Anyone make a rear flat black out panel where the bowtie emblem is? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

55Designs · 11-29-2009, 03:19 PM

Does anyone make a die cut magnetic piece in flat black to go left-right across the lower trunk where the bowtie is?

Pissed I removed mine before with no tools and the paint has chips behind the bowtie like during assembly or something.

Didnt want to paint the trunk over this and since I am going to install SS badge dead center I figured a flat black accent would look cool.

Lots of cars at SEMA were rocking that look but I think those were painted.

herkman · 11-30-2009, 08:42 PM

Just received my magnetic one bought off of EBay and it is good quality.

http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT

55Designs · 11-30-2009, 08:50 PM

glad you liked it i did find one of these online but i want one with no cutout for the bowtie. Ill send an email to the ebay guy to see if he can supply one like i want

autoguy · 12-01-2009, 09:11 PM

We have a decal available without the bowtie cutout as well as the one with it cutout.

tjd24 · 12-02-2009, 10:08 AM

Here's the ridergraphix trunk lid blackout in Dark Charcoal Metallic, this has the bow-tie cutout. I highly recommend Brian and his company for quality and service.

THUMPER20X · 12-02-2009, 10:11 AM

Theres a local company near me doing an ABS panel that will go over the bowtie after its removed. probly plain, one with RS SS, and one that says CAMARO in the same style as the fender writing. I believe itll be pull off the bowtie and then its 2 way taped on.

live2well · 12-02-2009, 10:23 AM

Quote:

Originally Posted by tjd24

Here's the ridergraphix trunk lid blackout in Dark Charcoal Metallic, this has the bow-tie cutout. I highly recommend Brian and his company for quality and service.

+1 but in gloss black

[IMG]

[/IMG]

soulrebel · 12-05-2009, 09:27 AM

I just put on a magnetic one that I purchased off ebay. The fit was really good. It has the cutout for the bowtie and it is tight around the edges. When really up close you can see the thickness of the magnetic strip but from a few feet away it is not noticable. I may still get it painted in the spring, but this looks good for now. I orginally got a decal from RPIdesigns but the fit was horrible. Overlaps and gaps with no way to line up evenly. I e-mailed them about the problem but never got a response so they are off my list of future vendors.

tjd24 · 12-05-2009, 09:43 AM

Quote:

Originally Posted by soulrebel

I just put on a magnetic one that I purchased off ebay. The fit was really good. It has the cutout for the bowtie and it is tight around the edges. When really up close you can see the thickness of the magnetic strip but from a few feet away it is not noticable. I may still get it painted in the spring, but this looks good for now. I orginally got a decal from RPIdesigns but the fit was horrible. Overlaps and gaps with no way to line up evenly. I e-mailed them about the problem but never got a response so they are off my list of future vendors.

Just remember to remove the magnetic version every so often to get any moisture off otherwise the paint will cloud over time and a bitch to buff out. I had a magnetic flag on a previous clear coat car and it left a cloud from the moisture over time....

soulrebel · 12-05-2009, 11:06 AM

The vendor that I bought this from had some pretty specific instructions concerning this. Always take off when washing and apply a coat of wax on the area before putting back on and to ocasionally remove to get rid of any moisture build up.

Maro99 · 12-05-2009, 07:18 PM

If someone makes one in real CF you can count me in..

55Designs · 12-05-2009, 07:57 PM

Well considering my car had paint chips beind the bowtie its going to get the holes filled with weld, and painted across in satin black so i dont need to worry about it. I have SS logo in the middle which covers the holes but the paint chipped area is visible

I tried a sample piece of vinyl today but since I touched up the paint chips it was giving me bubbles so I gave up. In my case without fixing the surface vinyl isnt going to look good.

11-29-2009, 03:19 PM	#1
55Designs Drives: 2010 Join Date: Sep 2009 Location: Westchester NY Posts: 990	Anyone make a rear flat black out panel where the bowtie emblem is? Does anyone make a die cut magnetic piece in flat black to go left-right across the lower trunk where the bowtie is? Pissed I removed mine before with no tools and the paint has chips behind the bowtie like during assembly or something. Didnt want to paint the trunk over this and since I am going to install SS badge dead center I figured a flat black accent would look cool. Lots of cars at SEMA were rocking that look but I think those were painted.

