DIY : M6 shift knob removal on a 2013 - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

chef-beavis · 02-22-2014, 01:05 PM

You're welcome.

TehWingman · 09-05-2014, 03:30 PM

Does anyone know if this also applies to a 2014 V6 manual shift knob? I have been pulling and twisting and cannot get that chrome ring to budge. I really don't want to break stuff on a brand new car.

chef-beavis · 09-05-2014, 04:22 PM

No idea. Should be easy to try.

Dupree878 · 10-21-2014, 11:08 AM

Thanks so much for this. Now to find a brushed stainless cueball sized knob...

2014CamaroSSRS · 01-31-2015, 12:53 PM

Thank you for this write-up! Saved me some aggravation haha! And I was able to remove it without breaking the tabs... and get my new paint-matched SS Red Rock Metallic shift knob installed... whew!!

chef-beavis · 01-31-2015, 03:43 PM

You're welcome. What brand is that knob? What shifters does it fit? What colors do they offer? It looks really nice.

2014CamaroSSRS · 01-31-2015, 03:49 PM

I got it from here:

http://camarocollection.com/accessor.../interior.html

they have them for automatic and manual trannies...

it does NOT fit factory hurst short-throw shifters on the 2010-2012's...

they DO have one for 2013-2014, and it DOES fit the GM performance short-throw shifter - that's what I have...

for the manual tranny, they have one for 2010-2012's.. and it's a different model for 2013-2014, due to the way it attaches...

they have them in all (or most) of the factory colors...

chef-beavis · 01-31-2015, 04:48 PM

Thanks. Sounds like I keep what I have!

bmcquill · 05-01-2018, 01:48 PM

Quote:

Originally Posted by TehWingman

Does anyone know if this also applies to a 2014 V6 manual shift knob? I have been pulling and twisting and cannot get that chrome ring to budge. I really don't want to break stuff on a brand new car.

Were you able to get the ring to twist off eventually? I have the same model and will be starting this project soon. Thank you

ChibiBlackSheep · 05-01-2018, 02:44 PM

Quote:

Originally Posted by bmcquill

Were you able to get the ring to twist off eventually? I have the same model and will be starting this project soon. Thank you

Treat it like a medicine bottle with a safety cap. While sitting in the driver's seat, pull upwards, and twist left, this let's it do a quarter turn, then you just lower it down the shaft to get access to the screw.

Super easy.

bmcquill · 06-24-2018, 05:30 PM

Quote:

Originally Posted by ChibiBlackSheep

Treat it like a medicine bottle with a safety cap. While sitting in the driver's seat, pull upwards, and twist left, this let's it do a quarter turn, then you just lower it down the shaft to get access to the screw.

Super easy.

Thank you, will be installing this Thursday

jokrz187 · 07-06-2018, 07:06 AM

can't wait to do this

10-21-2014, 11:08 AM	#18
Dupree878 Drives: '13 Dusk Edition 2SS/RS M6 Join Date: Nov 2012 Location: Tuscaloosa, AL Posts: 600	Thanks so much for this. Now to find a brushed stainless cueball sized knob... __________________

01-31-2015, 12:53 PM	#19
2014CamaroSSRS Account Suspended Drives: 2014 Camaro SS - 2SS, RS Join Date: Jan 2014 Location: CT Posts: 90	Thank you for this write-up! Saved me some aggravation haha! And I was able to remove it without breaking the tabs... and get my new paint-matched SS Red Rock Metallic shift knob installed... whew!! Attached Images

07-06-2018, 07:06 AM	#26
jokrz187 Drives: 2015 1SS Join Date: Jun 2017 Location: Woodbridge, VA Posts: 145 View My Garage	can't wait to do this __________________ MODS: VARARAM CAI, Painted Calipers, Catch Can, 1 LE front/rear sway bars, engine cover/fuse box custom painted, strut bar.....

02-22-2014, 01:05 PM	#15
chef-beavis Drives: IOM 2013 2SS/RS, Greenie, 06 FXSTBi Join Date: Apr 2009 Location: Turd Town, WI Posts: 1,294	You're welcome.

09-05-2014, 03:30 PM	#16
TehWingman Camaros love stripes. Drives: 2014 Camaro 1LS Join Date: Aug 2014 Location: Hubbard, Ohio Posts: 67 View My Garage	Does anyone know if this also applies to a 2014 V6 manual shift knob? I have been pulling and twisting and cannot get that chrome ring to budge. I really don't want to break stuff on a brand new car.

09-05-2014, 04:22 PM	#17
chef-beavis Drives: IOM 2013 2SS/RS, Greenie, 06 FXSTBi Join Date: Apr 2009 Location: Turd Town, WI Posts: 1,294	No idea. Should be easy to try.

01-31-2015, 03:43 PM	#20
chef-beavis Drives: IOM 2013 2SS/RS, Greenie, 06 FXSTBi Join Date: Apr 2009 Location: Turd Town, WI Posts: 1,294	You're welcome. What brand is that knob? What shifters does it fit? What colors do they offer? It looks really nice.

01-31-2015, 03:49 PM	#21
2014CamaroSSRS Account Suspended Drives: 2014 Camaro SS - 2SS, RS Join Date: Jan 2014 Location: CT Posts: 90	I got it from here: http://camarocollection.com/accessor.../interior.html they have them for automatic and manual trannies... it does NOT fit factory hurst short-throw shifters on the 2010-2012's... they DO have one for 2013-2014, and it DOES fit the GM performance short-throw shifter - that's what I have... for the manual tranny, they have one for 2010-2012's.. and it's a different model for 2013-2014, due to the way it attaches... they have them in all (or most) of the factory colors...

01-31-2015, 04:48 PM	#22
chef-beavis Drives: IOM 2013 2SS/RS, Greenie, 06 FXSTBi Join Date: Apr 2009 Location: Turd Town, WI Posts: 1,294	Thanks. Sounds like I keep what I have!