You are browsing camaro5 
 |
|
06-21-2016, 05:52 PM
|
#1 |
 |
MSD 2 step with auto
Has anyone wired up a MSD 2 step with an auto. I want to used the brake pedal to engage. Obviously have a switch to turn on. Also does the msd require tapping in to the tach wire or is it plug n play.
|
|
|
|
06-21-2016, 07:08 PM
|
#2 |
 Drives: 2011 Camaro 2SS/RS Join Date: May 2013
Location: Oklahoma City, OK
Posts: 5
|
2 Steppin.....
Yes. I actually just installed my MSD 2 step today on my Auto car. You have to have a strong power source for the WHITE wire on the unit. The place you get it is under the dash. The BCM has a black plug, there is a WHITE wire in there. Use a Multimeter to test it. The 3rd Brake Light has a 12 volt source that will activate the 2 Step when you hit the brake.
|
|
|
|
|
06-21-2016, 08:24 PM
|
#3 |
|
|
What did you do for the tach wire?
|
|
|
|
|
06-21-2016, 08:32 PM
|
#4 |
|
|
I figured it out now, thank you.
|
|
|
|
|
|
|
|
 |
|
|
