Solid cradle bushings half way in - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

FasNuf · 06-20-2021, 11:04 PM

Quote:

Originally Posted by Pkeen

I used a rotary hand grinder with a flapper wheel to clean up the old residue in the cradle , worked great!

This is what I would do. You can get these flapper wheels at welding supply stores for sure.

Lnch Mny · 06-21-2021, 08:54 PM

Bushings are back out! Thanks guys!!

1JEWLDSSRS · 06-22-2021, 01:33 PM

Very cool!!! Now clean those holes out really good, cool down the bushings and lube them up well with oil, not grease as that would be too thick before you try to install them again and you shouldn't have any issues.. GL

06-22-2021, 01:33 PM	#17
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,435	Very cool!!! Now clean those holes out really good, cool down the bushings and lube them up well with oil, not grease as that would be too thick before you try to install them again and you shouldn't have any issues.. GL __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

06-21-2021, 08:54 PM	#16
Lnch Mny Drives: IBM Camaro Join Date: Jul 2009 Location: Decatur, IL Posts: 266 View My Garage	Bushings are back out! Thanks guys!!