Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro ZL1 Forum - ZL1 Specific Topics > Engine | Exhaust | Bolt-On | Drivetrain Modifications


Reply
 
Thread Tools
Old 03-06-2018, 01:51 PM   #1
SamHouseIII
I Carry!
 
SamHouseIII's Avatar
 
Drives: 2013 CRT ZL1
Join Date: Jul 2011
Location: Fletcher, Ok
Posts: 2,714
Info on stroking the LSA

I want to stroke my LSA and not to sure what all needs to go into this. I figure since I am going to tear down and rebuild my LSA, why not stroke it. I've searched the web and have watched a couple of videos but not clear still on what is all needed.

Will I need to bore? I'd like to keep stock bore.
Will I need to worry about deck height?
Will I need a certain connecting rod length?
What's the safest boost with a stroked LSA?
Will I need different pistons?
Push rods?
Cam?
Trunion upgrades?
Max lift for Cam?
Dual Springs?
Fuel delivery?

Ted Jannetty you've done these before and I trust you, you sell the kits for a stroker?

Anyone have a good website to research/read?

Videos I've found.

https://www.powernationtv.com/episod...stroker-part-1

http://www.powernationtv.com/episode...stroker-part-2
__________________
I am a Modaholic!! Please Help!! Do Not feed my addicition....See build...
http://www.camaro5.com/forums/showthread.php?t=261540

From Oklahoma, Join us on Facebook
https://www.facebook.com/groups/okcamaros/

SamHouseIII is offline   Reply With Quote
Old 03-06-2018, 02:32 PM   #2
hammdo
'It's an experiment'
 
hammdo's Avatar
 
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE
Join Date: May 2014
Location: Dallas TX
Posts: 7,106
You can see what I did with mine starting here:

http://www.camaro5.com/forums/showth...385577&page=85

Ending here — where I road raced it after 500 mile break-in...

http://www.camaro5.com/forums/showth...85577&page=115

Mine has an LS3 forged crank since I don’t have a 6L90 in mine

Will give you an idea...

-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari
See My Build: http://www.camaro5.com/forums/showthread.php?t=385577
hammdo is offline   Reply With Quote
Old 03-08-2018, 09:35 AM   #3
SamHouseIII
I Carry!
 
SamHouseIII's Avatar
 
Drives: 2013 CRT ZL1
Join Date: Jul 2011
Location: Fletcher, Ok
Posts: 2,714
http://www.superchevy.com/how-to/eng...-supersize-me/
__________________
I am a Modaholic!! Please Help!! Do Not feed my addicition....See build...
http://www.camaro5.com/forums/showthread.php?t=261540

From Oklahoma, Join us on Facebook
https://www.facebook.com/groups/okcamaros/

SamHouseIII is offline   Reply With Quote
Old 05-16-2018, 08:25 PM   #4
Blownfogger540

 
Blownfogger540's Avatar
 
Drives: 2013 ZL1 416
Join Date: Feb 2013
Location: Langley B.C
Posts: 1,709
longer stroke means you have to remove and plug up the oil squirters or spend
$600 on katech ones
4.00" stroke is max on LS3 or LSA cylinder liners are short
Blownfogger540 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:16 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.