12-26-2018, 11:32 AM | #1 |
Drives: 2012 Camaro SS Convertible Join Date: Nov 2014
Location: California
Posts: 22
|
Full suspension Revamp
Hey Guys,
I have a 2011 Chevrolet Camaro SS where I can see the ride quality has detoriated and I wish to replace the worn out suspension parts. Are the following parts good enough or do I need to get any other parts? Front Struts and Strut Mounts Rear Shock and Shock Mounts Do I need to replace any other parts like insulators or springs etc? I will get a local shop to install them. |
12-26-2018, 11:57 AM | #2 |
That's a good start. One thing with higher mileage cars that makes them feel "old" are worn bushings.
If you really want to revamp to like new feel, replace them all with OEM or better. New shocks and mounts of course should go along with it.
__________________
468, Mishimoto rad + oil cooler, TSP LTH
MCS 2WNR CTSV/ZL1 front calipers/rotors + G-Loc Forgestar CF-5 19x11 |
|
12-26-2018, 12:01 PM | #3 |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
How many miles are on your SS?
|
12-27-2018, 02:35 PM | #4 |
Drives: 2012 Camaro SS Convertible Join Date: Nov 2014
Location: California
Posts: 22
|
|
12-27-2018, 04:10 PM | #5 |
USA-1
|
You DEFINITELY want new donut isolators, mine were shot when I took my stuff apart.
If I were you, I would run the FE4 setup which is a slight upgrade from your stock setup.
__________________
"A Camaro in the garage is safe, but that's not what Camaros are built for..."
R2C CAI / Apex Scoop / VMAX Ported TB / Speed Engineering LTHs / X-pipe / GPI port/rod-mod intake manifold / Circle D 3200 278mm Converter / 3.91 gears / DynoSteve tuned / 1LE Shocks/Struts/Toe Links / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Tranny Dipstick / 2012+ Heater Hose / 2013+ Rearview Mirror / Fuel rail flip / Drake shifter / Oil Cooler Delete |
01-03-2019, 01:09 PM | #6 |
Engineer
Drives: 2014 Camaro 2SS RS 1LE Join Date: Jun 2015
Location: SE Michigan
Posts: 230
|
Rubber should be fine on the joints, Id get new top mounts and shocks/springs for sure.
__________________
2014 Red Hot Camaro 2SS RS 1LE
-Sunroof Delete, Recaro, Nav, NPP -Pegasus Subframe Bushings, JPSS Radius Insert, Detroit Speed Caster Mod, PMAS Intake, Solo High Flow Cats, Ecsta PS91 Tires, MGW Shifter, Pegasus Offset Poly Diff Bushing |
|
|
|
|