2011 ss Convertible muffler fuse pull question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

samman11 · 02-16-2017, 07:01 PM

Am I able to pull a fuse on my 2011 SS convertible to increase the sound of the exhaust system? I've been reading the forum about NPP (what does that stand for) exhaust fuse pull on the 2013 models, but what of the 2011 models?

NC_SS · 02-16-2017, 07:05 PM

Any non 1LE Camaro made before 2013 didn't have the NPP exhaust so there is no fuse pull

EM1/SS · 02-16-2017, 07:15 PM

Get an aftermarket exhaust and it will sound better. Get headers and it will sound a lot better.

CamaroFred · 02-16-2017, 10:44 PM

IIRC, the automatic 'verts have spring loaded flaps, nothing electrical. They should be just behind the trans but do a search to be sure and how to remove them.

It will sound like eight puppies getting neutered at the same time when the AFM kicks in.

samman11 · 02-17-2017, 09:59 AM

Quote:

Originally Posted by EM1/SS

Get an aftermarket exhaust and it will sound better. Get headers and it will sound a lot better.

Yes, I agree. I was looking at the Borla website and was impressed. The video demonstrated between the Touring, S type and ATAK. Wow. I like the S or ATAK. So when someone says "headers" is that the whole new system or only the front part attached to the motor. Is the exhaust separate? How much, for example, INSTALLED, for the S-type Borla on my 2011 SS?

vinman · 02-17-2017, 10:23 AM

Quote:

Originally Posted by NC_SS

Any non 1LE Camaro made before 2013 didn't have the NPP exhaust so there is no fuse pull

The 2012 ZL1 had it

Caseyls3 · 02-17-2017, 04:01 PM

If you plan on doing headers at some point just realize the ATAK is VErY loud.

02-16-2017, 07:01 PM	#1
samman11 Drives: 2011 Camaro SS Convertible Join Date: Nov 2015 Location: Rochester, NY Posts: 671	2011 ss Convertible muffler fuse pull question Am I able to pull a fuse on my 2011 SS convertible to increase the sound of the exhaust system? I've been reading the forum about NPP (what does that stand for) exhaust fuse pull on the 2013 models, but what of the 2011 models?

02-16-2017, 07:05 PM	#2
NC_SS Drives: 2012 M6 Camaro SS (RIP) Join Date: Nov 2014 Location: Virginia Posts: 1,684	Any non 1LE Camaro made before 2013 didn't have the NPP exhaust so there is no fuse pull __________________ Speed engineering 1 7/8 LTs, CAI inc Cold Air Intake, offroad connectors, Solo performance axle back with J pipes, tune, and in need of a driver mod LOL

02-16-2017, 07:15 PM	#3
EM1/SS Drives: 11 2SS/RS M6 vert Join Date: Dec 2010 Location: NSB, FL Posts: 705	Get an aftermarket exhaust and it will sound better. Get headers and it will sound a lot better. __________________ LSA supercharger, Borla S-Type cat back, BMR/ Pedders Suspension, Kooks stepped LT's, GM 3.91, and RDP tune.

02-16-2017, 10:44 PM	#4
CamaroFred Drives: Miss Con Ception Join Date: Aug 2016 Location: Chicagoland Posts: 2,998	IIRC, the automatic 'verts have spring loaded flaps, nothing electrical. They should be just behind the trans but do a search to be sure and how to remove them. It will sound like eight puppies getting neutered at the same time when the AFM kicks in. __________________ 2011 1SS/RS LS3 CGM Last edited by CamaroFred; 02-16-2017 at 10:59 PM.

02-17-2017, 04:01 PM	#7
Caseyls3 Drives: 2011 Camaro SS/RS Convertible Join Date: Jun 2015 Location: Columbus Posts: 444	If you plan on doing headers at some point just realize the ATAK is VErY loud. __________________ 2011 Camaro SS/RS Vert - Jewel Red Tintcoat, 6M, 231/247 Comp Cam, Kooks headers, Borla ATAK, ATI under drive pulley, Richmond 4.10s, LS9 clutch, Hurst shifter, BMR Springs