12-02-2009, 10:08 AM	#5
tjd24 Thank you Oshawa/St.Cats! Drives: was 2010 2LT RS 2G1FC1EV4A9103434 Join Date: May 2009 Location: NW NJ Posts: 3,481 View My Garage	Here's the ridergraphix trunk lid blackout in Dark Charcoal Metallic, this has the bow-tie cutout. I highly recommend Brian and his company for quality and service. Attached Images __________________ #3434 Born 4-15-2009, Delivered 5-22-2009 BBOMG 2/3/4 - Traded-in 8/31/2019:

12-02-2009, 10:11 AM	#6
THUMPER20X GM fix my PAINT U suck! Drives: 2010 Black 1SS/RS 6Spd Join Date: Sep 2009 Location: Great Red North Posts: 1,856	Theres a local company near me doing an ABS panel that will go over the bowtie after its removed. probly plain, one with RS SS, and one that says CAMARO in the same style as the fender writing. I believe itll be pull off the bowtie and then its 2 way taped on. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
We need help with Electronics wiring diagrams	2SSRS@Gen5diy	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	11	12-13-2009 05:58 PM
Black with Flat Black Stripes	jmill012	Cosmetics and Lighting Modification Discussions	27	06-23-2009 02:55 PM

11-30-2009, 08:42 PM	#2
herkman Drives: 2010 IOM SS/RS, 69 Camaro Join Date: Nov 2008 Location: Douglasville, Georgia Posts: 563	Just received my magnetic one bought off of EBay and it is good quality. http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT

11-30-2009, 08:50 PM	#3
55Designs Drives: 2010 Join Date: Sep 2009 Location: Westchester NY Posts: 990	glad you liked it i did find one of these online but i want one with no cutout for the bowtie. Ill send an email to the ebay guy to see if he can supply one like i want

12-01-2009, 09:11 PM	#4
autoguy Drives: 10 SS,11 SS Pace, 13 ZL1 IOM Join Date: Oct 2008 Location: Pennsylvania Posts: 1,733 View My Garage	We have a decal available without the bowtie cutout as well as the one with it cutout.

12-05-2009, 09:27 AM	#8
soulrebel Drives: 69, 01 & 10 SS Join Date: Jul 2009 Location: Arapahoe, NC Posts: 23	I just put on a magnetic one that I purchased off ebay. The fit was really good. It has the cutout for the bowtie and it is tight around the edges. When really up close you can see the thickness of the magnetic strip but from a few feet away it is not noticable. I may still get it painted in the spring, but this looks good for now. I orginally got a decal from RPIdesigns but the fit was horrible. Overlaps and gaps with no way to line up evenly. I e-mailed them about the problem but never got a response so they are off my list of future vendors.

12-05-2009, 11:06 AM	#10
soulrebel Drives: 69, 01 & 10 SS Join Date: Jul 2009 Location: Arapahoe, NC Posts: 23	The vendor that I bought this from had some pretty specific instructions concerning this. Always take off when washing and apply a coat of wax on the area before putting back on and to ocasionally remove to get rid of any moisture build up.

12-05-2009, 07:18 PM	#11
Maro99 Drives: Heel toe express.. Join Date: Dec 2009 Location: North Charleston, S.C Posts: 1,500	If someone makes one in real CF you can count me in..

12-05-2009, 07:57 PM	#12
55Designs Drives: 2010 Join Date: Sep 2009 Location: Westchester NY Posts: 990	Well considering my car had paint chips beind the bowtie its going to get the holes filled with weld, and painted across in satin black so i dont need to worry about it. I have SS logo in the middle which covers the holes but the paint chipped area is visible I tried a sample piece of vinyl today but since I touched up the paint chips it was giving me bubbles so I gave up. In my case without fixing the surface vinyl isnt going to look good.