2015 Stabilitrac Issue - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ZEDL1 · 11-29-2018, 02:25 AM

Quote:

Originally Posted by NVRL8 ZL1

You could try to disconnect the battery and let sit for a few minutes, re-connect.

If the problem persists or comes back, a trip to the dealer is the best bet

This was the fix. Thanks NVRL8.
Thank you to you and all of the other members who responded trying to help me.
I disconnected the negative battery terminal just yesterday (Ive been over occupied moving from Canada to America, and into our new home). I left it for about 20 minutes, reconnected and it is now perfect. I wanted to thank all of you for your input, your suggestions and insights, and for your help. C5 is great group.
Jim
Jim

Rami ZL1 · 12-02-2018, 02:32 AM

The car shuddering might be a mis-firing issue.
I assume:
- Loose spark plugs wires (Check them being well inserted from both sides).
- Spark plugs condition.
- Coils

To make your search easier you can connect it to a reader to show which cylinder is mis-firing and start swiping above 3 of the mis-firing cylinder with another one and check if the issue still exists on the same cylinder or a different one

12-02-2018, 02:32 AM	#16
Rami ZL1 Drives: 2013 Camaro ZL1 Manual Join Date: Jun 2018 Location: Qatar Posts: 12 View My Garage	The car shuddering might be a mis-firing issue. I assume: - Loose spark plugs wires (Check them being well inserted from both sides). - Spark plugs condition. - Coils To make your search easier you can connect it to a reader to show which cylinder is mis-firing and start swiping above 3 of the mis-firing cylinder with another one and check if the issue still exists on the same cylinder or a different one __________________ Manual 2013 ZL1 - Kooks LTH, JLT CAI, Nick Williams 102mm TB with 107mm spacer, Weapon X S/C spacer, 10" Crank pulley, 2.7" supercharger pulley, ZR1 cam shaft, Alky methanol kit, AFCO heat exchanger. 725 WHP - 730 TQ Boost 16.5 PSI