05-04-2010, 06:15 PM | #1 |
Break Necks, Cash Checks
Drives: 2010 black Camaro 2SS/RS Join Date: Apr 2010
Location: Little Rock, AR
Posts: 701
|
Distances for SS on rear trunk lid...
Hey guys, I pulled off my SS emblem to make some changes to it, I want to get it close to the stock location, but I have no clue where that is. Can anyone measure the distance from the bottom of the trunk lid (where the emblem is) to the bottom of the SS emblem? Then also, from the right-most point of the emblem to the right edge of the trunk lid?
I just need these 2 measurements to line up the emblem correctly! Thanks! Adam
__________________
2009 CTS-V - White Diamond - intake, exhaust, wheels, visual mods
|
05-04-2010, 08:20 PM | #2 |
Drives: 2010 2SS Camaro; Join Date: Oct 2009
Location: Burbank, Illinois
Posts: 49
|
OK. I just ran out to the garage and measured mine. From the bottom edge of the trunk lid is 7/8ths of an inch and from the rightmost point of the right "S" is 1 and 1/8th of an inch. In fact when I put a "Hurst Equiped" emblem on mine ( after the Hurst shifter of course ) I used the same spacing and it looks great! Hope this helps.
|
05-04-2010, 10:32 PM | #3 |
Break Necks, Cash Checks
Drives: 2010 black Camaro 2SS/RS Join Date: Apr 2010
Location: Little Rock, AR
Posts: 701
|
Amazing. Thank you very much sir. Really appreciate it!
__________________
2009 CTS-V - White Diamond - intake, exhaust, wheels, visual mods
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CAMARO WIKI | Tran | Wiki | 66 | 04-22-2024 11:41 AM |
who has the best bushings? | VRMMMM | Suspension / Brakes / Chassis | 10 | 05-07-2010 06:11 PM |
how to remove the cover on the underside of the trunk lid? | spectrepig | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 7 | 12-23-2009 09:26 AM |
SS / RS trunk lid emblem redesign | dragonZ28 | Cosmetics and Lighting Modification Discussions | 91 | 10-08-2009 07:38 PM |
Stripes on rear deck lid | roodns | Cosmetics and Lighting Modification Discussions | 7 | 09-03-2008 04:19 PM |