Roof Wrap? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

43Camaro · 05-12-2018, 10:50 AM

Anyone know who makes a pre cut roof wrap for 5th gen Camaro. Wanted Satin Black? Searched all over, I know I can have someone wrap it, but wanted to apply myself, but wanted it pre cut..

lawdog · 05-12-2018, 11:16 AM

I would try XTreme graphics in Chicagoland area. His shop is in Lombard, IL talk to Steve. know they do wraps for the whole car so he may precut for you and ship.

43Camaro · 05-12-2018, 12:06 PM

Thanks Lawdog, I sent him an email.

BikeNBird · 05-21-2018, 01:23 PM

You're probably never going to find a precut section for something that large. Reason being, for something that size and shape, you're going to want whats called a "cast" vinyl (also referred to as wrapping vinyl). With it being a cast vinyl it's meant to be stretched, pulled, and molded to whatever you're wrapping. Pre-cut vinyls are almost always a "calendared" vinyl which is meant to hold it's shape, but will not allow the stretching, pulling, etc. so those are better fit for emblem inlays and things of that nature. Wrapping a roof is EASY. It's super intimidating but get yourself some GOOD high quality vinyl (I prefer 3m 1080) and spend an hour or so searching some how-to's on YouTube. A roof is a GREAT thing to learn how to wrap. And on the camaros is about the easiest youll get. Pop the plastic pieces between the roof and doors and then cut a small hole for the antenna and you're good to go.

SSEssence · 05-21-2018, 01:39 PM

You can always just buy a roll of vinyl (pre measure of course) from Amazon from 3M or Vvivid and if you're scared about trimming, you can use knifeless tape:

https://www.amazon.com/dp/B00XULNZI0...a-308718976069

orange devil · 05-21-2018, 02:08 PM

And if you decide to do it yourself don't forget the knifeless tape. try to avoid using an exacto knife

05-12-2018, 10:50 AM	#1
43Camaro Drives: [COTW 8/3/15] 2010 Camaro SS L99 Join Date: Mar 2015 Location: Mooresville NC Posts: 434 View My Garage	Roof Wrap? Anyone know who makes a pre cut roof wrap for 5th gen Camaro. Wanted Satin Black? Searched all over, I know I can have someone wrap it, but wanted to apply myself, but wanted it pre cut.. __________________ A Little bit of power. ALL WORK DONE BY ME! Just added 2021 ZL1 1LE to the Stable! https://www.camaro5.com/forums/showthread.php?t=418273

05-12-2018, 12:06 PM	#3
43Camaro Drives: [COTW 8/3/15] 2010 Camaro SS L99 Join Date: Mar 2015 Location: Mooresville NC Posts: 434 View My Garage	Thanks Lawdog, I sent him an email. __________________ A Little bit of power. ALL WORK DONE BY ME! Just added 2021 ZL1 1LE to the Stable! https://www.camaro5.com/forums/showthread.php?t=418273

05-21-2018, 01:23 PM	#4
BikeNBird Drives: 2014 2SS 1LE Join Date: May 2018 Location: San Antonio Posts: 10	You're probably never going to find a precut section for something that large. Reason being, for something that size and shape, you're going to want whats called a "cast" vinyl (also referred to as wrapping vinyl). With it being a cast vinyl it's meant to be stretched, pulled, and molded to whatever you're wrapping. Pre-cut vinyls are almost always a "calendared" vinyl which is meant to hold it's shape, but will not allow the stretching, pulling, etc. so those are better fit for emblem inlays and things of that nature. Wrapping a roof is EASY. It's super intimidating but get yourself some GOOD high quality vinyl (I prefer 3m 1080) and spend an hour or so searching some how-to's on YouTube. A roof is a GREAT thing to learn how to wrap. And on the camaros is about the easiest youll get. Pop the plastic pieces between the roof and doors and then cut a small hole for the antenna and you're good to go. __________________

05-21-2018, 01:39 PM	#5
SSEssence Instagram: Sangstah Drives: 2019 Camaro 1LE Join Date: Sep 2016 Location: Buena Park, CA. Posts: 2,802 View My Garage	You can always just buy a roll of vinyl (pre measure of course) from Amazon from 3M or Vvivid and if you're scared about trimming, you can use knifeless tape: https://www.amazon.com/dp/B00XULNZI0...a-308718976069 __________________ 2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold Follow the build https://www.camaro6.com/forums/showthread.php?t=612717

05-12-2018, 11:16 AM	#2
lawdog Drives: 2010 SSII w RS & Sunroof Yellow Join Date: Aug 2009 Location: West Suburbs of Chicago, in a Courthouse Somewhere Posts: 953	I would try XTreme graphics in Chicagoland area. His shop is in Lombard, IL talk to Steve. know they do wraps for the whole car so he may precut for you and ship.

05-21-2018, 02:08 PM	#6
orange devil Account Suspended Drives: 2019 SS 2019 mustang GT Join Date: Apr 2017 Location: California Posts: 1,694	And if you decide to do it yourself don't forget the knifeless tape. try to avoid using an exacto knife