2010 v6 "Raked" look - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

nikos30 · 04-10-2012, 05:45 PM

I cant seem to find a raked looking drop spring set for the v6 under $350.
Specifically, I am looking for a 1.3" inch drop in the back and a 1.5" drop in the front. They have plenty for the v8s...

I know phastek has them, but I cant find one person who has that kit. So i would assume that it probably isnt that good, maybe I am wrong though...

I dont want to buy the "absorber" which is basically an adapter to put on the v8 kits.

Please let me know if anybody could help me out. I can install them myself to save that money.

caliguy · 04-11-2012, 06:45 PM

B&G springs will give you a "rake" look, i have them on my car
http://www.b-gsuspension.com/ look in the gallery of the website of the grey camaro

nikos30 · 04-11-2012, 08:25 PM

You mean this?
http://www.shopatron.com/products/ca...44.29960.0.0.0

thats more drop in the rear than the front which is what I dont want

nikos30 · 04-11-2012, 08:30 PM

any comments on these?
http://www.evasivemotorsports.com/mm...&Store_Code=EM
let me know...they are kinda cheap.

caliguy · 04-11-2012, 10:12 PM

Look at my car in my albums it has a rake, actually it gave me more of a drop then what it says all the way around instead of the 1.4F 1.5R, and i'm on 18's.. Plus factory it has more of a rear gap if you look at your car now and has a rake, so once you install springs you'll still have a rake just lowered all the way around

caliguy · 04-11-2012, 10:16 PM

my friend installed these on his RS has a small rake but looks nice.

Quote:

Originally Posted by nikos30

any comments on these?
http://www.evasivemotorsports.com/mm...&Store_Code=EM
let me know...they are kinda cheap.

nikos30 · 04-11-2012, 10:40 PM

im lookin for more of a raked look but yea...thats the best so far..

caliguy · 04-11-2012, 11:24 PM

Well only way is get coilovers or get bagged, then you can adjust it how you like, but way more $$$$$$$$

Quote:

Originally Posted by nikos30

im lookin for more of a raked look but yea...thats the best so far..

lscamaro · 04-12-2012, 12:19 AM

I have the 1.3" front and 1" rear drop springs from pedders. That work? They are 50 bucks over your budget but well worth the money in my opinion. Petes customer service is second to none and the car rides just like stock

04-10-2012, 05:45 PM	#1
nikos30 HT5 EastSide Drives: 2010 Camaro 2LT Join Date: Aug 2010 Location: NJ/PA Posts: 1,596 View My Garage	2010 v6 "Raked" look I cant seem to find a raked looking drop spring set for the v6 under $350. Specifically, I am looking for a 1.3" inch drop in the back and a 1.5" drop in the front. They have plenty for the v8s... I know phastek has them, but I cant find one person who has that kit. So i would assume that it probably isnt that good, maybe I am wrong though... I dont want to buy the "absorber" which is basically an adapter to put on the v8 kits. Please let me know if anybody could help me out. I can install them myself to save that money. __________________

04-11-2012, 06:45 PM	#2
caliguy Don't ask to pop my hood! Drives: it's loud....... Join Date: Jun 2011 Location: southern cali, Posts: 852	B&G springs will give you a "rake" look, i have them on my car http://www.b-gsuspension.com/ look in the gallery of the website of the grey camaro __________________ *Limo tint rears, 35% sides \| B&G lowering springs \| BowTies Blacked out \| Red Footwells\|Dome Light\|Kicker 500Watts-Amp-Kicker 12" Ported Sub=BOOM\| Stillin Splitter \|Pssst 100 shot\|* *13.36 @102.7 @LVMS \|* *2010*.

04-11-2012, 08:25 PM	#3
nikos30 HT5 EastSide Drives: 2010 Camaro 2LT Join Date: Aug 2010 Location: NJ/PA Posts: 1,596 View My Garage	You mean this? http://www.shopatron.com/products/ca...44.29960.0.0.0 thats more drop in the rear than the front which is what I dont want __________________

04-11-2012, 08:30 PM	#4
nikos30 HT5 EastSide Drives: 2010 Camaro 2LT Join Date: Aug 2010 Location: NJ/PA Posts: 1,596 View My Garage	any comments on these? http://www.evasivemotorsports.com/mm...&Store_Code=EM let me know...they are kinda cheap. __________________

04-11-2012, 10:12 PM	#5
caliguy Don't ask to pop my hood! Drives: it's loud....... Join Date: Jun 2011 Location: southern cali, Posts: 852	Look at my car in my albums it has a rake, actually it gave me more of a drop then what it says all the way around instead of the 1.4F 1.5R, and i'm on 18's.. Plus factory it has more of a rear gap if you look at your car now and has a rake, so once you install springs you'll still have a rake just lowered all the way around __________________ *Limo tint rears, 35% sides \| B&G lowering springs \| BowTies Blacked out \| Red Footwells\|Dome Light\|Kicker 500Watts-Amp-Kicker 12" Ported Sub=BOOM\| Stillin Splitter \|Pssst 100 shot\|* *13.36 @102.7 @LVMS \|* *2010*.

04-11-2012, 10:40 PM	#7
nikos30 HT5 EastSide Drives: 2010 Camaro 2LT Join Date: Aug 2010 Location: NJ/PA Posts: 1,596 View My Garage	im lookin for more of a raked look but yea...thats the best so far.. __________________

04-12-2012, 12:19 AM	#9
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	I have the 1.3" front and 1" rear drop springs from pedders. That work? They are 50 bucks over your budget but well worth the money in my opinion. Petes customer service is second to none and the car rides just like stock __________________ Click Picture for Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thinking about getting a 2010 V6 Camaro need advise	DwDrummer	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	34	09-03-2010 04:14 PM
Nitrous Express Nitrous Kits Available for the 2010 Camaro V6 & V8!	Kris@BMCPerformance	Forced Induction	5	11-04-2009 09:46 AM
New Zex 2010 Camaro V6 Nitrous Kit - intro and free shipping @ PFYC.com	Redshift	Forced Induction	0	07-16-2009 08:31 AM