03-09-2017, 05:44 AM | #1 |
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,045
|
My Forced Induction build has started
Pulled the trigger on a Vortech package from Ted Jannetty for my 2010 IOM Camaro.
OLD Plan: It was a bridge too far getting the Whipple package to ship through USPS to APO address due to the weight. NEW PLAN: Vortech YSI - sorry Whipple fans but I was going back and forth between the YSi and the Whipple before buying... V-7 YSI with billet wheel - 3.60 and 7.8 pulleys - NOW with a 3.30 Pulley from Griptech F Photobucket for third party posting BS... pics now from imgur.com ID 1050x's HP Tuners JRE catch can and modified breather set up. 3 bar MAP DSX Aux Pump Already have waiting to go on: Pat G/TSP 224/240/ .615/.615 116 +4 cam Monster twin disk clutch LS7 Lifters LS9 Head gaskets new BTR .660 platinum's Bo White ported TB ZL1 Pump and FPCM I will be hand porting stock LSA 863 heads - nothing fancy just so they flow at least as good as LS3 heads. New LS 3 hollow stem intake and Manley severe duty exh valves The SS is already Cam'd (Vengeance racing stage II NA), LT, cat back car with all after market suspension and ZL1 front brake upgrade. Reusing supporting mods: Melling HV oil pump - had to replace... LS2 timing damper C5R timing chain ARP head bolts and cam bolts Hardened 7.4 comp pushrods - but will measure when assembling to be sure...trend pushrods if diff length be needed...
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi Last edited by racesloth; 11-22-2020 at 07:46 PM. |
03-09-2017, 09:45 AM | #2 |
Drives: 2010 Camaro SS Join Date: Dec 2006
Location: MN
Posts: 1,177
|
You've got a damn near perfect build going there in my book. Great choice on just about all the parts. Look forward to your results! Have fun with the build.
Now you need to think about getting yourself HP Tuners and learning to tune yourself. Ton of fun if you have the time and patience to learn it. |
03-09-2017, 12:33 PM | #3 |
|
Yep, impatiently awaiting pics.......
|
03-10-2017, 03:05 AM | #4 |
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,045
|
Getting started this weekend - prep at least. I have to repair the floor in my garage that was built circa 1680... It is fine to park on but I don't want to be on back under the car on it like it is. Gonna be a bit of time on the parts as they just were ordered.
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
03-10-2017, 06:22 AM | #5 |
Good luck with the build, it's going to be fun once it's done
__________________
2010 Camaro SS Whipple SC, CAI Inc Intake, TSP 1 7/8" LT headers no cats, 3" magnaflow exhaust, HPT, RX Catch Can, LSR Toe Rods, LSR Trailing Arms, ALKY Control Meth, McLeod RXT Twin Disc, ZL1 fuel pump, 3.73 ZL1 Differential Kit, BTR PDS Stage 2 Cam, Tuned by SLOWHAWK Performance Bridgewater MA
|
|
03-10-2017, 07:13 AM | #6 |
Emerald Coast Camaros
Drives: 2010 RS/SS Rally Yellow & 68 SS Join Date: Dec 2012
Location: Woodville,FL.
Posts: 1,814
|
It will be fun. And good luck to you.
__________________
Best @ 586/525 =10.41 @ 133
AS OF 12/13/14>633 RWHP =10.22@135 AS OF 1/31/15 @ 633 RWHP=10.16@135 AS OF 1/29/16 @ 633 RWHP=10.10@136 TOPED 700 PASSES AFTER F.I. AND STILL ON THE ORIGIANAL STOCK AXLE & DIFF |
03-13-2017, 06:49 AM | #7 |
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,045
|
Manley exhaust valves arrived. They are nice pieces. Porting burrs and sanding rolls enroute.
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
03-13-2017, 09:01 AM | #8 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,277
|
Quote:
Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
03-13-2017, 11:07 AM | #9 |
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,045
|
Thanks Ted....
New Intake valves and Z28 motor mounts arrived today..... LS hollow stems weigh 86gr and Manley severe duty exhausts weigh in at 92gr Time to start saving for the 416 stroker upgrade next year.
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi Last edited by racesloth; 03-13-2017 at 02:45 PM. |
03-16-2017, 07:56 AM | #10 |
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,045
|
My Metabo GE700 arrived along with sanding roll and mandrel kit. Waiting on non-ferrous burrs, then let the LSA head porting begin....
Update: burrs are in 3/8" cylinder ball and 3/8" cone.... Let the aluminum fly...
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi Last edited by racesloth; 03-17-2017 at 07:37 AM. |
03-17-2017, 06:17 AM | #11 |
Drives: 2017 Jaguar F Type R Tuned 498awhp Join Date: Apr 2013
Location: Canada
Posts: 871
|
Sounds like you are off to a great start! You can't go wrong with JRE. Enjoy!
__________________
JRE cammed w.full bolt ons 444rwhp/422rwtq SOLD
2017 Jaguar F Type R ''Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.'' - F. Bueller |
03-17-2017, 08:04 AM | #12 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,277
|
Sold? what is in the garage now?
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
03-25-2017, 06:38 AM | #13 |
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,045
|
YSi is ordered!
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
03-25-2017, 12:57 PM | #14 |
Drives: 99 Camaro; 2010 Camaro 2SS/RS Join Date: Nov 2009
Location: louisiana
Posts: 1,967
|
__________________
2018 Camaro SS A8 Edelbrock 2650 FBO 93 octane 9.54@144 Pump E 9.59@152
2010 Camaro Stock bottom end with 46,000+miles JRE remote tuning Whipple A6 and Drive it to and from the track 9.46@146 |
|
|
Tags |
cam, id850, twin disc, whipple |
|
|