08-30-2022, 12:11 PM | #1 |
Drives: Camaro 2SS Join Date: Jun 2022
Location: USA
Posts: 27
|
Does anyone here run a square 11" set up with OE ZL1 or 1LE wheels?
I know it's been done with OE 10" all around but I'm curious to see if it's been done with 11". I'm thinking 305 all the way around. Easier to rotate the tires as needed too. Anyone have pics of this set up?
|
08-31-2022, 06:26 AM | #2 |
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,735
|
I run 305s on the 10" ZL 1 wheels. I have not tried it, but the 11s don't have the correct offset to run on the front. I get a little rubbing on the bottom of the DSSV strut with the 305 because it has been modified to drop the front an inch. I'll probably go with 295s or 285s the next round.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
08-31-2022, 06:22 PM | #3 | |
Drives: Camaro 2SS Join Date: Jun 2022
Location: USA
Posts: 27
|
Quote:
Would you mind posting a pic of your 10" ZL1 wheelson the rear from a few different side angles? I've heard it sits more flush with the fender compared to the 11" so it may look quite aggressive. |
|
09-01-2022, 08:39 AM | #4 |
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,735
|
I run 325s on the rears. I was just giving you some info on running 305s up front.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
09-01-2022, 08:35 PM | #5 |
I am running 275/40 on 20x9's up front...but here are a few angles of 305/35's on a 20x10 in the rear. I'm also lowered about 1.25"
|
|
|
|
|
|