Skunk's 13 SS HWE \m/ *_* \m/

[SkunkJunk420]

I took the front and back vinyl wraps off and the black side fins. Also the camaro and hot wheels emblem on the sides and bowtie on the rear

[SkunkJunk420]

I need to change the title to Skunk’s Blue Bomber! Speaking of megaman, this car put in some nice numbers in complete stock trim Coming in with an average of 386 rear wheel horse power and 388 torque, it did have a hero run of 390rwhp and 395tq!!!

[SkunkJunk420]

More pics and updates coming soon! Im working on getting a drap pack for my 17 ZL1 I hear they are interchangeable for this car too! Ill put them on and see and let y’all know

[SkunkJunk420]

Long overdue update I have been focused on racing in every aspect possible. I got to take my ZL1 on the Circuit of the Americas for road course. I’ve been to the drag strip with my GT and both camaros multiple times. AND this saturday I will be trying my hand and some drifting and im taking the SS out there. Heres an update. They require either lowering springs or coilovers so I just threw some BMR 1.25 springs on and Im good to go I put the HRE’s back on cause the tires are getting old and I figured I would burn’em up and put them to use sliding around. Ill get around to more updates as they come



PS: The mustang gt A10 (2020 with stock 255/35/19 all the way around fully stock motor. trans, suspension) did a 12.2 at 116mph with a 1.9 60ft

The 2013 Camaro SS M6 on forgestar F14 20x10 front (275/35/20) 20x11 rear (315/35/20) went 13.2 at 109mph with a 2.2 60ft.

AND the ZL1 fully stock, stock wheel and tire went 11.7 at 125mph with a 1.9 60ft

[SkunkJunk420]

Took all the vinyl off the car. Got it looking pretty good. Next will be windshield replacement along with various trim pieces. Then making the paint look nice and shiny.