Polished Whipple Installed! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

rtkjadams · 09-25-2010, 12:50 AM

Finishing up the install..... pretty easy, except for a couple bolts on the SC. Painted a few things and rerouted some wires and hoses to clean up the engine bay somewhat... Car already has LT's, Catless, and Fastlane CAI, Full Pedders bushings, and lowered with Pedders springs...

Here is a custom bowtie...

It's looks painted, but it is lite up with about 20 leds....

FINALLYSATISFIED · 09-25-2010, 01:01 AM

...I can't wait for the day to get my SC installed, one thing at a time(i keep tellin' myself)

BigDan · 09-25-2010, 01:30 AM

Nice choice in supercharger, I bet it wont be long before your wanting to increase the boost on that 2.9L and let it do work on that LS3 at 15psi w/ new pistons.

Looks purdy

WadeWilson · 09-25-2010, 01:35 AM

Love your choice in S/C and color!! My Whipple is getting installed in less than 2 weeks. Love your custom work too!!

GMRULZ · 09-25-2010, 08:00 AM

Very nice!!! I have the same color car and a a polished Whipple which may ship this week coming up. They just recieved my money yesterday. I love the way you painted yours. I think I will have to do the same thing, but I will probably only do the valve covers and the jack shaft cover. My ADM CAI is already painted. But awesome idea to do that.

Make sure you get us some dyno numbers, post graphs if you can, and info on your setup!

1stTimeV8r · 09-25-2010, 09:47 AM

I love the polished Whipple!!

Guardian · 09-25-2010, 10:21 AM

That looks amazing. Not only the polished whipple but the clean up and accents you did. I love clean engine bays.

Andro · 09-25-2010, 10:27 AM

Looking Good

audiomikej · 09-25-2010, 11:19 AM

Caliman93230 · 09-25-2010, 01:33 PM

Quote:

Originally Posted by GMRULZ

Very nice!!! I have the same color car and a a polished Whipple which may ship this week coming up. They just recieved my money yesterday. I love the way you painted yours. I think I will have to do the same thing, but I will probably only do the valve covers and the jack shaft cover. My ADM CAI is already painted. But awesome idea to do that.

Make sure you get us some dyno numbers, post graphs if you can, and info on your setup!

Mike@Whipple · 09-25-2010, 01:41 PM

Looking pretty darn sweet.

94guy · 09-25-2010, 02:27 PM

how did you tighten down the 2 very front bolts upside down and the 2 in the rear? i used a allen wrench on the front and a allen socket on the rear but could not use a inch lb torque wrench on them.

rtkjadams · 09-25-2010, 03:14 PM

I didnt use a trq wrench on those bolts.... I used the same thing as you...

Ray

2010 SSRS · 09-25-2010, 03:15 PM

Looks great

09-25-2010, 12:50 AM	#1
rtkjadams Drives: Red Jewel SS Join Date: Sep 2009 Location: S.Florida Posts: 59	Polished Whipple Installed! now with dyno #'s Finishing up the install..... pretty easy, except for a couple bolts on the SC. Painted a few things and rerouted some wires and hoses to clean up the engine bay somewhat... Car already has LT's, Catless, and Fastlane CAI, Full Pedders bushings, and lowered with Pedders springs... Here is a custom bowtie... It's looks painted, but it is lite up with about 20 leds.... Last edited by rtkjadams; 11-30-2010 at 03:00 PM.

09-25-2010, 08:00 AM	#5
GMRULZ Drives: 2010 SS & 2008 C6 Join Date: Mar 2008 Location: VA Posts: 1,819	Very nice!!! I have the same color car and a a polished Whipple which may ship this week coming up. They just recieved my money yesterday. I love the way you painted yours. I think I will have to do the same thing, but I will probably only do the valve covers and the jack shaft cover. My ADM CAI is already painted. But awesome idea to do that. Make sure you get us some dyno numbers, post graphs if you can, and info on your setup! __________________ 2010 SS L99, 536rwhp 10.843@126.72. Whipple Supercharger stock pulley, ARH 1 7/8 longtubes w/ catted xpipe, magnaflow 3" mufflers, ADM Race CAI, 3:70 gears, lightweight wheels and nitto drag radials. Stock internal L99, stock converter. Bolt on best before blower 12.22@113.29 w/ nothing but ARH headers, catted x-pipe, ADM CAI and a tune on stock Pzero`s! Other car 2008 C6 Ls3, z51, A6, Npp Exhaust, best bonestock pass 11.80@118.82, Number 2 on the Corvette Forums Bonestock fastest list..

