09-11-2019, 10:31 PM | #1 |
|
Brian Tooley pushrods bent out of the box
So I'm a bit pissed tonight after receiving my 7.425" pushrods from BTR. I guess I'm an idiot for only ordering 8 instead of a few extra. The other 8 are 7.400". So I took them out of the bag and as customary at my house, I rolled them on the granite in the kitchen. They all looked good except the last two. One was so bad I got my .005" feeler gauge out and was able to slide it under the rod without snag. I know it would be worse if I had a runout fixture. I took Friday off work to get these installed and now have to fly more in RED freight to have them in time. This sucks!
|
09-12-2019, 03:18 PM | #2 |
fo'shizZL1
Drives: 2017 ZL1 Join Date: Aug 2017
Location: ATL
Posts: 1,281
|
Dang! I didn't even think to check mine. I hope they are straight!!
__________________
2017 ZL1 M6 Black | Maggie 2650 // 103TB // Big Gulp
Past Rides- 2014 ZL1 M6 Red Hot | Tons of mods 2004 CTS-V M6 Silver | Many mods 1995 Corvette M6 Torch Red | A few more mods 1992 Camaro M5 White | A few mods |
09-12-2019, 09:48 PM | #3 | |
|
Quote:
**UPDATE** I got the 6 PR's today and found 8 good ones out of the 14 to use for the build. Sending the rest back along with some stuff I didnt use. Last edited by FasNuf; 09-14-2019 at 01:01 AM. |
|
09-17-2019, 12:11 PM | #4 |
Drives: 2014 ZL1 Join Date: Apr 2018
Location: KCMO
Posts: 180
|
Always, always check push rods on a piece of glass for flatness and a light to make sure nothing is inside them.
|
09-21-2019, 09:01 AM | #5 |
|
Yes, your right. I checked all the push rods and some had dirt inside. Good idea to clean and inspect all internal parts before adding to the engine. I'm happy with the rods so far, just had to hand pick them and return the rest. BTR has been great to deal with as far as returns and technical support.
|
10-04-2019, 08:18 AM | #6 |
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,663
|
No one is perfect. It's always good to double check stuff.
|
|
|
|
|