08-05-2017, 10:24 AM | #1 |
Drives: 2010 2ss 2014 1ss Join Date: Aug 2017
Location: Anderson
Posts: 3
|
Swapped everything out of a 2014 ss to a 2010 ss
I swapped complete electrical system from the 2014 to the 2010 also engine and tranny fuel system ignition ecm bcm the on star when I turn on the ignition all lights light up when I turn the key all the way all guages bounce forward and go back to zero any help or suggestions would be appreciated thank you in advance
|
08-05-2017, 07:48 PM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,060
|
Does the car not start or roll over? Gauges are supposed to bounce or am I / we missing something???
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
08-05-2017, 08:44 PM | #3 |
Drives: Miss Con Ception Join Date: Aug 2016
Location: Chicagoland
Posts: 2,999
|
That is the way the gauges work on 2010s and '11s. They perform a sweep.
People complained, for some reason unknown to me. So they them changed beginning with the '12s or '13s.
__________________
2011 1SS/RS LS3 CGM
|
08-06-2017, 03:50 AM | #4 | |
Drives: 2012 1SS M6 IOM Join Date: Dec 2012
Location: New Rochelle New York
Posts: 1,428
|
Quote:
13-15 were removed.
__________________
2012 1SS Camaro LS3 Inferno Orange
Mods: LSA Supercharger, 2.55 Pulley, Custom Boost Cam, ARH LTH 1 7/8, HFC, 3' Magnaflow Exhaust, JLT CAI, Elite CC V2, BO White Stage 2 TB, GM 3.91 Gears, DSS CF Driveshaft, BMR Bushing Kit.... . Tuned by JTM Motorsports 540 Hp 550Tq on 9PSI Axles, Monster Clutch, Hotchkis TVS Track Pack kit.......For 2018. |
|
|
|
Thread Tools | |
|
|