09-25-2010, 09:47 AM	#6
1stTimeV8r War Damn Eagle!! Drives: VR 2SS Join Date: Dec 2009 Location: Huntsville, AL Posts: 203 View My Garage	I love the polished Whipple!! __________________ VR 2SS RS M6 Hot Wife, 2.8 KB, LS9 Cam, SPEC 3+ clutch, KW Variant 1 Coilovers, Pfadt F/R Sways, BMR Sub-Frame Connectors, BMR Tunnel Brace, LSR Performance Tri-Ax Shifter, BMR Trailing Arms, Kooks 1 7/8" LT Headers, MagnaFlow 3" Cat-Back Exhaust, Fesler Dual Gauge Pod w/AutoMeter A/F & Boost, ShowStopper UnderHood Accessories.....Tuned by John@APF = 627RWHP/542RWTQ

09-25-2010, 10:27 AM	#8
Andro NOICE!!! ™ Drives: Force Fed 427 Join Date: Jan 2009 Location: GOT BOOST? Posts: 5,214 View My Garage	Looking Good __________________

09-25-2010, 03:15 PM	#14
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	Looks great __________________ Jannetty Racing JRE Street Package

09-25-2010, 01:01 AM	#2
FINALLYSATISFIED Est.1775 Drives: '15 Challenger Hellcat (sold) Join Date: Sep 2009 Location: SoCal Posts: 5,502	...I can't wait for the day to get my SC installed, one thing at a time(i keep tellin' myself)

09-25-2010, 01:30 AM	#3
BigDan Drives: bug Join Date: May 2009 Location: nv Posts: 1,319	Nice choice in supercharger, I bet it wont be long before your wanting to increase the boost on that 2.9L and let it do work on that LS3 at 15psi w/ new pistons. Looks purdy

09-25-2010, 01:35 AM	#4
WadeWilson How U Doin? Drives: 2014 CTS-V Coupe Join Date: Oct 2008 Location: Californication Posts: 24,156 View My Garage	Love your choice in S/C and color!! My Whipple is getting installed in less than 2 weeks. Love your custom work too!!

09-25-2010, 10:21 AM	#7
Guardian Drives: 2004 Tiburon SE Join Date: Sep 2010 Location: New London CT Posts: 5	That looks amazing. Not only the polished whipple but the clean up and accents you did. I love clean engine bays.

09-25-2010, 11:19 AM	#9
audiomikej Drives: the wife crazy talking Camaros Join Date: Aug 2010 Location: Lincoln, NE Posts: 277 View My Garage

09-25-2010, 01:41 PM	#11
Mike@Whipple Whipplecharged Drives: 1956 Chevy 3100 Join Date: Sep 2010 Location: Fresno, CA Posts: 44	Looking pretty darn sweet.

09-25-2010, 02:27 PM	#12
94guy Drives: 99 Camaro; 2010 Camaro 2SS/RS Join Date: Nov 2009 Location: louisiana Posts: 1,966	how did you tighten down the 2 very front bolts upside down and the 2 in the rear? i used a allen wrench on the front and a allen socket on the rear but could not use a inch lb torque wrench on them.

09-25-2010, 03:14 PM	#13
rtkjadams Drives: Red Jewel SS Join Date: Sep 2009 Location: S.Florida Posts: 59	I didnt use a trq wrench on those bolts.... I used the same thing as you... Ray

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kenne Bell 2010 camaro kits 2.8, 3.6, 4.2 available	redsap05	Forced Induction - V8	265	02-01-2010 03:04 PM
FYI - Rally Stripes Will Be Factory Installed	talwell	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	13	08-28-2009 09:35 AM
Doug Thorleys headers installed	norcalwheelman	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	34	07-23-2009 11:48 AM
factory installed vs gm rally stripe kit	camaro1	Cosmetics and Lighting Modification Discussions	5	07-14-2009 10:05 AM