Factory backup camera - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BadSS · 12-31-2018, 06:49 PM

I am going to install a factory backup camera to my 2015 Camaro that was recently upgraded to MyLink. I have the camera but the car does not have the connector on the harness and would like to know if anyone knows the brand (Molex, Delphi) and part number of the connector I need. Also does anyone know the pinout of the wiring.

Deputy347k9 · 01-01-2019, 06:37 AM

Your best bet is to call GEN5Diy at 928-505-1383 Monday-Friday 0700-1500 PDT. I assure you that they have everything you need to have a factory install. I have dealt with them on a couple of occasions and have found no one better when it comes to our Camaros.

BadSS · 01-17-2019, 09:26 PM

They did my navigation reprogram also bought the harness for it. I didn't want to spend 80$ so I just purchased some Molex 150 connectors and cut the factory plug off and replaced with the Molex. I then made my own wiring harness with some shielded wire and everything works perfectly.

SS 310H55A · 01-25-2019, 09:32 AM

Anyone know if you can add the guiding lines on a ‘14 backup cam?

2SSRS@Gen5diy · 01-29-2019, 10:06 AM

Quote:

Originally Posted by SS 310H55A

Anyone know if you can add the guiding lines on a ‘14 backup cam?

it can be done

SS 310H55A · 01-29-2019, 11:18 AM

Quote:

Originally Posted by 2SSRS@Gen5diy

it can be done

Do you know off hand what’s needed?

2SSRS@Gen5diy · 01-29-2019, 09:17 PM

On your 14 head unit needs to be reprogrammed.

12-31-2018, 06:49 PM	#1
BadSS Drives: 08 GMC Join Date: Jun 2009 Location: Somewhere in TX Posts: 92	Factory backup camera I am going to install a factory backup camera to my 2015 Camaro that was recently upgraded to MyLink. I have the camera but the car does not have the connector on the harness and would like to know if anyone knows the brand (Molex, Delphi) and part number of the connector I need. Also does anyone know the pinout of the wiring.

01-01-2019, 06:37 AM	#2
Deputy347k9 Drives: 2014 Ashen Gray Convertible Join Date: Apr 2017 Location: Havelock, NC Posts: 1,328	Your best bet is to call GEN5Diy at 928-505-1383 Monday-Friday 0700-1500 PDT. I assure you that they have everything you need to have a factory install. I have dealt with them on a couple of occasions and have found no one better when it comes to our Camaros. __________________

01-25-2019, 09:32 AM	#4
SS 310H55A Drives: 2014 Camaro SS Join Date: Jan 2019 Location: Southern California Posts: 253	Anyone know if you can add the guiding lines on a ‘14 backup cam? __________________ 2014 SS \| MGW Flat Stick shifter \| Raceseng Slammer shift knob \| Z/28 spoiler and grill

01-17-2019, 09:26 PM	#3
BadSS Drives: 08 GMC Join Date: Jun 2009 Location: Somewhere in TX Posts: 92	They did my navigation reprogram also bought the harness for it. I didn't want to spend 80$ so I just purchased some Molex 150 connectors and cut the factory plug off and replaced with the Molex. I then made my own wiring harness with some shielded wire and everything works perfectly.

01-29-2019, 09:17 PM	#7
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	On your 14 head unit needs to be reprogrammed.