FS QTP Electric Cutouts *Never Installed* - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

3Black · 03-15-2015, 04:10 PM

I have a pair of QTP electric cutouts for sale. I never installed them because I went a different route with my exhaust. I am asking $370 and they come withh all the wiring and a switch.

Casper954 · 03-15-2015, 06:16 PM

Do you have the dump pipes for these?

3Black · 03-15-2015, 07:05 PM

Quote:

Originally Posted by Casper954

Do you have the dump pipes for these?

No, these install on y pipes (which I can include if you would like but are not from qtp) which basically have dump pipes connected to them. If you were to put dump pipes on these, ground clearance would be very poor.

revived · 03-15-2015, 10:50 PM

These really aren't ideal for Camaros, QTP suggests and I used There "LOW PROFILE" model.

would you sell a single one, my buddy wants it for his truck what size is the opening?

3Black · 03-16-2015, 12:13 AM

Quote:

Originally Posted by revived

These really aren't ideal for Camaros, QTP suggests and I used There "LOW PROFILE" model.

would you sell a single one, my buddy wants it for his truck what size is the opening?

The Low profile, after dump pipes are installed, are at about at the same level as these with a properly installed Y pipe. I cannot part unless you find somebody else who can buy the other one. The size is 2.5 inches.

3Black · 03-16-2015, 12:17 AM

Quote:

Originally Posted by revived

These really aren't ideal for Camaros, QTP suggests and I used There "LOW PROFILE" model.

would you sell a single one, my buddy wants it for his truck what size is the opening?

The ones in this pic are very similar, if properly placed, their clearance is almost the same as the exhaust itself. Another benefit of these is you don't have to cut a hole in your exhaust, you just take a piece out for the y pipe then once you want to go back to stock, cut the y pipe out and weld in the stock piece

revived · 03-16-2015, 02:12 AM

Yes that would work good as a muffler delete. I was referring tho the "S pipe location?" right after the headers.

here:

randyzell · 03-16-2015, 05:44 AM

might be interested. just talking with a few guys how these would be installed on my car

3Black · 03-16-2015, 09:07 PM

BUMP

3Black · 03-17-2015, 11:09 AM

BUMP

3Black · 03-18-2015, 09:41 AM

Bump

3Black · 03-22-2015, 11:55 PM

Still available

djpelosi · 03-23-2015, 08:42 AM

2 1/2" or 3" cutouts? You have a pic with the dumps installed?

3Black · 03-23-2015, 04:27 PM

2.5 inch, these mount on the provided y pipes so dump pipes are not necessary. They are brand new so I do not have any installed pics.

03-15-2015, 04:10 PM	#1
3Black Account Suspended Drives: 2014 1SS/RS M6 Join Date: Feb 2014 Location: California Posts: 365	FS QTP Electric Cutouts Never Installed I have a pair of QTP electric cutouts for sale. I never installed them because I went a different route with my exhaust. I am asking $370 and they come withh all the wiring and a switch. Attached Images

03-15-2015, 06:16 PM	#2
Casper954 Drives: 2010 Camaro 2SS Join Date: Feb 2013 Location: South Florida/ Orlando Posts: 450	Do you have the dump pipes for these? __________________ Appearance: Blacked out tail lights, Oracle Plasma fogs, SLP Carbon Fiber splitter, Carbon Fiber Hash Marks, Carbon Fiber ZL1 hood, 20" Giovanna Kilis rims, Eibach lowering springs Performance: Straight-piped magnaflow exhaust, K&N intake

03-15-2015, 10:50 PM	#4
revived Vrrrm. Drives: 2011 2SS/RS LS3 Join Date: Jun 2013 Location: MA Posts: 1,495	These really aren't ideal for Camaros, QTP suggests and I used There "LOW PROFILE" model. would you sell a single one, my buddy wants it for his truck what size is the opening? __________________

03-16-2015, 02:12 AM	#7
revived Vrrrm. Drives: 2011 2SS/RS LS3 Join Date: Jun 2013 Location: MA Posts: 1,495	Yes that would work good as a muffler delete. I was referring tho the "S pipe location?" right after the headers. here: __________________

03-23-2015, 08:42 AM	#13
djpelosi Drives: 2010 Camaro 2SS/RS Join Date: Aug 2012 Location: Cordova, TN Posts: 774	2 1/2" or 3" cutouts? You have a pic with the dumps installed? __________________ 2010 Camaro 2SS M6 2" Stainless Power Longtube Headers 3" Full exhaust w/ Off-Road H-Pipe Bo White Ported Throttle Body Hurst Short Throw Shifter Best Time: 12.43 @ 114, 1.99 60' on stock wheels and stock tires Build Thread

03-16-2015, 05:44 AM	#8
randyzell Drives: 1le Join Date: Apr 2014 Location: indiana Posts: 154	might be interested. just talking with a few guys how these would be installed on my car

03-16-2015, 09:07 PM	#9
3Black Account Suspended Drives: 2014 1SS/RS M6 Join Date: Feb 2014 Location: California Posts: 365	BUMP

03-17-2015, 11:09 AM	#10
3Black Account Suspended Drives: 2014 1SS/RS M6 Join Date: Feb 2014 Location: California Posts: 365	BUMP

03-18-2015, 09:41 AM	#11
3Black Account Suspended Drives: 2014 1SS/RS M6 Join Date: Feb 2014 Location: California Posts: 365	Bump

03-22-2015, 11:55 PM	#12
3Black Account Suspended Drives: 2014 1SS/RS M6 Join Date: Feb 2014 Location: California Posts: 365	Still available

03-23-2015, 04:27 PM	#14
3Black Account Suspended Drives: 2014 1SS/RS M6 Join Date: Feb 2014 Location: California Posts: 365	2.5 inch, these mount on the provided y pipes so dump pipes are not necessary. They are brand new so I do not have any installed pics.