04-12-2015, 10:12 AM | #1 |
abs,stabilatrack light on after gear change
Hi all well as the title states, I had the gear swap done over the weekend to a 3.91 in my 2011 a6 camaro.I have a sct-4 tuner and when I check for codes it doesn't show any , is there any other way to clear without going to a dealer.. thanks
|
|
04-12-2015, 10:15 AM | #2 |
Drives: '14 1LE, Z28.R Join Date: Apr 2014
Location: PA
Posts: 308
|
was the car re flashed for the 3.91 gears? If not it needs to be....
__________________
Far beyond stock....
|
04-12-2015, 10:21 AM | #3 |
I changed it with the tuner
|
|
04-13-2015, 10:09 AM | #4 |
Drives: 2019 Shock ZL1 Join Date: Jan 2007
Location: here
Posts: 800
|
Who did the swap? If a GM dealer did it, they would get new calibrations for the 3.91 gears and reflash any necessary modules.
__________________
From Super Chevy mag, April 2002: "Most of the weekend Settlemeire was meeting and greeting and quickly became known as simply "The Camaro Dude" (note, even his initials are SS)."
|
04-13-2015, 10:50 AM | #5 |
Drives: Black 2011 2SS/RS Join Date: May 2011
Location: S. Texas
Posts: 1,817
|
May have damaged a speed sensor while removing diff. There should be a code thrown for that tho.
|
04-13-2015, 11:37 AM | #6 |
I'm going to have it scanned this week to see what comes up . Dealership wouldn't do it here I had a local mechanic install them for me.
|
|
04-13-2015, 11:45 AM | #7 |
I had a local mechanic do it here ,because dealership wouldn't do it. I'm going to have it scanned this week, I've also changed the ratio with my sct-4 tuner.
|
|
04-13-2015, 06:54 PM | #8 |
Well after getting it scanned one code was right rear speed sensor. And after some more research it turns out those sensors will cause all kind of codes to pop up
|
|
04-14-2015, 11:37 AM | #9 |
Drives: Black 2011 2SS/RS Join Date: May 2011
Location: S. Texas
Posts: 1,817
|
They are not expensive and very easy to change out.
|
04-19-2015, 07:28 PM | #10 |
Yeah I've priced them already ,gonna change it out this week
|
|
|
|
|
|