New Billy Boat 2010 Camaro Exhaust - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ragin Racin · 10-16-2009, 09:55 AM

Ragin Racin is happy to bring the new 2010 B&B Exhaust system to you. We will have pictures up this week. Also our first sets are arriving this week. The B&B System will have 2 different setups, a Sport and a Classic version. They will feature 4.5 inch tips. They also have a version for the square back exhaust system.

The normal retail price on the B&B Systems will be $1481.00 and we will offer them at an introductory price of $1258.85

Please give us a call to place your orders. The first 5 orders will recieve free shipping.

**These sets are in production now and are built when ordered. Allow 1-3 weeks before they ship out.**

Shawn

The Press release
Here is the B&B Press release.

New Product Release
2010 CAMARO SS/V8 & V6
Billy Boat Performance Exhaust has been setting the pace for high performance stainless steel exhaust systems for 20 years now. B&B applies its deep racing heritage to craft one of the finest exhaust systems available. Continuing in that tradition B&B has recently introduced a line of exhaust systems for the new 2010 Chevy Camaro.
CNC mandrel bent T304 stainless steel tubing is used throughout the entire system for a precise fit. The V8 is a full 3” system and is available in a classic and sport version while the V6 is a 2.5” system and is only available in the classic version. Both the V8 and V6 systems use a hand fabricated x-pipe that helps balance the exhaust pulses for better scavenging and a cleaner exhaust note.
B&B has designed a muffler specifically for the Camaro using their proprietary Purge Resonance Technology or PRT. Hand fabricated out of T304 stainless steel the muffler offers increased exhaust flow and emits a nice deep muscle car bark at idle, acceleration and cruising speeds while all but eliminating the unwanted in-cabin, low frequency resonation. Performance increases of 10hp and 11ft/lbs on the V8 and 5hp and 5ft/lbs on the V6 were seen on their in house chassis dyno.
For aesthetics Billy Boat Performance Exhaust incorporated their popular round double wall tips with a 4.250” on the V8 and a 4” on the V6 to give the Camaro a mean yet distinguishing look missing from the factory. The mufflers and tips are fully polished to a mirror like finish and as with all Billy Boat Performance Exhaust systems it is backed with a limited LIFETIME warranty.

1meanss · 10-16-2009, 12:42 PM

sound clips?

Ragin Racin · 10-16-2009, 12:55 PM

I will have some up in the next week or so. I have some of the first production sets coming in this week.

kelleyperformance · 10-16-2009, 12:56 PM

finally!

B&B FTW- these systems are like art work, and sound just as good as they look

Styffydawg · 10-16-2009, 01:50 PM

I can't wait to hear the sound clips.

BlackM6RS/SS · 10-16-2009, 09:48 PM

Nice, B&B is known for a nice tone for sure! Sound clips next

Jferrell88 · 10-18-2009, 12:43 AM

can't wait to hear this

iBK3000 · 10-18-2009, 11:32 PM

I thought 2.5" was optimal tube diameter unless you turbo/supercharge?

How would this system work with some ST Headers.

*Mindz* · 10-19-2009, 12:56 AM

My stepfather loves his B&B exhaust on his porsche. I'm interested in hearing this as well...

BOBSS · 10-19-2009, 09:10 AM

Do you have a solution for those with ARH / Kooks type systems that reach the rear axle?

WeeZee · 10-19-2009, 03:11 PM

Corsa, Billy-Boat, Magnaflow, Borla and Stainless Works makes great products

MARO-KEEN · 10-20-2009, 06:09 PM

On Vette's B&B sounds killer, Can't wait to hear sound clips as well.

10-16-2009, 09:55 AM	#1
Ragin Racin Drives: C6 Z06, 2011 Camaro convertable Join Date: Sep 2009 Location: Scott, LA Posts: 225	New Billy Boat 2010 Camaro Exhaust Ragin Racin is happy to bring the new 2010 B&B Exhaust system to you. We will have pictures up this week. Also our first sets are arriving this week. The B&B System will have 2 different setups, a Sport and a Classic version. They will feature 4.5 inch tips. They also have a version for the square back exhaust system. The normal retail price on the B&B Systems will be $1481.00 and we will offer them at an introductory price of $1258.85 Please give us a call to place your orders. The first 5 orders will recieve free shipping. These sets are in production now and are built when ordered. Allow 1-3 weeks before they ship out. Shawn The Press release Here is the B&B Press release. New Product Release 2010 CAMARO SS/V8 & V6 Billy Boat Performance Exhaust has been setting the pace for high performance stainless steel exhaust systems for 20 years now. B&B applies its deep racing heritage to craft one of the finest exhaust systems available. Continuing in that tradition B&B has recently introduced a line of exhaust systems for the new 2010 Chevy Camaro. CNC mandrel bent T304 stainless steel tubing is used throughout the entire system for a precise fit. The V8 is a full 3” system and is available in a classic and sport version while the V6 is a 2.5” system and is only available in the classic version. Both the V8 and V6 systems use a hand fabricated x-pipe that helps balance the exhaust pulses for better scavenging and a cleaner exhaust note. B&B has designed a muffler specifically for the Camaro using their proprietary Purge Resonance Technology or PRT. Hand fabricated out of T304 stainless steel the muffler offers increased exhaust flow and emits a nice deep muscle car bark at idle, acceleration and cruising speeds while all but eliminating the unwanted in-cabin, low frequency resonation. Performance increases of 10hp and 11ft/lbs on the V8 and 5hp and 5ft/lbs on the V6 were seen on their in house chassis dyno. For aesthetics Billy Boat Performance Exhaust incorporated their popular round double wall tips with a 4.250” on the V8 and a 4” on the V6 to give the Camaro a mean yet distinguishing look missing from the factory. The mufflers and tips are fully polished to a mirror like finish and as with all Billy Boat Performance Exhaust systems it is backed with a limited LIFETIME warranty.

