Borla Atak or Flowmaster Outlaw - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Camaro10ss1 · 11-03-2014, 04:49 PM

Quote:

Originally Posted by keving2873

Thanks. Video's were taken with an iPhone so it still isn't truly what it sounds like in person, but pretty close I think. You don't get the feeling in your chest like you would in person.

Lol. I know exactly what you mean.

john2012camaroSS · 11-04-2014, 06:36 AM

I have the borla s type setup. If I had to do it again id stay away from borla. At about 2500 rpms you get a very noticeable drone. The supposed fix is a J pipe sold by solo which I had installed for about another 250 including install. Look into solo they sell a nice ajustable setup.

keving2873 · 11-04-2014, 11:21 AM

Quote:

Originally Posted by john2012camaroSS

I have the borla s type setup. If I had to do it again id stay away from borla. At about 2500 rpms you get a very noticeable drone. The supposed fix is a J pipe sold by solo which I had installed for about another 250 including install. Look into solo they sell a nice ajustable setup.

Personally I don't remember a drone in that range or really any range for that matter. That goes for when it was just exhaust, then adding headers, then adding a cam. Then again I drive with my windows down as long as it is not pouring rain so maybe that makes it so I don't hear it? I am also used to drone from a straight piped, Honda Accord V6 with a turbo, which had terrible drone, but fun enough to be worth it. Maybe that's why I just don't seem to notice any drone in the Camaro.

SSGUNNER · 11-04-2014, 10:22 PM

Outlaws FTW!
Wish i had gone with these when i had my SS. Now im trying to figure out a way of getting the outlaws on my hemi.

satxrider · 11-06-2014, 11:10 PM

Quote:

Originally Posted by Camaro10ss1

Also kinda sucks the atak is a 2.5" system and I already have 3" piping on the car.

I haven't heard the sound of the Borla 3" system but they do have one available...,

http://www.borla.com/products/camaro...t__140348.html

Camaro10ss1 · 11-07-2014, 07:52 AM

Quote:

Originally Posted by SSGUNNER

Outlaws FTW!
Wish i had gone with these when i had my SS. Now im trying to figure out a way of getting the outlaws on my hemi.

Did you feel the car was pretty loud? Deep? Drone? Just trying to get everyone's opinion that has personally had the exhaust.

Quote:

Originally Posted by satxrider

I haven't heard the sound of the Borla 3" system but they do have one available...,

http://www.borla.com/products/camaro...t__140348.html

I saw that as well, but from what my understanding is the atak is supposes to be their loudest most aggressive sounding system.

Camaro10ss1 · 11-07-2014, 06:55 PM

So I decided to go ahead and chop off my 40s and go with straight pipe no resonators or cats. I have to say I couldn't be happier the car sounds amazing!

satxrider · 11-07-2014, 09:59 PM

I cut my resonators and mufflers today as well. Sounds great!

Camaro10ss1 · 11-08-2014, 12:49 AM

Quote:

Originally Posted by satxrider

I cut my resonators and mufflers today as well. Sounds great!

11-04-2014, 10:22 PM	#18
SSGUNNER Chu no guat a hasa is? Drives: 14 Jeep G Cherokee Overland HEMI Join Date: Jun 2011 Location: Some where in So Cal Posts: 4,273	Outlaws FTW! Wish i had gone with these when i had my SS. Now im trying to figure out a way of getting the outlaws on my hemi. __________________ 11 2SS/RSL99No Longer Stock (Sold) 6/19/14:AAC Plasma DRL's \| Plug n play harness \| Elite CC \| Tint: 35% & 5% \| LED Dome light \| Show-N-Go Plate Holder \| Flowmaster AT \| C.A.I. Intake \| VMAX CNC Spiral Ported TB \| Husky Splash Guards

11-07-2014, 09:59 PM	#22
satxrider Bad 45th Drives: 2012 45th Anniversay Edition SS Join Date: Apr 2014 Location: San Antonio Posts: 548	I cut my resonators and mufflers today as well. Sounds great! __________________ - Carl 2012 45th Anniversary SS - LS3 Magnuson TVS 2300 Supercharger / Alky Meth Injection / Lingenfelter GT12 Cam / Kooks LT Headers, 3 inch exhaust & QTP electric cut outs / Monster LT1-S Twin Disc Clutch / MGW flat blade short throw shifter / Haltech CAI / VMax Throttle Body / DSS Stage 3 axles/ BMR Trailing Arms, Toe Rods, Suspension Bushing and 1" lowering springs / Taylor 8MM Plug Wires / Tuned by Henderson Performance Technologies / EBC dimpled and sloted rotors / G2 Painted Calipers / GM Tower Strut Brace / ZL1 Factory Rep Wheels

11-04-2014, 06:36 AM	#16
john2012camaroSS Drives: 2012 Black SS Join Date: Apr 2013 Location: New York Posts: 220 View My Garage	I have the borla s type setup. If I had to do it again id stay away from borla. At about 2500 rpms you get a very noticeable drone. The supposed fix is a J pipe sold by solo which I had installed for about another 250 including install. Look into solo they sell a nice ajustable setup.

11-07-2014, 06:55 PM	#21
Camaro10ss1 Drives: 2010 Camaro SS ls3 Join Date: Oct 2014 Location: Houston Posts: 267	So I decided to go ahead and chop off my 40s and go with straight pipe no resonators or cats. I have to say I couldn't be happier the car sounds amazing!