08-05-2014, 06:38 PM | #1 |
Drives: '13 ZL1 725 rwhp / 700 ft lb tq Join Date: Jul 2009
Location: Andrews, Texas
Posts: 165
|
Just Mufflers and tips. ?'s
What mufflers are available to replace stock ones? I don't see the need to buy an entire cat back, or even axle back if staying 2.5"
I blew the steel wool out of my stock left one and am looking for a replacement. I'm not trying to be cheap. Just don't see the need to buy what is not broken. I have no cats. if that changes anyone's thoughts.
__________________
'13 Black Manual trans , Heads, Cam, Injectors, Ported Snout, Vmax throttle body, RotoFab, Headers, No Cats, 9.55 lower pulley, D3PE heat exchanger, - 725 rwhp/700 tq
|
08-05-2014, 06:50 PM | #2 |
Going for Plaid
Drives: 2011 C6 Join Date: Jan 2010
Location: Phoenix
Posts: 885
|
I would get a Corsa catback. They don't sell only an axleback. Your other choice is to get some mufflers welded in by a good exhaust shop. I like Magnaflow and Spintech if you want to go that route. It might drone with no cats. Corsa sounds amazing though and is totally worth the money. I had it on my C6. At least it's cheaper for a 5th Gen.
__________________
2014 ZL1, manual trans, carbon hood insert, Rotofab, Pacesetter 1 7/8" headers, 1" drop BMR springs, stock pulleys, 91 octane tune, 545rwhp & 515rwtq
Serviced and modded by Cordes Performance. 2011 C6, 750rwhp, forged LS3, ported LSA heads, Vortech Ti-trim, 227/243 115+4 Lunati cam, ported LS3 intake, Alky Control methanol, Pfadt sways/shocks/trans mounts, Pfadt tri-y headers(Sold 6/28/14) |
08-05-2014, 07:44 PM | #3 |
Drives: '13 ZL1 725 rwhp / 700 ft lb tq Join Date: Jul 2009
Location: Andrews, Texas
Posts: 165
|
I had Corsa sport on my Hennessey SS. Loved it. Wanting something a little deeper in tone.
__________________
'13 Black Manual trans , Heads, Cam, Injectors, Ported Snout, Vmax throttle body, RotoFab, Headers, No Cats, 9.55 lower pulley, D3PE heat exchanger, - 725 rwhp/700 tq
|
08-05-2014, 08:02 PM | #4 |
Speed Freak
Drives: 2013 ZL1 Camaro, 2016 Camaro SS Join Date: Jun 2013
Location: Ardmore, OK
Posts: 2,637
|
Do you want to take a chance on a used stock ZL1 set...only 10,000 miles to the grocery store and back on Sunday....
Joking aside I have run mine hard but never saw wool coming out. Maybe I burned it out.... I'm posting the entire stock exhaust for sale and if I get no takers I could sell the mufflers and tips.
__________________
2016 SS -AGP twin Borg Warner 7163 EFR's, LT4 mechanical pump, LT4 injectors, Walbro 255 low side, Castrol SRF. 734whp/759 tq
2013 ZL1 -ADM - 427 LSX 6 bolt, O-ringed block built by LME. Twin PT6466 turbos. RPM custom manual trans, RPS Quad carbon clutch, 9" Hendrix rear diff & axles. ADM/squash fuel system, Ron Davis radiator, Spal fans, AGP air to air, turbo plumbing. LPE oil cooler, rear bushing upgrade, roll bar...etc. rwhp 1400+... 212.5mph, best Texas mile to date. |
08-05-2014, 08:30 PM | #5 |
Ragtop Rocket!!!
Drives: Black on Black Convertible Join Date: Mar 2013
Location: San Antonio Texas
Posts: 809
|
I wouldn't worry about it at all if I were you unless you just wanted different sound. I blew mine out a long time ago and just kept rolling. Corsa sounds best in my opinion.
__________________
ADM built 2013 Triple Black ZL-1 Convertible M6
ADM custom cam, LPE stage 2 heads with dual valve springs, LS-3 ported throttle body, LPE 2 piece pulley, LPE overdrive balancer, 10% overdrive pulley, ported supercharger inlet, ADM race intake system, stainless works 1-7/8 headers, Injector Dynamics injectors, ADM heat exchanger, ADM dual fuel pump system, ADM exhaust switch, ADM 3 tunes tuning package. 744rwhp 727rwtq |
08-05-2014, 08:37 PM | #6 |
Drives: '13 ZL1 725 rwhp / 700 ft lb tq Join Date: Jul 2009
Location: Andrews, Texas
Posts: 165
|
I need to run down to Odessa and meet up with you. I want to hear another 700+ car.
__________________
'13 Black Manual trans , Heads, Cam, Injectors, Ported Snout, Vmax throttle body, RotoFab, Headers, No Cats, 9.55 lower pulley, D3PE heat exchanger, - 725 rwhp/700 tq
|
08-05-2014, 08:42 PM | #7 | |
Drives: '13 ZL1 725 rwhp / 700 ft lb tq Join Date: Jul 2009
Location: Andrews, Texas
Posts: 165
|
Quote:
Pulled it out about a foot and a half long.
__________________
'13 Black Manual trans , Heads, Cam, Injectors, Ported Snout, Vmax throttle body, RotoFab, Headers, No Cats, 9.55 lower pulley, D3PE heat exchanger, - 725 rwhp/700 tq
|
|
08-06-2014, 02:27 PM | #8 |
Drives: RED@2SS Join Date: Aug 2010
Location: UAE
Posts: 1,372
|
If u'r looking for deep tone go for magnaflow
__________________
|
08-06-2014, 03:39 PM | #9 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
I'd recommend a couple Magnaflow mufflers. They're nice and deep, and will take care of some of that rasp from having no cats.
Feel free to give me a call or shoot me a PM and I'll be happy to help you out and answer any questions. Best regards, Tyler 888-308-6007 |
08-06-2014, 04:35 PM | #10 | |
Drives: 2013 ZL1 Join Date: Oct 2011
Location: tangent or
Posts: 2,984
|
Quote:
if cost in your concern that is by far the cheapest solution. other than that listen to sound clips. exhaust sound is like taste in music no two people will have the same taste. I hate magnaflow with a passion for example but some people love them. I like borla some people hate them. for this car the sound clips of the stailess works champber setup sound great to me. that is what I will try if I ever swap.
__________________
shopping for 2017+1le or zl1
2009 CTS-V -sold 2015 Hellcat-sold 2013 ZL1 -sold 2007 Z06- sold 2014 Chrysler 300 2011 Duramax 8" lift, deleted tuned |
|
08-06-2014, 05:46 PM | #11 |
Ragtop Rocket!!!
Drives: Black on Black Convertible Join Date: Mar 2013
Location: San Antonio Texas
Posts: 809
|
Just let me know when your coming? I live on the north side of town Hwy 385 and 87th. We can go down to Corkys and I'll buy a round or two.
__________________
ADM built 2013 Triple Black ZL-1 Convertible M6
ADM custom cam, LPE stage 2 heads with dual valve springs, LS-3 ported throttle body, LPE 2 piece pulley, LPE overdrive balancer, 10% overdrive pulley, ported supercharger inlet, ADM race intake system, stainless works 1-7/8 headers, Injector Dynamics injectors, ADM heat exchanger, ADM dual fuel pump system, ADM exhaust switch, ADM 3 tunes tuning package. 744rwhp 727rwtq |
|
|
Thread Tools | |
|
|