08-13-2011, 07:49 PM | #1 | ||
Booooosted.
|
Driveline/U Joint/Transmision noise.... take a listen.
Ok. Car has been making this noise for a long time now. Even before the cam and trip to Atlanta to the F-Body Gathering. So I got under it to figure it out thinking U Joint.
You guys tell me...... The car drives just fine othe than the slight wheel vibrations. Noise has always been realy quiet, almost hard to hear but getting easier to hear. Here is the noise inside the car idling on jackstands. Noise speeds up with car speed, NOT engine speed. Noise happens even with the car off and in nuetral like the second video shows as I had my son spin the rear wheels and I got under it. |
||
08-13-2011, 07:59 PM | #2 | ||
Truth Enforcer
Drives: anything I can get my hands on Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,797
|
Keep your sons fingers away from those wheels!!!!
dont need another "accident" your square wheels have thrown your driveshaft out of balance is he joking? or y so serious?
__________________
Never race anything you can't afford to light on fire and push off a cliff
A group as a whole tends to be smarter than the smartest person in that group until one jackass convinces everyone otherwise. Quote:
Quote:
|
||
08-13-2011, 08:02 PM | #3 | ||
Truth Enforcer
Drives: anything I can get my hands on Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,797
|
oh, and I hate your Iphone videos
__________________
Never race anything you can't afford to light on fire and push off a cliff
A group as a whole tends to be smarter than the smartest person in that group until one jackass convinces everyone otherwise. Quote:
Quote:
|
||
08-13-2011, 08:07 PM | #4 |
Booooosted.
|
I need to turn the phone. Plus I can put them on youtube in like 30 seconds but the quality sucks. Audio is good though.
So what do you think all that noise is? |
08-13-2011, 08:10 PM | #5 |
Drives: 2010 2SS/RS M6 Black on Black Join Date: Jan 2010
Location: Global Citizen
Posts: 1,243
|
Sounds like "clank-uh, clank-uh, clank-uh" to me.
U-joints get my vote. Just what you need, spend $1,400 for a one-piece carbon fiber drive shaft and your noise will be gone.
__________________
Meh
|
08-13-2011, 08:27 PM | #6 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
pq, you got the worst luck..lol....at least when you go in the house at night , you got a hot wife to look at to make all this look like trivial stuff..good luck and keep us posted...with that much noise happening , it should be easy to identify once you get up on a lift..
__________________
|
08-13-2011, 09:09 PM | #7 | ||
Booooosted.
|
Quote:
Quote:
|
||
08-13-2011, 10:33 PM | #8 |
|
Is it coming from the pumpkin? Is anything coming in contact with the axels or drivshaft?
__________________
Mods: BBK Intake, BBK LT's and High Flow Cats, Corsa Cat-back exhaust, Hurst short throw shifter, SLP skip-shift eliminator. 7/1/09 Placed order for IOM/IO int/ SS/RS 6M 9/26/09 Took delivery! |
08-13-2011, 11:29 PM | #9 |
Drives: 2010 2SS/RS M6 Black on Black Join Date: Jan 2010
Location: Global Citizen
Posts: 1,243
|
Are the drivehsaft bolts tight? Some have worked loose and fallen out.
__________________
Meh
|
08-13-2011, 11:47 PM | #10 |
CamaroFans.com
|
That's a tough one... but I'm sure we'll get to the bottom of it in a few days and 15 pages...
|
08-14-2011, 01:54 AM | #11 | ||
Booooosted.
|
Quote:
Quote:
Here we go again. Be monday before i can get to it though. |
||
08-14-2011, 06:42 AM | #12 | ||
Truth Enforcer
Drives: anything I can get my hands on Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,797
|
maybe you have an output shaft from an M6...
LMAO
__________________
Never race anything you can't afford to light on fire and push off a cliff
A group as a whole tends to be smarter than the smartest person in that group until one jackass convinces everyone otherwise. Quote:
Quote:
|
||
08-14-2011, 08:38 AM | #13 |
ProCharged 600 + RWHP
Drives: 2SS/RS White/Hugger Orange Join Date: Aug 2009
Location: MI
Posts: 174
|
Mine made the same noise . Sounded like a trans problem. 6 spd
When i had it on the hoist running in 2nd gear i would have sworn it was the trans. But, It was the stock posi it took a shit the next time i went for a drive. DSS 9" is in there now. Good luck.
__________________
|
08-14-2011, 08:55 AM | #14 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
yea, i kinda think that it sounds more like a noise the pumpkin would make...def has a hollow sound that resmbles something inside a case hitting...would be simple enough to pop dshaft out and spin tires...
__________________
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
High Pitched Noise | firefighterEMT33 | 5th Gen Camaro SS LS LT General Discussions | 15 | 10-15-2017 06:15 PM |
New rattle noise at 45 Mph and above... | Edrock | Camaro Issues / Problems | Warranty Discussions | TSB and Recalls | 51 | 01-29-2012 12:51 PM |
Noise Coming From Shifter, Is Dealer Pulling My Chain? | alterbrett | Camaro Issues / Problems | Warranty Discussions | TSB and Recalls | 8 | 08-02-2010 12:46 PM |
odd noise form camaro | camarogolfguy | 5th Gen Camaro SS LS LT General Discussions | 21 | 04-27-2010 06:57 PM |
Weird Air-Leaking noise... | a_Username | Mechanical Maintenance: Break-in / Oil & Fluids / Servicing | 1 | 09-03-2009 09:25 AM |