01-23-2017, 02:13 PM | #1 |
Drives: 2013 Zl1. 550rwhp Join Date: Oct 2016
Location: Naples Fl
Posts: 52
|
Valvetrain Upgrade advice needed
What exactly should I upgrade on my Zl1 valvetrain. Going to be upgrading. And don't want to leave anything out. Probably doing a BTR stage 3 cam. At the same time. Need suggestions on brands and what's the best parts to go with.
I don't want any weak links. Thanks guys.
__________________
2013 Zl1 Ashen Grey metallic
Build in progress aiming for 700+rwhp |
01-23-2017, 09:36 PM | #2 | |
Drives: 02 Z06, 95 Trans Am, 2012 ZL1 Join Date: Mar 2012
Location: Southeast
Posts: 1,838
|
Quote:
__________________
Bryan 2018 ZL1 M6
|
|
01-24-2017, 07:42 AM | #3 |
Drives: 2013 ZL1 M6 Join Date: Oct 2013
Location: Nor Cal
Posts: 1,825
|
To add to Bryan's list above I think these are a really good addition if you want to get the needle bearings out of the valve train.
http://www.straubtechnologies.com/ls...trunnion-kits/ or these from CHE, see info in thread, and pics as well http://www.camaro5.com/forums/showthread.php?t=439241 |
01-24-2017, 08:00 AM | #4 | |
Drives: 2013 Zl1. 550rwhp Join Date: Oct 2016
Location: Naples Fl
Posts: 52
|
Quote:
Thank you for your help!
__________________
2013 Zl1 Ashen Grey metallic
Build in progress aiming for 700+rwhp |
|
01-24-2017, 08:15 AM | #5 | |
Drives: 2013 Zl1. 550rwhp Join Date: Oct 2016
Location: Naples Fl
Posts: 52
|
Quote:
__________________
2013 Zl1 Ashen Grey metallic
Build in progress aiming for 700+rwhp |
|
|
|
|
|