09-22-2010, 11:58 PM | #1 |
Cajun Mariner
Drives: 10 Camaro SS/RS 15 Camaro Z/82 AGM Join Date: Mar 2010
Location: Real Cajun,Golden Meadow, LA.
Posts: 673
|
Throttle Body Coolant By Pass
On earlier models engine coolant was routed through the throttle body to prevent it from icing up in the colder northern climate, is this still in use on our cars or did GM do away with this? I tried a search but came up with nothing.
__________________
'10 Camaro 2SS/RS Red Jewel VVTLS3/A6
'15Camaro Z/28 Ashen Gray |
09-23-2010, 12:10 AM | #2 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,292
|
No change that I know of. They make a kit to re-route if you want.
|
09-23-2010, 02:05 AM | #3 |
Cajun Mariner
Drives: 10 Camaro SS/RS 15 Camaro Z/82 AGM Join Date: Mar 2010
Location: Real Cajun,Golden Meadow, LA.
Posts: 673
|
I did it on my truck was a piece of cake, thanks, that'll be my first mod.
__________________
'10 Camaro 2SS/RS Red Jewel VVTLS3/A6
'15Camaro Z/28 Ashen Gray |
09-23-2010, 05:04 AM | #4 |
220/221 whatever it takes
Drives: See sig.... Join Date: Jun 2010
Location: Lafayette In
Posts: 1,132
|
FYI, there aren't any coolant running through the TB on my car. I just installed a V-Max ported unit on it and there were no coolant hoses to remove or reroute.
__________________
Brent
2022 BMW X5 M50i 2022 Ram TRX 2021 GT500 CFHP 2016 Challenger Hellcat A8 1058whp/898wtq 1970 Chevelle SS396 4spd Last edited by McBeevee; 09-23-2010 at 11:24 AM. Reason: spelling |
09-23-2010, 10:50 AM | #5 |
Drives: 1994 1LE / 2006 Z51 Corvette Join Date: Jul 2009
Location: Plano, TX
Posts: 2,829
|
I believe GM did away with that starting in 2005 with the LS2. The 2004 LS1/LS6 should have been the last ones to have it. (some trucks might..)
|
09-23-2010, 11:04 AM | #6 |
Drives: 2000 Sebring Silver Z28 Join Date: Mar 2010
Location: McKinney, TX
Posts: 66
|
I agree with Anthony.
|
09-24-2010, 09:53 AM | #7 |
Cajun Mariner
Drives: 10 Camaro SS/RS 15 Camaro Z/82 AGM Join Date: Mar 2010
Location: Real Cajun,Golden Meadow, LA.
Posts: 673
|
Good deal thanks guys, then that mod is done.
__________________
'10 Camaro 2SS/RS Red Jewel VVTLS3/A6
'15Camaro Z/28 Ashen Gray |
09-24-2010, 11:25 AM | #8 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,292
|
There is a coolant hose sitting on top of my manifold. Not sure if your re-laying correct information. I have the heater hose re-location kit on my shopping list.
|
09-24-2010, 11:28 AM | #9 |
220/221 whatever it takes
Drives: See sig.... Join Date: Jun 2010
Location: Lafayette In
Posts: 1,132
|
What in the world do those two coolant lines laying on top of the intake manifold have to do with the throttle body
__________________
Brent
2022 BMW X5 M50i 2022 Ram TRX 2021 GT500 CFHP 2016 Challenger Hellcat A8 1058whp/898wtq 1970 Chevelle SS396 4spd |
09-24-2010, 11:45 AM | #10 |
Drives: 2000 Sebring Silver Z28 Join Date: Mar 2010
Location: McKinney, TX
Posts: 66
|
Heater Hoses are not TB Coolant lines from the F-body and early GTO days. That is no longer an issue.
|
09-24-2010, 11:54 AM | #11 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,292
|
I mis-understood the question. Never the less the heater hose is laying on top of the manifold Can't be a good thing. Would it not warm the air similar to it running through the TB.
|
09-24-2010, 12:58 PM | #12 |
220/221 whatever it takes
Drives: See sig.... Join Date: Jun 2010
Location: Lafayette In
Posts: 1,132
|
mercuryman, I do agree with you there. One would think they would warm the intake a bit. I personally don't think it'd be a huge increase but relocating them does look 100 times better.
__________________
Brent
2022 BMW X5 M50i 2022 Ram TRX 2021 GT500 CFHP 2016 Challenger Hellcat A8 1058whp/898wtq 1970 Chevelle SS396 4spd |
09-24-2010, 01:48 PM | #13 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,292
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Throttle Body Spacers - Are they Worth It? | FASST 1 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 13 | 05-13-2010 12:10 PM |
L99 Throttle body question | tsears | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 0 | 04-27-2010 11:46 PM |
Throttle body plate drilling... | getarz4u15ster | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 5 | 03-29-2010 11:13 PM |
95mm Wilson Throttle Body | Jim85IROC | V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment | 0 | 12-29-2009 09:17 AM |