Headlights

[Baggie Austin]

The headlights on my 2010 camaro are woeful!

Anyone upgraded bulbs/lights with decent success?

[Uk Blown SS]

http://www.ebay.co.uk/itm/Ultra-H13-...wAAOxyzqdTcfHw Something like this may help

[Molehill_Mike]

My SS/RS HIDs are pretty awful too. I've read that the housings can suffer over time, and also the bulbs intensity can dimmer over the years too.

Plus I have a dim HALO on passenger side. So I either need a new passenger headlight, new bulbs, or I might just go aftermarket set.

Annoying... :(

[Uk Blown SS]

I have a stock halo LED you can have, pm me if you like.

[redleader]

Originally Posted by Uk Blown SS

http://www.ebay.co.uk/itm/Ultra-H13-...wAAOxyzqdTcfHw Something like this may help

Hey Uk Blown SS,

Will those plug-in to Stock on my 2010 V6 LT without any additional harness?

Cheers,

James [redleader]

[Baggie Austin]

Originally Posted by Molehill_Mike

My SS/RS HIDs are pretty awful too. I've read that the housings can suffer over time, and also the bulbs intensity can dimmer over the years too.

Plus I have a dim HALO on passenger side. So I either need a new passenger headlight, new bulbs, or I might just go aftermarket set.

Annoying... :(

I haven't been able to find many aftermarket ones

[Uk Blown SS]

I just have the original from the RS HID lamp. They won't fit non HID. As I have all singing and dancing RGB I don't need them.

[Molehill_Mike]

Originally Posted by Uk Blown SS

I have a stock halo LED you can have, pm me if you like.

Including board? Will PM! Thanks!

I've also ordered 6000K HID bulbs, as mine are 7 years old and I suspect they are dying. Fingers crossed this improves them. If not, it's £70 for spares, but worth having anyway. GM ones were $120 each, but these from Diode Dynamics were cheaper, for a pair!

https://www.diodedynamics.com/store/...-oem-hid-bulbs

[Uk Blown SS]

The LED sits on a hexagonal board. You will need to remove the bumper and headlamp. Then fiddle with a long thin torx screwdriver and get the old one out. Do a little wiring join and refit it all. Also check your headlamp aims, they could just be set to low. The HID's pretty good.

[Uk Blown SS]

Originally Posted by redleader

Hey Uk Blown SS,

Will those plug-in to Stock on my 2010 V6 LT without any additional harness?

Cheers,

James [redleader]

Something like this is a straight upgrade for the non HID lamp. They are normally miles better than stock, a brighter,whiter light.

[Molehill_Mike]

Originally Posted by Uk Blown SS

The LED sits on a hexagonal board. You will need to remove the bumper and headlamp. Then fiddle with a long thin torx screwdriver and get the old one out. Do a little wiring join and refit it all. Also check your headlamp aims, they could just be set to low. The HID's pretty good.

Thanks bud!