04-17-2015, 09:18 AM | #1 |
Drives: 2010 Camaro SS Join Date: Feb 2010
Location: Oklahoma
Posts: 247
|
Stand alone fuel system
I have a boosted 2010 SS M6 that is getting ready for a small (100-200) shot of nitrous.
I have on good authority that a dedicated fuel system is the way to go on this. Even a small drop in fuel pressure when the nitrous comes on is something I want to avoid. I am looking for some advice on what other members have used-with maybe some pictures. I would like something under the hood if possible to simplify the plumbing.
__________________
LSX 429, Vortech V7 YSI, Squash Fuel system, Jannetty Tuned.
|
04-19-2015, 10:12 AM | #2 |
StandAlone
Here is my setup using Nitrous Express standalone fuel cell.
__________________
Go Hard or Go Home
|
|
04-19-2015, 03:17 PM | #3 |
Drives: 2010 Camaro SS Join Date: Feb 2010
Location: Oklahoma
Posts: 247
|
Thanks, I'm looking for something like that. Unfortunately that is right where my supercharger sits.
On your set up-how close does your throttle body come to the idler pulley? Just by doing some measuring on my car-it looks like zero clearance. I am trying to see where the ZL1 systems tank sits in the kit that nitrous outlet sells-haven't been able to find any pics.
__________________
LSX 429, Vortech V7 YSI, Squash Fuel system, Jannetty Tuned.
|
04-19-2015, 03:46 PM | #4 |
Throttle and idler pulley is a pretty tight fit but it works. I've seen guys use Corvette idler pulley. In the new Camaro Now magazine it's an article in there with Fast intake swap that uses that corvette pulley.The Nitrous outlet tank is on the other side towards the front near radiator. I'm my opinion it looks better but at the time of my build I couldn't wait on it I had to have fuel cell the next day for my nitrous setup.
Sent from my iPhone using Tapatalk
__________________
Go Hard or Go Home
|
|
04-19-2015, 05:00 PM | #5 |
Drives: 2010 Camaro SS Join Date: Feb 2010
Location: Oklahoma
Posts: 247
|
Thanks again for the picture.
That idler you are talking about-is it the stock C5 idler. That Magazine does not seem to be available here locally. I don't have much room on the right either. My Vortech system located the coolant recovery tank over there by the ECM.
__________________
LSX 429, Vortech V7 YSI, Squash Fuel system, Jannetty Tuned.
|
04-22-2015, 08:25 AM | #6 |
Yes its stock a idler
Sent from my iPhone using Tapatalk
__________________
Go Hard or Go Home
|
|
04-22-2015, 08:45 AM | #7 |
Geek
|
I had to extend the wire harness and flip the throttle body over in order to fit the plate on mine.
__________________
01000111011011110110111101100100001000000110110001 11010101100011011010110010000001110111011010010111 01000110100000100000011101000110100001101001011100 110010000001101111011011100110010100100001
x = ac97968bd3df8f968c8cd3df998a9c94d3df9c8a918bd3df9c 909c94df8c8a9c949a8dd3df92908b979a8ddf998a9c949a8d d3df8b968b8cd1 x = ~x |
02-01-2018, 03:57 PM | #8 |
Drives: 2010 camaro 2ss/rs Join Date: Jan 2016
Location: toledo
Posts: 41
|
GTKiller how did you mount that stand alone?
|
|
|
|
|