07-29-2018, 03:12 PM | #1 |
Pay attention to details
Drives: 2012 ZL1 Join Date: Aug 2016
Location: California
Posts: 54
|
LED light bulbs on a 2012 ZL1 Camaro
Has anyone ran into an issue when installing LED bulbs that causes the turn signals to cancel when the headlights are turned on?
|
07-30-2018, 08:13 PM | #2 |
Drives: 2014 1LS M6 Supercharged Join Date: Feb 2011
Location: New Britain, Ct
Posts: 937
|
That can be caused by a loose or bad connection.
did the car originally have LED's?? if not, did you add a resistor to gnd?? |
07-31-2018, 11:14 PM | #3 |
Pay attention to details
Drives: 2012 ZL1 Join Date: Aug 2016
Location: California
Posts: 54
|
I added the LED's. The sockets are the standard type versus the CK type. These are supposed to be the correct setup.
|
08-01-2018, 06:19 PM | #4 |
Drives: 2014 1LS M6 Supercharged Join Date: Feb 2011
Location: New Britain, Ct
Posts: 937
|
Im sure that the 2012's did not come with LED's, if you bought a kit, it should have come with resistors, The stock bulbs draw a lot of current, LED's do not. your blinker is designed for the draw of reg bulbs, you must add a resistor to ground to add more current draw to make the blinker work.
|
08-01-2018, 08:47 PM | #5 |
Pay attention to details
Drives: 2012 ZL1 Join Date: Aug 2016
Location: California
Posts: 54
|
I bought load resistors with the LED's.
|
08-01-2018, 09:26 PM | #6 |
Drives: 2014 1LS M6 Supercharged Join Date: Feb 2011
Location: New Britain, Ct
Posts: 937
|
How are they connected??
|
|
|
Thread Tools | |
|
|