06-18-2014, 02:01 AM | #1 |
Need advice on repainting calipers
Recently I painted my calipers blue with a brush using G2 paint. There are some slight imperfections due to using a brush, but now I want to paint it red. Do I need to completely get rid of the new paint on the caliper with brake cleaner or can I get away with just sanding it? Oh yah I have the brembo decals on it too. Thanks in advance!
__________________
Rotofab CAI, VMAX PTB, Borla S axle-back, Dynatech SuperMaxx 1 7/8" headers/HF cats, No weeds exhaust diverters, Apex air scoop & catch can, Rohana wheels, MPD1 Z-Force Hood, BTR Stage 3 cam, Vitesse Throttle Controller, etc...
|
|
06-18-2014, 05:31 AM | #2 |
My Dream Car
Drives: 2011 SIM LS3 1SS Join Date: Jul 2009
Location: staten island
Posts: 1,534
|
Buy paint stripper and use a wire brush, your old paint will come right off then, sand and clean, always better to work from a clean and new surface
__________________
CAI intake/ADM Scoop/Stainless Power Headers/Dynatech cat back exhaust/Vitesse Throttle Control/ Ported Throttle Body/QTP Electric Cutouts/ 3.91 gears and janetty rear posi/ Tuned by Janetty racing
|
06-18-2014, 12:02 PM | #3 |
Thanks for the reply. I Will follow your advice.
__________________
Rotofab CAI, VMAX PTB, Borla S axle-back, Dynatech SuperMaxx 1 7/8" headers/HF cats, No weeds exhaust diverters, Apex air scoop & catch can, Rohana wheels, MPD1 Z-Force Hood, BTR Stage 3 cam, Vitesse Throttle Controller, etc...
|
|
|
|
|
|