2017 Camaro 1LE Whipple

damian559 · 10-09-2018, 12:00 AM

I'm looking to buy a Whipple and supporting mods for my 2017 Camaro 1LE next month. I'm just trying to piece everything together right now so I know what to buy. I think I have everything down but just want to confirm; Whipple, headers, LT4 injectors and the ZL1 high pressure fuel pump.

Is there one dealer who would have everything I need?

Thank you!

Jhunsberger · 10-09-2018, 06:08 AM

I got most of my stuff thru WeaponX and Jannetty.

You will also want LS crank seal GM part # 12585673, and sparks plugs, I used NKG-6509, 3 bottles of water wetter. It would be good to also install a gauge to monitor IAT's and boost, i used a P3 gauge with analog boost and am happy with it.

Good luck with your build!

laynlo15 · 10-09-2018, 06:41 AM

Not going to consider the Maggie?

Goldfish · 10-09-2018, 07:55 AM

Quote:

Originally Posted by Jhunsberger

3 bottles of water wetter.

Good luck with your build!

Just my two cents, I wouldn't use water wetter. Use the correct GM coolant instead.

Juiced1 · 10-09-2018, 07:56 AM

Quote:

Originally Posted by damian559

I'm looking to buy a Whipple and supporting mods for my 2017 Camaro 1LE next month. I'm just trying to piece everything together right now so I know what to buy. I think I have everything down but just want to confirm; Whipple, headers, LT4 injectors and the ZL1 high pressure fuel pump.

Is there one dealer who would have everything I need?

Thank you!

Damian559 we are your one stop shop for supercharger performance. We are an authorized Whipple dealer and we also have the LT4 fuel pump and injectors for sale as well. Long Tubes? We have tons of options and very aggressive pricing. Also, use code CAMARO6 and get your forum discount. You can save on our already low prices. If you're local to us we also handle installs and tuning.

Jhunsberger · 10-09-2018, 08:32 AM

Quote:

Originally Posted by Goldfish

Just my two cents, I wouldn't use water wetter. Use the correct GM coolant instead.

Its added to the GM approved coolant. Also whipple recommends using it right in their instructions.

JANNETTYRACING · 10-09-2018, 09:03 AM

Quote:

Originally Posted by damian559

I'm looking to buy a Whipple and supporting mods for my 2017 Camaro 1LE next month. I'm just trying to piece everything together right now so I know what to buy. I think I have everything down but just want to confirm; Whipple, headers, LT4 injectors and the ZL1 high pressure fuel pump.

Is there one dealer who would have everything I need?

Thank you!

We can certainly provide a true plug and play power package with custom tuning included 203-753-7223

Ted.

JDP Sales · 10-09-2018, 09:36 AM

Quote:

Originally Posted by damian559

I'm looking to buy a Whipple and supporting mods for my 2017 Camaro 1LE next month. I'm just trying to piece everything together right now so I know what to buy. I think I have everything down but just want to confirm; Whipple, headers, LT4 injectors and the ZL1 high pressure fuel pump.

Is there one dealer who would have everything I need?

Thank you!

We are a heck of a lot closer to you and can get you a great price on everything you need

. Feel free to call or email us at any time.

Cheers,

Kayla L.
801.545.4215

Drsagacity · 10-09-2018, 03:58 PM

Quote:

Originally Posted by damian559

I'm looking to buy a Whipple and supporting mods for my 2017 Camaro 1LE next month. I'm just trying to piece everything together right now so I know what to buy. I think I have everything down but just want to confirm; Whipple, headers, LT4 injectors and the ZL1 high pressure fuel pump.

Is there one dealer who would have everything I need?

Thank you!

Depending on how much boost you decide to run, you might want to add a voltage booster or an auxiliary fuel system because as you up the boost your in-tank pump will start to drop pressure.

JeromeS13 · 10-10-2018, 01:14 AM

Quote:

Originally Posted by Drsagacity

Depending on how much boost you decide to run, you might want to add a voltage booster or an auxiliary fuel system because as you up the boost your in-tank pump will start to drop pressure.

The 1LE already has the ZL1 in-tank pump.