10-16-2009, 12:56 PM	#4
kelleyperformance Drives: DD- 15' Chevy SS Sedan Join Date: Oct 2009 Location: Ft. Lauderdale Posts: 233	finally! B&B FTW- these systems are like art work, and sound just as good as they look __________________

10-16-2009, 01:50 PM	#5
Styffydawg SSinister Drives: Ram SS/T + Murdered Out 2SS/RS Join Date: Sep 2009 Location: Wilmington NC Posts: 82 View My Garage	I can't wait to hear the sound clips. __________________ SSinister

10-16-2009, 09:48 PM	#6
BlackM6RS/SS Drives: 2010 Black M6 RS/2SS Join Date: Oct 2009 Location: Benbrook, TX Posts: 287	Nice, B&B is known for a nice tone for sure! Sound clips next __________________ 10 Blk/Blk RS/2SS w/CGM Stripes ADM H/C/I M6 480rwhp 435rwtq FE4 LCAs w/Pfadt ZL swaybars Diff bushings Trailing arms Drop springs

10-18-2009, 12:43 AM	#7
Jferrell88 Drives: black 2ss/rs Join Date: Oct 2008 Location: Proctorville, OH Posts: 751 View My Garage	can't wait to hear this __________________

10-16-2009, 12:42 PM	#2
1meanss Drives: 2010 Black Camaro SS/RS Join Date: Oct 2009 Location: NW Indiana Posts: 173	sound clips?

10-16-2009, 12:55 PM	#3
Ragin Racin Drives: C6 Z06, 2011 Camaro convertable Join Date: Sep 2009 Location: Scott, LA Posts: 225	I will have some up in the next week or so. I have some of the first production sets coming in this week.

10-18-2009, 11:32 PM	#8
iBK3000 Drives: '04 Range Rover, Camaro 2SS 6MT Join Date: Oct 2009 Location: Portland, OR Posts: 213	I thought 2.5" was optimal tube diameter unless you turbo/supercharge? How would this system work with some ST Headers. __________________ CGM 2SS/RS 6SM . No muff.

10-19-2009, 12:56 AM	#9
Mindz E.B.A.H. Drives: you wild... Join Date: Mar 2007 Location: In the happy padded room wearing a jacket that makes me hug myself... Posts: 18,421	My stepfather loves his B&B exhaust on his porsche. I'm interested in hearing this as well... __________________ Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1

10-19-2009, 09:10 AM	#10
BOBSS Outlaw Drives: 2010SS Join Date: Jan 2009 Location: Mooresville NC Posts: 299	Do you have a solution for those with ARH / Kooks type systems that reach the rear axle?

10-19-2009, 03:11 PM	#11
WeeZee Drives: SuperSport's Join Date: May 2009 Location: Michigan Posts: 382	Corsa, Billy-Boat, Magnaflow, Borla and Stainless Works makes great products __________________ 2002 Chevy CamaroSS MN6 '08 Chevy TBSS AWD "DD" Plans : 2013 CamaroSS 1LE

10-20-2009, 06:09 PM	#12
MARO-KEEN Drives: 2001 Camaro Join Date: Mar 2009 Location: Richmond, Tx Posts: 80	On Vette's B&B sounds killer, Can't wait to hear sound clips as well.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PEDDERS SUCCESSFULLY FITS 305s ON ALL 4 CORNERS!	Info@PeddersUSA.com	Suspension / Brakes / Chassis	467	06-11-2013 09:45 PM
2010 Camaro MBRP Exhaust (cat-back with X-pipe)	linkwpc	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	69	10-08-2011 01:31 AM
An interesting Camaro (and GM) story! I just bought my 2010 Camaro!	Camarodriver	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	12	11-28-2010 03:52 PM
Vortech Supercharger Systems for 2010 Camaro Official Release	Brian@Vortech	Forced Induction - V8	98	02-19-2010 11:04 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 05:20 PM