Line lock experiance - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

beersngars · 01-20-2019, 08:07 PM

I picked up some Hawk ceramic pads to help with the damn dust. Also bought a few bottles of Motul dot 4 to flush out the system and thought about adding a line lock while I'm at it. I don't drag race or just do smoke shows but thought it would be nice to add a little heat if I want to get a little aggressive on the right road. So far I'm liking the Hurst direct fit kit rather than fabricating the mount and line. Anyone have feed back good or otherwise?

d454brisson · 01-20-2019, 09:26 PM

I have the hurst kit specific for camaro, (567-1518) Super easy install, I mounted a single lighted Aircraft toggle near the Dome light and Homelink.

This way you open the toggle, pump the brakes and flip the switch to engage.

When ready to disengage during burn out just flip the lid closed (big target for hand) and roll out.

*SSE 4 2SS* · 01-20-2019, 09:43 PM

I run the SJM kit. It fits like a glove.

sjmmanufacturing dot com

We wired it into the horn button... There is a switch on the center console, that powered the system. The horn then actuates the system. Step on the brakes, push the horn button, then release the brakes.... I start my burnout and then release the horn button when I'm ready to roll out....

@ReaperZL1 · 01-21-2019, 01:49 PM

has anyone tried both the sjm and the hurst kit and can give first hand pros and cons about each kit? looking at ordering one myself

beersngars · 01-21-2019, 06:55 PM

This is the first time I've heard of the SJM kit. I like to buy the best the first time. Will have to do some DD.

@ReaperZL1 · 01-21-2019, 07:12 PM

I know one of the youtubers I watch has one on his zl1 and he only had a problem with it once if I remember correctly. other than that it works great. he does have an auto though

01-20-2019, 08:07 PM	#1
beersngars Account Suspended Drives: 2012 ZL1 Join Date: May 2017 Location: Ohio Posts: 140	Line lock experiance I picked up some Hawk ceramic pads to help with the damn dust. Also bought a few bottles of Motul dot 4 to flush out the system and thought about adding a line lock while I'm at it. I don't drag race or just do smoke shows but thought it would be nice to add a little heat if I want to get a little aggressive on the right road. So far I'm liking the Hurst direct fit kit rather than fabricating the mount and line. Anyone have feed back good or otherwise?

01-20-2019, 09:43 PM	#3
SSE 4 2SS Boosted Moderator Drives: Bone Stock LS3 Join Date: Sep 2009 Location: Marion Tx Posts: 15,491	I run the SJM kit. It fits like a glove. sjmmanufacturing dot com We wired it into the horn button... There is a switch on the center console, that powered the system. The horn then actuates the system. Step on the brakes, push the horn button, then release the brakes.... I start my burnout and then release the horn button when I'm ready to roll out.... Attached Images __________________ If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough...

01-20-2019, 09:26 PM	#2
d454brisson Drives: 2014 ZL1 Join Date: Jul 2016 Location: Baltimore MD Posts: 345	I have the hurst kit specific for camaro, (567-1518) Super easy install, I mounted a single lighted Aircraft toggle near the Dome light and Homelink. This way you open the toggle, pump the brakes and flip the switch to engage. When ready to disengage during burn out just flip the lid closed (big target for hand) and roll out.

01-21-2019, 01:49 PM	#4
@ReaperZL1 Drives: 2013 camaro zl1 aka the Reaper Join Date: Apr 2018 Location: North carolina Posts: 237 View My Garage	has anyone tried both the sjm and the hurst kit and can give first hand pros and cons about each kit? looking at ordering one myself

01-21-2019, 06:55 PM	#5
beersngars Account Suspended Drives: 2012 ZL1 Join Date: May 2017 Location: Ohio Posts: 140	This is the first time I've heard of the SJM kit. I like to buy the best the first time. Will have to do some DD.

01-21-2019, 07:12 PM	#6
@ReaperZL1 Drives: 2013 camaro zl1 aka the Reaper Join Date: Apr 2018 Location: North carolina Posts: 237 View My Garage	I know one of the youtubers I watch has one on his zl1 and he only had a problem with it once if I remember correctly. other than that it works great. he does have an auto though