You are browsing camaro5 
 |
|
06-08-2014, 06:17 PM
|
#1 |
|
Blowin the doors off!
Drives: A 2013 SS RS 6M SR Join Date: Apr 2010
Location: Phoenix, AZ
Posts: 2,390
|
STR 607's
Anyone heard or know anything about the brand "STR"? I'm looking at the STR 607's. With a machined face in the following specs:
Wheel Size :FRONT: 20X9** /*REAR*:20X10.5 Bolt Pattern*:*5X120 Offset :**FRONT: +30**REAR*+35 Hub Size :*72.6 PART # FRONT :*STR6072090512030726SMFPART # REAR *:*STR60720105512035726SMF Think this offset would still fit? And would my factory Pirelli's transfer over, or am I looking at New rubber too? 854 shipped Tim
__________________
 2G1FS1EWXD9163847 |
|
|
|
06-08-2014, 07:33 PM
|
#2 |
            
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
I know the rear wheel will fit and I THINK it will clear the brembos. I know my rear wheels are that exact width and offset and they fit. I don't see why the fronts won't fit since mine are a +35 offset and a +30 just means they'll be 5 mm closer to the fender. What you could do is try the tires but I think a 275 might be pushing it on a 10.5. What you could do is transfer the rear tires to the front wheels then you'd only need to buy rear tires
__________________
 Click Picture for Build Thread |
|
|
|
|
06-08-2014, 08:14 PM
|
#3 |
|
Blowin the doors off!
Drives: A 2013 SS RS 6M SR Join Date: Apr 2010
Location: Phoenix, AZ
Posts: 2,390
|
I thought I just want to keep the fronts as centered as possible. The tire swap could work, hadn't thought of that.
__________________
2G1FS1EWXD9163847 |
|
|
|
|
|
|
|
 |
|
|
