Passing inspection with tune - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Batmanntexas · 04-19-2021, 08:22 PM

Quote:

Originally Posted by TheFlyingBananaSS

Well I was going to try but I never got to it over the weekend. But I did manage to buy a new house on Saturday! My baby will be in a garage soon. Hopefully I can get to it this weekend if it doesn't rain.

I have attached a file that I have used several times to get past the OBII portion of the emissions test. Let us know how it goes....

-Scott

TheFlyingBananaSS · 04-19-2021, 08:27 PM

Thank you Scott.

punk5150 · 04-19-2021, 08:42 PM

I had a similar issue here in NJ.
Shoot me a pm and I will send you what worked for me.

AlanRubin · 04-21-2021, 01:26 AM

There is no EGR, so that will always be N/A.

Ruger2506 · 05-16-2021, 03:50 PM

Quote:

Originally Posted by TheFlyingBananaSS

I'll take a look in the tune tonight and see what's on or off. Worse case I can always register it in florida with family address.

That's what I would do. That sucks you live in a state that is so dictator like

tartagliazl1 · 05-17-2021, 07:57 AM

I’m in NY and have no problems with passing inspections, cars been tuned 4 times since I’ve owned it. My monitors are all on and ready. Has to be in the tune like other have mentioned. Eric probably tuned them off in hp tuners. I don’t know why anyone would do that.

TheFlyingBananaSS · 05-30-2021, 07:57 AM

So I just got back home last night. I've been in Florida for the past 5 weeks because my Father passed away. I had to manage his estate. I hope to be able to pick up where I left off this week if it stops raining here. Been a long month for me.

larry_g · 05-30-2021, 10:50 AM

Sorry for your loss.

Sent from my Pixel 5 using Tapatalk

morepowerjoe · 05-30-2021, 12:01 PM

Yeah sorry buddy.

Chris49066SS · 06-01-2021, 11:46 AM

Sorry for your loss

TheFlyingBananaSS · 06-01-2021, 12:58 PM

Thank you. I appreciate you guys.

TheFlyingBananaSS · 06-14-2021, 06:28 AM

Made a couple changes in the codes section of the tune. A couple boxes weren't checked off. Fingers crossed.

joshnmn · 06-14-2021, 08:56 AM

I was just reviewing mine. Make sure they all get to a readiness state. I have 3 right now that won’t. Gotta check on those

TheFlyingBananaSS · 06-22-2021, 05:16 PM

Yesterday I passed inspection!! While getting an alignment done for the track the shop owner said he can do a few changes so it can pass. He nailed it. Drove it for 3 days and poof, done. Thanks everyone for your assistance with this. If anyone else in NY needs help passing let me know.

04-19-2021, 08:27 PM	#16
TheFlyingBananaSS Evil Genius of Chevrolet Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017 Location: New York Posts: 3,260	Thank you Scott. __________________ GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.

05-17-2021, 07:57 AM	#20
tartagliazl1 Drives: 2013 zl1 vert Join Date: Dec 2018 Location: Rochester, New york Posts: 949	I’m in NY and have no problems with passing inspections, cars been tuned 4 times since I’ve owned it. My monitors are all on and ready. Has to be in the tune like other have mentioned. Eric probably tuned them off in hp tuners. I don’t know why anyone would do that. __________________ 22% lower/ 2.5 upper/ 2” headers/ cat delete/ x-pipe/ 2 gallon x tank/ 100-3 pump/ fic 850/ dsx aux kit/ 103mm throttle body/ RPM 5” intake/ meth kit/ prometh lid injection/FI interchiller/ 160* stat/ ngk-7/ msd wires/ elite catch can/ tsp cam/ Che trunnions/ ported supercharger/ 1/2” lid spacer/ brick mod/BMR toe and trailing arms/ 751hp 757 tq SAE @17.3lb on a loaded dyno.

05-30-2021, 07:57 AM	#21
TheFlyingBananaSS Evil Genius of Chevrolet Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017 Location: New York Posts: 3,260	So I just got back home last night. I've been in Florida for the past 5 weeks because my Father passed away. I had to manage his estate. I hope to be able to pick up where I left off this week if it stops raining here. Been a long month for me. __________________ GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.

