5th gen ZL1/ 1LE square setup pic requests - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

rich2342 · 05-04-2018, 01:15 PM

Getting closer.. looking for that 23mm offset, 1 inch drop, and right wheels..

Thanks fella's keep em coming. I need inspiration!

rich2342 · 05-04-2018, 01:54 PM

Credit "Squiffy" whose picture I just jacked! I don't know his tire specs, but this may be close to my set up on CGM.

olblue75 · 05-04-2018, 03:46 PM

I got a set of front 1" drop springs need a set of rear BMR 1" drop springs.

rich2342 · 05-07-2018, 01:01 PM

I am thinking 1 inch only. Either hotchkis or BMR. Are both linear? I don't like progressive springs that aren't predictable aka Eibach pro's.

Probably springs, wheels then address sways later.

rich2342 · 02-20-2019, 05:27 AM

Bumping my old thread for pics as I still haven't done this and looking for pics and inspiration!

bkevind · 02-20-2019, 08:54 AM

Hmm, well my track setup is 19x11 square with 305's. Offsets are different front and rear to fit properly (minimize poking out), and it depends on the wheel specs. (No pics of my setup).

So here is another setup that is running square Apex 19x10.5 ET23, also with 305 tires (post #47)
https://www.camaro5.com/forums/showt...=515534&page=4

05-04-2018, 03:46 PM	#17
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,062	I got a set of front 1" drop springs need a set of rear BMR 1" drop springs. __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

02-20-2019, 08:54 AM	#20
bkevind Drives: 2013 2SS RS 1LE Join Date: Aug 2016 Location: Austin Posts: 555 View My Garage	Hmm, well my track setup is 19x11 square with 305's. Offsets are different front and rear to fit properly (minimize poking out), and it depends on the wheel specs. (No pics of my setup). So here is another setup that is running square Apex 19x10.5 ET23, also with 305 tires (post #47) https://www.camaro5.com/forums/showt...=515534&page=4 __________________ 468, Mishimoto rad + oil cooler, TSP LTH MCS 2WNR CTSV/ZL1 front calipers/rotors + G-Loc Forgestar CF-5 19x11

05-04-2018, 01:15 PM	#15
rich2342 Drives: 2010 CGM Camaro SS Join Date: Dec 2016 Location: MA Posts: 515	Getting closer.. looking for that 23mm offset, 1 inch drop, and right wheels.. Thanks fella's keep em coming. I need inspiration!

05-04-2018, 01:54 PM	#16
rich2342 Drives: 2010 CGM Camaro SS Join Date: Dec 2016 Location: MA Posts: 515	Credit "Squiffy" whose picture I just jacked! I don't know his tire specs, but this may be close to my set up on CGM.

05-07-2018, 01:01 PM	#18
rich2342 Drives: 2010 CGM Camaro SS Join Date: Dec 2016 Location: MA Posts: 515	I am thinking 1 inch only. Either hotchkis or BMR. Are both linear? I don't like progressive springs that aren't predictable aka Eibach pro's. Probably springs, wheels then address sways later.

02-20-2019, 05:27 AM	#19
rich2342 Drives: 2010 CGM Camaro SS Join Date: Dec 2016 Location: MA Posts: 515	Bumping my old thread for pics as I still haven't done this and looking for pics and inspiration!