Drsagacity · 10-10-2018, 05:54 AM

Quote:

Originally Posted by JeromeS13

The 1LE already has the ZL1 in-tank pump.

Yes. I know. The ZL1 in tank pump gets overrun and you will either want to add a voltage booster or an auxiliary fuel system. Probably depends on your HP goals.

To add more color, with e85 we saw the zl1 in-tank pump dropping pressure at 8psi. Once we installed the BAP, the low side stays rock solid with e85 and 12 psi (760whp). In fact, I expect that we can run up to about 850whp with the zl1+BAP pretty easily (will be about 3-4% higher on manual).

With e85 (really e70), we are pretty close to the injector pulse width limitation on 12psi (no alky or race fuel). I suspect with race fuel we could easily run to 830-850whp. As we start upping the boost, however, we could start seeing heat issues and need to add alky...I am not quite there yet so will defer to others who know for sure. I would recommend calling Ted and just talking through the options. He has taken the time with me to make sure I had everything and even special calls when I was on the dyno to tweak in real time.

Goldfish · 10-10-2018, 06:55 AM

Quote:

Originally Posted by Jhunsberger

Its added to the GM approved coolant. Also whipple recommends using it right in their instructions.

Once again this just my two cents and it's worth exactly what you've paid me for this advice, but water wetter is basically like snake oil, especially if you're going to run coolant instead of straight water. The ASTM corrosion standards that they meet are also significantly less than what would typically be required of engine coolant. If Whipple calls it out in their instructions, that certainly is a head scratcher.

Joe's_cool_1le · 10-10-2018, 08:47 AM

Yup they call for it.

JeromeS13 · 10-10-2018, 08:54 AM

Quote:

Originally Posted by Joe's_cool_1le

Yup they call for it.

Taking suggestions from instructions that doesn't use spellcheck?

Joking.

10-09-2018, 12:00 AM	#1
damian559 Drives: 2015 1SS, 1LE, Recaro, NPP Join Date: Apr 2014 Location: Fresno, CA Posts: 927	2017 Camaro 1LE Whipple I'm looking to buy a Whipple and supporting mods for my 2017 Camaro 1LE next month. I'm just trying to piece everything together right now so I know what to buy. I think I have everything down but just want to confirm; Whipple, headers, LT4 injectors and the ZL1 high pressure fuel pump. Is there one dealer who would have everything I need? Thank you! __________________ 2015 Summit White 1SS, 1LE, Recaros, NPP 498 RWHP 447 RWTQ (Motor) 647 RWHP 723 RWTQ (150 Shot) 12.1 @ 117 (Motor) 11.7 @ 129 (Nitrous) Nitrous Outlet Single Nozzle Kit \| Stand Alone Fuel Cell w/ C16 \| Custom Grind Cam \| Stainless Power 1 7/8 LT Headers \| CAI Intake \| ATI Super Damper \| BMR Trailing Arms & Toe Links \| Prothane Polyurethane Sub-frame Bushings \| JDP Upper Control Arm Bushings \| MT Drag Radials \| Tuned by SS Motorsports Youtube Channel: Click Here

10-09-2018, 06:08 AM	#2
Jhunsberger Drives: 2017 Camaro 1SS M6 (SOLD) Join Date: Oct 2016 Location: 19518 Posts: 402	I got most of my stuff thru WeaponX and Jannetty. You will also want LS crank seal GM part # 12585673, and sparks plugs, I used NKG-6509, 3 bottles of water wetter. It would be good to also install a gauge to monitor IAT's and boost, i used a P3 gauge with analog boost and am happy with it. Good luck with your build! __________________ 2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11 Stock: 416hp/427tq, 12.21 @ 116.80 Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft. Tuned by EFX Tuning 688hp/632tq Best 1/4 to date: 10.705 @ 131.92

10-09-2018, 06:41 AM	#3
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Not going to consider the Maggie? __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

10-10-2018, 08:47 AM	#13
Joe's_cool_1le Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016 Location: Virginia Beach Posts: 1,319	Yup they call for it. Attached Images __________________ 2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump

User Name		Remember Me?
Password