05-30-2021, 10:50 AM	#22
larry_g Drives: 2014 1SS/1LE Join Date: Nov 2015 Location: Louisville, KY Posts: 826	Sorry for your loss. Sent from my Pixel 5 using Tapatalk __________________ 830 WHP 700 WTQ, Whipple 2.9 @ 13lbs Boost, Flex Fuel Tune by Blevins Tuning, LSA SBE, 3.5 GripTec, ATI LS3 Damper, AFR 260cc Mongoose, ARP Studs, Yella Terra Ultralites, Johnson 2110R, BTR PDS Stage 3, Melling 10355, Improved Racing Baffle, ID1050X, DSX Triple Fuel Pump, RotoFab CAI, NW 103mm TB, Stainless Works 1-7/8" LTH to 3" Speed Eng w/ X-pipe to NPP, Powermaster 9509 XS, Detroit Speed Motor Mounts, MGW, Monster LT1-S, ZL1 Calipers, DBA Rotors & Pads, Bilstein B6 Struts & Shocks, BMR 1.25" Drop Springs & Adj Rear Bar, Pegasus Solid Bushings, Z/28 Wheels, other misc parts.

05-30-2021, 12:01 PM	#23
morepowerjoe Drives: 2012 Chevrolet Camaro l99 Join Date: Aug 2020 Location: Austin, TX Posts: 2,097	Yeah sorry buddy. __________________ DSS FX Forged Pistons, Eagle ESP L19 Forged Rods, ARP Head and Main Studs, TSP PRC 260 CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Performance Racing Lifters, CHE Trunnions , Molly Pushrods, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP 1 7/8" Longtubes with 3" TSP Exhaust, ZL1 Fuel Pump, Mishimoto Radiator, Mishimoto Oil Cooler, Tru Cool 40k Tranny Cooler, 3600 Circle D Converter, Fluid Dynamics Balancer Build Thread https://www.camaro5.com/forums/showthread.php?t=609817

04-19-2021, 08:42 PM	#17
punk5150 Drives: 2014 SS/RS CRT Join Date: Jan 2014 Location: Jersey Posts: 339	I had a similar issue here in NJ. Shoot me a pm and I will send you what worked for me.

04-21-2021, 01:26 AM	#18
AlanRubin Banned Drives: 2010 LS Join Date: Feb 2021 Location: Pgh Posts: 411	There is no EGR, so that will always be N/A.

06-01-2021, 11:46 AM	#24
Chris49066SS Drives: 2010 SS L99 Join Date: Sep 2018 Location: Missouri Posts: 1,634	Sorry for your loss __________________ Previous PB:11.079 @ 122.99mph.. New setup time: TBD The 11.079 pass: https://youtu.be/pz27Zq54t_E Build thread - www.camaro5.com/forums/showthread.php?t=555371

06-01-2021, 12:58 PM	#25
TheFlyingBananaSS Evil Genius of Chevrolet Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017 Location: New York Posts: 3,260	Thank you. I appreciate you guys. __________________ GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.

06-14-2021, 06:28 AM	#26
TheFlyingBananaSS Evil Genius of Chevrolet Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017 Location: New York Posts: 3,260	Made a couple changes in the codes section of the tune. A couple boxes weren't checked off. Fingers crossed. __________________ GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.

06-14-2021, 08:56 AM	#27
joshnmn 2&THEHIT Drives: 5th Gen Camaro; 5th Gen Ram 3500 Join Date: Mar 2018 Location: Garner, NC Posts: 1,012 View My Garage	I was just reviewing mine. Make sure they all get to a readiness state. I have 3 right now that won’t. Gotta check on those

06-22-2021, 05:16 PM	#28
TheFlyingBananaSS Evil Genius of Chevrolet Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017 Location: New York Posts: 3,260	Yesterday I passed inspection!! While getting an alignment done for the track the shop owner said he can do a few changes so it can pass. He nailed it. Drove it for 3 days and poof, done. Thanks everyone for your assistance with this. If anyone else in NY needs help passing let me know. __________________ GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.