You are browsing camaro5 
 |
|
07-23-2017, 10:32 PM
|
#1 |
 Drives: 2013 Camaro 2SS "Diablo" Join Date: Jan 2016
Location: California
Posts: 135
|
Power Sterling Issues
Some background on the car; it is a twin turbo camaro with the agp set up. Stock motor and internals, fuel upgrades and what not!
When I do hard pulls from 2nd to 3rd usually I will lose the power steering and the dash will say "service power steering". After about another 20 minutes of normal driving it will go away and the steering will return to normal. Sometimes it requires a restart of the car to get the power steering to work again. Anyone ever had this issue?
__________________
Diablo - 2013 Camaro 2SS
Mod List: GM NPP Dual mode exhaust(Fuse pulled), AGP Twin Turbo 54/57, ZL1 Fuel pump with flex fuel sensor, ADM FPCM, ID1000 Injectors, diamond racing forged pistons, BTR twin turbo cam stage 2, Lunati forged H beam rods, BTR trunnions, ARP head studs, Vararam power wedge, MightyMouse Wild catch can, PFADT 1.25" drop springs, BMR Strut tower brace, 20x10.5 Giovanna Mecca rear and 20x9 Giovanna Mecca fronts, R1 Concepts drilled and slotted rotors, Hawk HPS pads, Night Owl RGB halo kit, and more... Future Mods: Dual fuel pump and more... |
|
|
|
07-24-2017, 09:14 AM
|
#2 |
|
Evil Genius of Chevrolet
Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017
Location: New York
Posts: 3,260
|
Sounds like the bcm is getting a short signal on hard acceleration. Any harness with wires melted?
__________________
GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.
|
|
|
|
|
07-25-2017, 10:34 PM
|
#3 |
|
Drives: 2013 Camaro 2SS "Diablo" Join Date: Jan 2016
Location: California
Posts: 135
|
Where should I be looking for it?
__________________
Diablo - 2013 Camaro 2SS
Mod List: GM NPP Dual mode exhaust(Fuse pulled), AGP Twin Turbo 54/57, ZL1 Fuel pump with flex fuel sensor, ADM FPCM, ID1000 Injectors, diamond racing forged pistons, BTR twin turbo cam stage 2, Lunati forged H beam rods, BTR trunnions, ARP head studs, Vararam power wedge, MightyMouse Wild catch can, PFADT 1.25" drop springs, BMR Strut tower brace, 20x10.5 Giovanna Mecca rear and 20x9 Giovanna Mecca fronts, R1 Concepts drilled and slotted rotors, Hawk HPS pads, Night Owl RGB halo kit, and more... Future Mods: Dual fuel pump and more... |
|
|
|
|
07-25-2017, 10:44 PM
|
#4 |
 
Drives: 2014 Chevy Camaro 2SS Join Date: Jan 2015
Location: Derby, KS
Posts: 49
|
Well I am having the same issue with my 2014 Camaro SS. It is procbarged. We have replaced the complete steering rack twice, built all new harnesses, changed PCM,battery, Alternator, ground wires to heavier ones and a bunch of other stuff and still having the issue. The dealership is having GM check into it now. We are clueless what else it could possible be.
__________________
2014 2SS/RS, L99 Procharged (D1SC) on Meth, ZL1 Fuel Pump, 85 lbs Injectors,Vitesse Throttle Controller, Bo White Ported TB, Kooks LT Headers, Stainless Works exhaust, GPI SS3 Cam, GPI Heads, GPI Intake Mods, Circle D triple Disk 2C Converter, DSS Carbon Fiber D/S, G Force Outlaw Axles and tuned by Ryan Stevens at GPI 774/697
|
|
|
|
|
07-27-2017, 02:04 PM
|
#5 |
|
Drives: 2013 Camaro 2SS "Diablo" Join Date: Jan 2016
Location: California
Posts: 135
|
Keep me up to date because it is annoying.
