit without the fueling, I’d be willing to work something out with you. I’ll keep you posted. Thanks.

Quote:

Originally Posted by jaysanti

PM sent I’m in SoCal interested in ZL1 pump and few other parts, ready to pickup and bring you cash thanks!

jaytee1456 · 06-05-2018, 09:46 PM

I’ll keep you posted. If I start separating stuff, I want to be sure most of the big stuff is accounted for first. Thank you

Quote:

Originally Posted by drakeweston

How much for the pillar pod? With the aem gauge? Text me at 417438402 ! Very interested

Vandal0-0 · 06-05-2018, 10:40 PM

Quote:

Originally Posted by jaytee1456

I’d be willing to work something out with you, however I feel like shipping to Canada would cost a fortune. The package(s) would be pretty heavy. So would you need injectors or are you good there too? Thanks

Nope I have 120lb injectors already. I may be able to get a deal on shipping through the wife’s work

drakeweston · 06-06-2018, 12:33 AM

Thanks man! I’d be happy to buy them off you if all the other parts are sold.

thecarter0 · 06-06-2018, 10:09 AM

What’s the exhaust setup?

jaytee1456 · 06-06-2018, 11:45 AM

I'll PM you now.

Quote:

Originally Posted by Vandal0-0

Nope I have 120lb injectors already. I may be able to get a deal on shipping through the wife’s work

jaytee1456 · 06-06-2018, 11:56 AM

Just straight piped, no mufflers. Exhaust is cut for the Turbo kit. Thanks.

Quote:

Originally Posted by thecarter0

What’s the exhaust setup?

Abrz_ · 06-06-2018, 12:16 PM

If you're willing to separate the catch can I'm local, check pm

jaytee1456 · 06-07-2018, 01:21 PM

Okay, so I'm hoping to begin the disassembly process this weekend. If I don't get any solid commitments for everything as a bundle by the end of next week..I'll start to piece things out for all those that were interested.

If someone out there is serious and wants the whole package...I'll let it go for $5500. That's less than the kit alone costs alone. Save some cash and get alot more.

06-05-2018, 06:09 PM	#1
jaytee1456 Drives: 2011 Camaro SS Synergy Package Join Date: Mar 2017 Location: Ventura, CA Posts: 43	2010-2013 Full Turbonetics Kit and Lots More Hey guys...I've finally decided to get rid of my car. Before doing so, I'm going to be pulling off a bunch of stuff. Hoping to possibly find someone looking for a good deal on a complete package of upgrades. If I can't find someone interested in all or most, I'll begin selling separately. Here is a list of items: 1. Turbonetics 50 state Legal Single T76 Ceramic Ball Bearing Turbo Kit. I've had the kit for exactly one year and it's in excellent shape. This will be complete, ready to install...including the following (Polished Turbo, All Hot/Cold side piping, 630cc Injectors, Dual Evolution Wastegates, Turbo Smart BOV, Cooling/Oil Hoses, fittings, Huge Spearco FMIC, and Diablosport Handheld Tuner with programmed tune installed). Has only seen 7lbs of boost so far, but capable of much more. 2. Additional Aluminum Intake Piping to support a Cone Filter if desired 3. Ported Throttle Body 4. Solo High Flow Cats w/02 Extenders 5. Straight Piping Exhaust already cut for Turbo Kit (If desired) 6. Elite EX2 Catch Can Black and Clean Side separator (1 month old) 7. ZL1 Fuel Pump (1 month old) 8. ADM FPCM (1 month old) 9. Gauge Pillar POD (AEM AFR Gauge/Autometer Boost/Meth Indicator Light) 10. New ZR1 3-bar MAP Sensor 11. Caspers 108136 Break Out IAT Harness 12. IAT Sensor 13. AEM Methanol Injection Kit (V2 Controller/1 gallon tank) 14. Taylor 409 spark plug wires (1 month old) 15. Skip Shift Eliminator 16. Turbo Smart manual boost controller (1 month old) Also have a new set of 9lb wastegate springs still in the wrapping. Again, this is an excellent bolt on kit that makes nice power. I was never able to retune with the extra's, but there is plenty of potential for the next owner. I'd like to get $5500k for everything as a package. Thanks. I can get more pics as needed. Attached Images Last edited by jaytee1456; 06-07-2018 at 01:22 PM.

06-05-2018, 08:39 PM	#3
jaysanti Drives: 2013 Camaro 2SS/RS Join Date: Feb 2013 Location: Socal LA Posts: 153 View My Garage	PM sent I’m in SoCal interested in ZL1 pump and few other parts, ready to pickup and bring you cash thanks! __________________ Follow Me @ssatann_ss

06-06-2018, 12:16 PM	#13
Abrz_ Drives: camaro 2ss/rs Join Date: Jun 2017 Location: Oxnard CA Posts: 46	If you're willing to separate the catch can I'm local, check pm __________________ 5th gen BTR turbo 3cam, AGP twin 57s /E85/fore dual 450s/vaporworx controller 19 SS Huron speed twin 62/62 turbos 18 ZL1 2650 / port / Holley / New Era Performance stage 3 pd cam / Frankenstein ported heads 9.4 @ 151 3500da @stalk_zl1

06-05-2018, 07:16 PM	#2
drakeweston Drives: 2010 Camaro 1SS Join Date: May 2018 Location: Joplin, MO Posts: 40	How much for the pillar pod? With the aem gauge? Text me at 417438402 ! Very interested

06-05-2018, 09:16 PM	#4
Vandal0-0 Drives: 2010 CAMARO 2SS/RS Join Date: Dec 2016 Location: Calgary,AB Posts: 82	I would be interested in the turbo kit,catch can,boost controller. Don’t really need all the other stuff since I’m pulling a Kenne Bell blower so have all the supporting mods

06-06-2018, 12:33 AM	#9
drakeweston Drives: 2010 Camaro 1SS Join Date: May 2018 Location: Joplin, MO Posts: 40	Thanks man! I’d be happy to buy them off you if all the other parts are sold.

06-06-2018, 10:09 AM	#10
thecarter0 Drives: 2010 Camaro SS Join Date: May 2017 Location: Houston Posts: 51	What’s the exhaust setup?

06-07-2018, 01:21 PM	#14
jaytee1456 Drives: 2011 Camaro SS Synergy Package Join Date: Mar 2017 Location: Ventura, CA Posts: 43	Okay, so I'm hoping to begin the disassembly process this weekend. If I don't get any solid commitments for everything as a bundle by the end of next week..I'll start to piece things out for all those that were interested. If someone out there is serious and wants the whole package...I'll let it go for $5500. That's less than the kit alone costs alone. Save some cash and get alot more.