How to program new key fob? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

shockandawe · 09-07-2011, 07:51 PM

Quote:

Originally Posted by Mr_Draco

1) stick old key into ignition and turn to "on" (it's the position before "start")
2) turn off and take out old key
3) quickly (like a few seconds) insert new key and turn to "on"

new key should be programmed.

takes 10 seconds to it.

Anybody know if that works on a 2009 Malibu?

Rev_Rock · 05-31-2012, 05:32 PM

The Dealership "They will have to hook it up to the system and it will take an hour AND cost$50!!!"
Reality; Follow these instructions and be done in 10 seconds!

cengell · 06-05-2012, 08:12 PM

I opened my key and saw it was a 2032 quarter size battery, about $5.00 at Walgreens.

Christopher

netz · 06-06-2012, 06:38 PM

Is there anyway to program a remote start key fob to a manual car that doesn't have remote start and then program the remote start button to an aftermarket system like viper?

GearheadSS · 06-07-2012, 05:03 PM

Quote:

Originally Posted by Betro02

To program the key follow Mr Draco instructions for the remote you need a GM Tech II

No you don't. The remote programs with the same process.

Mr_Draco · 06-07-2012, 08:27 PM

Quote:

Originally Posted by GearheadSS

No you don't. The remote programs with the same process.

You do know that post was almost 2 years old right?

abassfield · 11-12-2012, 12:09 PM

Thanks so much for this info, it really works and I called the dealer here to ask what it would cost for me to have the key program $90...

hysonmb · 11-19-2012, 03:39 PM

This is another of the many reasons I love this community!
I just got a new key fob, swapped the blade of the old one into the new one and programmed it for my car in less than 10 minutes!
Thank you!

jeremy87 · 01-30-2013, 04:37 PM

im trying to do the same with my remote but am having trouble switching the blades. is it just as simple as pushing the pin out?

hysonmb · 01-30-2013, 07:01 PM

Quote:

Originally Posted by jeremy87

im trying to do the same with my remote but am having trouble switching the blades. is it just as simple as pushing the pin out?

Yes. I used a tiny small nail to start the process then grabbed the other end with pliers before it fell out. It's tight but doesn't take a lot of force.

jeremy87 · 01-31-2013, 11:05 AM

Quote:

Originally Posted by hysonmb

Yes. I used a tiny small nail to start the process then grabbed the other end with pliers before it fell out. It's tight but doesn't take a lot of force.

Is there a certin side the pin must come out or does it not matter

hysonmb · 01-31-2013, 04:06 PM

Quote:

Originally Posted by jeremy87

Is there a certin side the pin must come out or does it not matter

It doesn't matter.

dbol · 10-21-2014, 03:25 PM

Sorry to revive this thread... my key fob has suffered a button puncture due to other keys in my pocket. I want to order an OEM replacement from somewhere like https://ikeyless.com/vehicles/Chevro...OMAaAnTu8P8HAQ

Is any key cutting required, or will the new key turn in my ignition as it comes from the vendor?

jshaf · 10-21-2014, 07:35 PM

did the key program on my 2010, the message on the DIC will say _key learned, probably "Third Key learned"

05-31-2012, 05:32 PM	#16
Rev_Rock Jewel Red "Baby" 2010 RS Drives: 2010 RS Manual Trans with the works Join Date: May 2012 Location: Flower Mound Texas Posts: 2 View My Garage	The Dealership "They will have to hook it up to the system and it will take an hour AND cost$50!!!" Reality; Follow these instructions and be done in 10 seconds! Last edited by Rev_Rock; 05-31-2012 at 09:23 PM.

01-30-2013, 04:37 PM	#23
jeremy87 Drives: 2010 camaro 2ss/rs Join Date: Feb 2012 Location: katy tx Posts: 24	im trying to do the same with my remote but am having trouble switching the blades. is it just as simple as pushing the pin out? __________________ *IF YOUR NOT FIRST YOUR LAST!*

10-21-2014, 07:35 PM	#28
jshaf Montani Semper Liberi Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010 Location: Masontown, WV Posts: 4,841	did the key program on my 2010, the message on the DIC will say _key learned, probably "Third Key learned" __________________ Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Remote Start System Installation – Need Assistance	Railcar	Camaro DIY & HOW-TO instructions & discussions	27	12-09-2013 04:51 PM
Key Fob Mod LED - My First Mod...	Buhmblbe	Camaro DIY & HOW-TO instructions & discussions	15	12-07-2010 05:23 PM
Key FOB issue	tradosaurus	5th Gen Camaro SS LS LT General Discussions	1	08-28-2010 10:10 AM
Problem with Key Fob anyone?	ffrcobra_65	5th Gen Camaro SS LS LT General Discussions	8	12-12-2009 01:45 PM
2010 Camaro incentive run down as of 9/11	CamaroScotty	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	23	09-14-2009 08:31 AM

06-05-2012, 08:12 PM	#17
cengell Drives: 2017 2LT Garnet Red Join Date: Dec 2011 Location: Streamwood, IL Posts: 125	I opened my key and saw it was a 2032 quarter size battery, about $5.00 at Walgreens. Christopher

06-06-2012, 06:38 PM	#18
netz Drives: 2012 2SS/RS LS3 Join Date: Apr 2012 Location: Orangeburg, SC Posts: 51	Is there anyway to program a remote start key fob to a manual car that doesn't have remote start and then program the remote start button to an aftermarket system like viper?

11-12-2012, 12:09 PM	#21
abassfield Drives: 2010 SS Join Date: Nov 2012 Location: Virginia Posts: 2 View My Garage	Thanks so much for this info, it really works and I called the dealer here to ask what it would cost for me to have the key program $90...

11-19-2012, 03:39 PM	#22
hysonmb Drives: 2010 2SS / RS Join Date: Feb 2011 Location: Waldorf, MD Posts: 227 View My Garage	This is another of the many reasons I love this community! I just got a new key fob, swapped the blade of the old one into the new one and programmed it for my car in less than 10 minutes! Thank you!

10-21-2014, 03:25 PM	#27
dbol Drives: 2010 Camaro SS Join Date: Jul 2009 Location: Miami, FL. Posts: 109	Sorry to revive this thread... my key fob has suffered a button puncture due to other keys in my pocket. I want to order an OEM replacement from somewhere like https://ikeyless.com/vehicles/Chevro...OMAaAnTu8P8HAQ Is any key cutting required, or will the new key turn in my ignition as it comes from the vendor?