__________________
Diablo - 2013 Camaro 2SS
Mod List: GM NPP Dual mode exhaust(Fuse pulled), AGP Twin Turbo 54/57, ZL1 Fuel pump with flex fuel sensor, ADM FPCM, ID1000 Injectors, diamond racing forged pistons, BTR twin turbo cam stage 2, Lunati forged H beam rods, BTR trunnions, ARP head studs, Vararam power wedge, MightyMouse Wild catch can, PFADT 1.25" drop springs, BMR Strut tower brace, 20x10.5 Giovanna Mecca rear and 20x9 Giovanna Mecca fronts, R1 Concepts drilled and slotted rotors, Hawk HPS pads, Night Owl RGB halo kit, and more... Future Mods: Dual fuel pump and more... |
|
|
|
|
08-05-2017, 11:36 PM
|
#6 |
|
Drives: 2013 Camaro 2SS "Diablo" Join Date: Jan 2016
Location: California
Posts: 135
|
Met a guy with a turbo camaro having the same issues.
__________________
Diablo - 2013 Camaro 2SS
Mod List: GM NPP Dual mode exhaust(Fuse pulled), AGP Twin Turbo 54/57, ZL1 Fuel pump with flex fuel sensor, ADM FPCM, ID1000 Injectors, diamond racing forged pistons, BTR twin turbo cam stage 2, Lunati forged H beam rods, BTR trunnions, ARP head studs, Vararam power wedge, MightyMouse Wild catch can, PFADT 1.25" drop springs, BMR Strut tower brace, 20x10.5 Giovanna Mecca rear and 20x9 Giovanna Mecca fronts, R1 Concepts drilled and slotted rotors, Hawk HPS pads, Night Owl RGB halo kit, and more... Future Mods: Dual fuel pump and more... |
|
|
|
|
08-06-2017, 05:58 AM
|
#7 |
         
Drives: 2010 Inferno Orange 2SS/RS Join Date: Apr 2010
Location: Clermont, IN
Posts: 3,297
|
Hmmmm.....anybody think that maybe it's the pump itself?
__________________
2010 Inferno Orange 2SS/RS M6 Black Leather, Sun Roof, OBX Headers, Borla touring axle back, Cold Air Inductions CAI , non synthetic fluids, BMR total bushing upgrade/1" lowering springs, DSE 32mm rear sway bar. GM fe4 shocks/struts/LCA's, AAM 3.91 diff, Vertini RFS1.8 20x9 +30. Conti ExtremeContact Sport 275/35/20. sjm autoprod ABL dash kit. Mike Norris tuned 413/419.
Avenging Orange: 43 years of not buying into the Hype........and damn proud of it!! https://youtu.be/9JD9it6SmB8 https://youtu.be/xmelTlEzI34 KICKING CANCERS ASS SINCE 2015!! |
|
|
|
|
08-06-2017, 10:37 AM
|
#8 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
08-06-2017, 11:15 AM
|
#9 | |
|
2013 ZL1
Drives: 2013 ZL1 m6 Join Date: Oct 2010
Location: Avondale AZ & Indy will always be home
Posts: 870
|
Quote:
There is a thread in the ZL1 section on power steering issues, but nothing that was related to acceleration only that i remember. I do find it odd that those that have posted so far with the acceleration loss all are turbocharged. Maybe it is a heat too close to a sensor or the rack itself. Don't know, just a thought to throw out there. |
|
|
|
|
|
08-06-2017, 02:20 PM
|
#10 | |
|
Drives: 2010 Inferno Orange 2SS/RS Join Date: Apr 2010
Location: Clermont, IN
Posts: 3,297
|
Quote:
__________________
2010 Inferno Orange 2SS/RS M6 Black Leather, Sun Roof, OBX Headers, Borla touring axle back, Cold Air Inductions CAI , non synthetic fluids, BMR total bushing upgrade/1" lowering springs, DSE 32mm rear sway bar. GM fe4 shocks/struts/LCA's, AAM 3.91 diff, Vertini RFS1.8 20x9 +30. Conti ExtremeContact Sport 275/35/20. sjm autoprod ABL dash kit. Mike Norris tuned 413/419.
Avenging Orange: 43 years of not buying into the Hype........and damn proud of it!! https://youtu.be/9JD9it6SmB8 https://youtu.be/xmelTlEzI34 KICKING CANCERS ASS SINCE 2015!! |
|
|
|
|
|
|
|
|
 |
|
|
