05-17-2020, 11:44 PM | #15 |
Drives: 2015 ZL1 Join Date: Jun 2015
Location: florida
Posts: 487
|
Are you on stock tires are they spinning?
|
05-18-2020, 03:29 AM | #16 |
1000hp is NEVER Enough!
|
|
05-18-2020, 02:04 PM | #17 |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,296
|
I wanted to update this thread as I took my car to the Chevy dealer this morning and they got right on it and I can happily say all is good. Car tracks good and no more whipping around and trying to put me in the ditch. Thanks to all of you that responded to my concerns about this problem I had. This is sure a good group of people here and I want everyone to know that I appreciate it very much. Thanks again.
|
05-18-2020, 03:12 PM | #18 |
Drives: 2010 2SS LS3 and 1978 STROKER 383 Join Date: Feb 2018
Location: Czech Republic
Posts: 1,592
|
I see that your ZL1 is fine again and you are satisfied.
That is very well. I wish you a lot of fun and many happy miles |
05-18-2020, 03:35 PM | #19 |
1000hp is NEVER Enough!
|
Congrats!
I am glad it is fixed and you are Happy again. Did they say what was the issue?
Have fun and enjoy your car! |
05-18-2020, 07:18 PM | #20 |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,296
|
I will tmrw post up the paperwork on the alignment numbers they used to correct my car. I would do it now but I did not think of doing that earlier and my car is in my shop with the paperwork still in it. I am home and in for the night so I will try to get that done before noon tmrw. It was out of alignment and I guess the geometry was off.
|
05-18-2020, 09:36 PM | #21 |
I took mine this morning too, but I have not heard anything yet. Glad yours is good to go.
__________________
JRE 750 HP package
Rag Top Rob |
|
05-20-2020, 06:34 PM | #22 |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,296
|
Here are the alignments they did.
|
05-21-2020, 02:45 AM | #23 |
1000hp is NEVER Enough!
|
Thanks for the update
|
05-21-2020, 11:16 AM | #24 | |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,296
|
Quote:
I guess. I know it scared the crap out of me when I hit passing gear! It almost put me in the ditch! The car started whipping back and forth and it was all I could do to get it straight again. It is good now though. |
|
05-21-2020, 03:20 PM | #25 | |
Drives: 2010 2SS LS3 and 1978 STROKER 383 Join Date: Feb 2018
Location: Czech Republic
Posts: 1,592
|
Quote:
When I see the values before setting, it must have been a great ride But you see ... It all ended well |
|
|
|
|
|