05-17-2015, 05:17 PM | #1 |
Drives: CGM 2SS/RS Join Date: Jul 2012
Location: Bay Area
Posts: 224
|
Hood inserts over TVS
Those out there with a TVS2300... Any hood inserts like DJ grilles or HEX being used? Or even the zl1 style inserts or dura flex? Enough clearance for the Maggie?
|
05-17-2015, 05:23 PM | #2 |
Flying da helicopter
|
SLP makes a hood vent similar to the 2014 heat extractor that is suppose to fit with the supercharger. I thought about getting it on mine, but I haven't seen anyone with it installed yet.
http://www.slponline.com/product/620...extractor.html |
05-17-2015, 06:04 PM | #3 |
Drives: CGM 2SS/RS Join Date: Jul 2012
Location: Bay Area
Posts: 224
|
That does look pretty awesome for that price. I wonder how it would install in a hood that needs to be cut...
|
05-17-2015, 06:13 PM | #4 |
Flying da helicopter
|
If you follow the steps on this link, it will be the same setup. I've been thinking about doing this for months now.
http://www.camaro5.com/forums/showthread.php?t=346744 |
05-18-2015, 09:10 PM | #5 |
One Slow Automatic
Drives: 2017 GS 2010 CAMARO SS Join Date: Mar 2010
Location: NC NJ NY DMV THE BAYAREA
Posts: 877
|
Yes it will work with minor trim...i did this and it works...If u need assistance Im in the Bay area
__________________
650HP 2010 CAMARO SS 710HP 2017 GRAND SPORT
|
05-19-2015, 03:02 PM | #6 |
Drives: CGM 2SS/RS Join Date: Jul 2012
Location: Bay Area
Posts: 224
|
Which grill? Any photos when you did yours? 1985airborne
Where are you located? |
05-20-2015, 12:17 PM | #7 |
One Slow Automatic
Drives: 2017 GS 2010 CAMARO SS Join Date: Mar 2010
Location: NC NJ NY DMV THE BAYAREA
Posts: 877
|
The GM extractor...sorry for the delay
__________________
650HP 2010 CAMARO SS 710HP 2017 GRAND SPORT
|
05-21-2015, 03:50 AM | #8 |
Drives: 2011 camaro LS3 supercharger Join Date: Aug 2012
Location: JEDDAH
Posts: 96
|
I just ordered one after reading this. i was really need it on my Camaro
__________________
SLP TVS 2300,LS9 cam,ZL1 fuel bump, ADM FPCM,850ID,LT headers,CAI intake K&N, X pipe with stock exhaust Eibach 1inch suspension,Mantic Clutch 700HP, 91fule .8psi METH AEM, no timing up 557 RWHP
ZL1 black wheels,ZL1 front bumper, ground effects, |
05-27-2015, 06:24 PM | #9 |
Drives: 2012 Camaro 2SS / RS Join Date: Feb 2013
Location: Las Vegas
Posts: 99
|
I have hex vents over my TVS 2300 with no issues. I did not install the trays because i wanted to vent as much Vegas heat from the supercharger. I dont know if using the trays will cause clearance issues.
|
|
|
|
|