08-28-2017, 01:45 PM | #1 |
Drives: 2009 SRX Join Date: Aug 2017
Location: Brevard County, FL
Posts: 4
|
This Isn't Exactly a Camaro Issue, But....
My wife has the Cadillac SRX with the same 3.6 as the base Camaro. The coils are held down by a 10mm bolt that goes in a metal collar that rests in the composite head.
One of these collars no longer rests, and just spins when I try to tighten the bolt. Is there an epoxy (or any other method) that works to hold these collars in place after they've come loose? Thanks in advance. |
Thread Tools | |
|
|