clear car bra install in va - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

mikescamaro12 · 02-22-2014, 10:08 PM

anyone have suggestions for a good clear car bra installer here in virginia , would prefer closer to virginia beach but would be willing to travel for a good installer . thank you

22385 · 03-19-2014, 07:38 PM

I forgot to write his name down, but he comes highly recommended. He is located in Chesapeake, Va. His # is 757-547-0864. Since I got the third ding on my '13, I have been contemplating have mine done. Good luck and please let me know how it turns out.

mikescamaro12 · 03-19-2014, 08:36 PM

Quote:

Originally Posted by 22385

I forgot to write his name down, but he comes highly recommended. He is located in Chesapeake, Va. His # is 757-547-0864. Since I got the third ding on my '13, I have been contemplating have mine done. Good luck and please let me know how it turns out.

i found a great set of guys at Ultrashield of Hampton Roads in Chesapeake (757) 819-7159
Email info@ultrashield-hr.com
they did a great job on my camaro and they offered a 5 year warranty..

BasedSS · 03-19-2014, 08:51 PM

I know of a really good place in Nova, about 5min from Dulles Airport. May be to far for you though...

esco214 · 03-25-2014, 07:52 AM

Quote:

Originally Posted by mikescamaro12

i found a great set of guys at Ultrashield of Hampton Roads in Chesapeake (757) 819-7159
Email info@ultrashield-hr.com
they did a great job on my camaro and they offered a 5 year warranty..

Mike,

Are they pretty reasonable priced? I'm thinking of getting it done and on the sides where rocks are throwing up by the wheel well, I would like to see how yours came out. Can you post some pics.

jrhagen · 03-25-2014, 08:37 AM

Just make sure the install is CAD cut and not bulk cut. With bulk cut, all cutting and trimming is done with a blade on your car. You will end up with slices and you won't know it until the material is removed.

esco214 · 03-25-2014, 08:52 AM

Quote:

Originally Posted by jrhagen

Just make sure the install is CAD cut and not bulk cut. With bulk cut, all cutting and trimming is done with a blade on your car. You will end up with slices and you won't know it until the material is removed.

Thanks for the heads up. Good info!

mikescamaro12 · 03-25-2014, 11:20 AM

Quote:

Originally Posted by esco214

Mike,

Are they pretty reasonable priced? I'm thinking of getting it done and on the sides where rocks are throwing up by the wheel well, I would like to see how yours came out. Can you post some pics.

yes they are pretty good and i will post some pics

CamaroJim56 · 03-25-2014, 05:03 PM

And who would that be? I could use one as well.

Thanks,

Jim

Quote:

Originally Posted by BasedSS

I know of a really good place in Nova, about 5min from Dulles Airport. May be to far for you though...

scubadoo7 · 03-25-2014, 07:24 PM

Quote:

Originally Posted by CamaroJim56

And who would that be? I could use one as well.

Thanks,

Jim

+1

RavenZL1 · 03-26-2014, 07:40 AM

If you are looking for N. VA area, David at ProShieldinc in Sterling is excellent. He has done several of my cars including the ZL1

mikescamaro12 · 03-26-2014, 11:25 AM

here is some pics from the install both hood and side panel .

esco214 · 03-26-2014, 12:21 PM

Quote:

Originally Posted by mikescamaro12

here is some pics from the install both hood and side panel .

Looks great, I will defintely have to hit up this weekend and see what they can do, I really need the sides where the rocks are being thrown up from the front and rear tires.

BasedSS · 03-27-2014, 08:18 PM

Quote:

Originally Posted by RavenZL1

If you are looking for N. VA area, David at ProShieldinc in Sterling is excellent. He has done several of my cars including the ZL1

If you dont mine me asking how much does he charge?

02-22-2014, 10:08 PM	#1
mikescamaro12 Drives: 2014 chevy camaro 2lt RS Join Date: Nov 2013 Location: virginia beach, va Posts: 241 View My Garage	clear car bra install in va anyone have suggestions for a good clear car bra installer here in virginia , would prefer closer to virginia beach but would be willing to travel for a good installer . thank you __________________ GMG1(SW) usn ret Battleship sailor

03-19-2014, 08:51 PM	#4
BasedSS Drives: 2014 SS Join Date: Jan 2014 Location: Reston, VA Posts: 254	I know of a really good place in Nova, about 5min from Dulles Airport. May be to far for you though... __________________ 2014 SS Stainless Works Headers w/ high flow cats, Stainless Works Retro Chambered Exhaust, Jannety Tune, Hurst short throw, APEX catch can, Tampa Tunning Throttle Body, APEX/Gen5 LED fogs, CAI Intake system, Diode Dynamics LED's, ACS T4 Splitter

03-26-2014, 07:40 AM	#11
RavenZL1 Drives: ZL1 Join Date: Jun 2013 Location: Stafford, VA Posts: 156	If you are looking for N. VA area, David at ProShieldinc in Sterling is excellent. He has done several of my cars including the ZL1 __________________

03-26-2014, 11:25 AM	#12
mikescamaro12 Drives: 2014 chevy camaro 2lt RS Join Date: Nov 2013 Location: virginia beach, va Posts: 241 View My Garage	clear bra install here is some pics from the install both hood and side panel . Attached Images __________________ GMG1(SW) usn ret Battleship sailor

03-19-2014, 07:38 PM	#2
22385 Drives: Camaro 2013 2SS Join Date: Mar 2013 Location: Virginia Posts: 47 View My Garage	I forgot to write his name down, but he comes highly recommended. He is located in Chesapeake, Va. His # is 757-547-0864. Since I got the third ding on my '13, I have been contemplating have mine done. Good luck and please let me know how it turns out.

03-25-2014, 08:37 AM	#6
jrhagen Banned Drives: Camaro Join Date: Mar 2013 Location: USA Posts: 2,701	Just make sure the install is CAD cut and not bulk cut. With bulk cut, all cutting and trimming is done with a blade on your car. You will end up with slices and you won't know it until the material is removed.