10-07-2018, 01:13 PM | #1 |
P0330 Bank 2 knock sensor
My 2010 LS3 SS has been throwing a code P0330 for bank 2 knock sensor. I pulled the sensor today and get around .15 AC volts when tapping on the sensor and it returns to 0 when left alone. I do have long tube headers but do not see any issues like melted wiring or anything. Is there a way I can check voltage at the connector to see if I have an issue leading up to the sensor? Also, could the sensor still be faulty even though it seems to be testing correctly with the tap method?
__________________
2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, Street Slayer twin carbon, Tick stainless line and remote bleeder, GTO reservoir, 20" Verde Axis V99, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes
|
|
10-15-2018, 06:31 AM | #2 |
Drives: Camaro Join Date: Oct 2018
Location: Usa
Posts: 3
|
Hello, did you find it??
|
10-15-2018, 08:35 AM | #3 |
I guess the sensor was bad even though it seemed to bench test "good." I picked up a BWD replacement at OReilly to throw in while I had it out and the CEL has not returned yet with no pending codes on the scanner.
__________________
2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, Street Slayer twin carbon, Tick stainless line and remote bleeder, GTO reservoir, 20" Verde Axis V99, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes
|
|
|
|
|
|