FS: 3" Kooks Full Exhaust w/ DMH Cutouts - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jrpxxii · 09-02-2012, 07:57 PM

I have a very slightly used Kooks 3" full exhause sytem that mounts from the headers all the way thru the mufflers. Super nice exhaust and sounds incredble and fitment it excellent. I also have a set of DMH cutouts mounted on the exhaust and really make this car sound aggressive with a flip of a switch. The exhaust is in Cincinnati, OH and needs to be picked up at Cincy Speed as its too hard to ship. I am asking $1000 for the entire system and is ready to mount and go as there is no damage and you can save alot of money on this setup.

jsharp · 09-02-2012, 10:40 PM

Cats or no cats?

jrpxxii · 09-03-2012, 03:07 PM

No cats

Whipped416 · 09-04-2012, 06:55 AM

nice deal!!!

RonniesCamaroSS · 09-04-2012, 03:24 PM

could you possibly just sell the x-pipe or is it all gota go?

was619 · 09-05-2012, 12:36 AM

I'd really like to buy just the headers and connection pipes with the cut outs if your willing to break it up from the front parts to the catback.
thanks
Will

jrpxxii · 09-17-2012, 03:21 PM

I will take $900 to get this out of my way

jsharp · 09-17-2012, 07:08 PM

I just bought a 3" kooks catback and gutted the cats. I wanted cutouts as well. If this had been available before I would deffinetly purchase it! If somone wants mine for 900 I will buy yours lol

jrpxxii · 09-17-2012, 07:14 PM

Quote:

Originally Posted by jsharp

I just bought a 3" kooks catback and gutted the cats. I wanted cutouts as well. If this had been available before I would deffinetly purchase it! If somone wants mine for 900 I will buy yours lol

Sorry I have had it posted for awhile and figured someone would take this up right away as this is dirt cheap for all of this.

whitedemon · 09-17-2012, 09:46 PM

I want the cut outs if you decide to separate send me a pm. Thanks

phntmss · 09-17-2012, 10:01 PM

too bad it couldnt be shipped id really like to get this... glws!

jrpxxii · 09-18-2012, 09:50 AM

Quote:

Originally Posted by phntmss

too bad it couldnt be shipped id really like to get this... glws!

It can be shipped Id just prefer not to but I can box it all up and ship it. Im guessing shipping would cost about $80-100 if you want to buy it and have it shipped

DriveItLikeYouStoleIt · 09-18-2012, 01:30 PM

If I can use this without needing a tune I want it.

jrpxxii · 09-18-2012, 03:24 PM

Quote:

Originally Posted by DriveItLikeYouStoleIt

If I can use this without needing a tune I want it.

Yes you can absolutely use this without a tune.

09-02-2012, 07:57 PM	#1
jrpxxii Drives: 2010 Camaro SS/RS 427ci Join Date: Jul 2009 Location: Bowling Green, Ky Posts: 3,355	FS: 3" Kooks Full Exhaust w/ DMH Cutouts I have a very slightly used Kooks 3" full exhause sytem that mounts from the headers all the way thru the mufflers. Super nice exhaust and sounds incredble and fitment it excellent. I also have a set of DMH cutouts mounted on the exhaust and really make this car sound aggressive with a flip of a switch. The exhaust is in Cincinnati, OH and needs to be picked up at Cincy Speed as its too hard to ship. I am asking $1000 for the entire system and is ready to mount and go as there is no damage and you can save alot of money on this setup. __________________

09-02-2012, 10:40 PM	#2
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Cats or no cats? __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

09-03-2012, 03:07 PM	#3
jrpxxii Drives: 2010 Camaro SS/RS 427ci Join Date: Jul 2009 Location: Bowling Green, Ky Posts: 3,355	No cats __________________

09-05-2012, 12:36 AM	#6
was619 Billy The Kid Drives: Cyber Grey 2SS/RS Join Date: Jun 2009 Location: North Alabama Posts: 637	I'd really like to buy just the headers and connection pipes with the cut outs if your willing to break it up from the front parts to the catback. thanks Will __________________ CGM 2SS/RS[SIZE="1"] Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels

09-17-2012, 03:21 PM	#7
jrpxxii Drives: 2010 Camaro SS/RS 427ci Join Date: Jul 2009 Location: Bowling Green, Ky Posts: 3,355	I will take $900 to get this out of my way __________________

09-04-2012, 06:55 AM	#4
Whipped416 Drives: 2010 CAMARO SS Join Date: Mar 2011 Location: Texas Posts: 1,515 View My Garage	nice deal!!!

09-04-2012, 03:24 PM	#5
RonniesCamaroSS Drives: 2011 SS camaro Join Date: Feb 2012 Location: bryant, Ar Posts: 206 View My Garage	could you possibly just sell the x-pipe or is it all gota go?

09-17-2012, 07:08 PM	#8
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	I just bought a 3" kooks catback and gutted the cats. I wanted cutouts as well. If this had been available before I would deffinetly purchase it! If somone wants mine for 900 I will buy yours lol __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

09-17-2012, 09:46 PM	#10
whitedemon Drives: 2010 Camaro SS Join Date: Dec 2011 Location: Louisiana Posts: 183	I want the cut outs if you decide to separate send me a pm. Thanks __________________ 2010 Camaro 2SS/RS, L99, OBX Longtube Headers, Magnaflow 3in Comp Cat Back w/ added Dynomax Bullet Race Mufflers, SCT Tuner w/ JRE Tune, CAI Black Intake w/ JRE Race Scoop, Eibach Pro Springs, Custom Sequential Tailights

09-17-2012, 10:01 PM	#11
phntmss Drives: 2011 Camaro SS/RS Join Date: Dec 2010 Location: Nebraska Posts: 544	too bad it couldnt be shipped id really like to get this... glws! __________________ 2011 SS/RS @ home 12/28/2010

09-18-2012, 01:30 PM	#13
DriveItLikeYouStoleIt Drives: 2011 SS Join Date: Jul 2012 Location: Irvine, CA Posts: 24	If I can use this without needing a tune I want it.