Michigan FBody Dyno Day - June 15th at Jake's Automotive in Sterling Heights, MI

[meissen]

$50 for two dyno pulls and the printed graph afterwards. This is a pretty casual dyno day -- get there around 9am and the dyno day goes until there's no more people left to dyno. It's usually a bunch of fun and we have cars of all shapes and sizes that go through. This is a RWD/FWD dyno -- not AWD.

June 15th, this Saturday, from 9am to whenever. Jake's Automotive is located on Triangle Drive, off Van Dyke south of Hall Road.

More info can be found on MiFBody's thread (you don't have to register to read the info):
http://www.mifbody.com/vbulletin/sho...3-Registration

[HDRDTD]

Love to be there, but that's the same day as the Gratiot cruise isn't it?

[meissen]

Yeah you're right - the Eastpointe Gratiot Cruise is this weekend as well I believe. I don't remember the times for the cruise, but you might be able to do both - spend the morning at the dyno day and the afternoon at the Cruise.

[1COR.1:18]

Official Cruise Hours are 8am-8pm

Will be down by the Chevrolet Dealer

[Cookie Monster]

I usually attend the cruise, but within the years to come I might actually participate

[meissen]

Originally Posted by 1COR.1:18

Official Cruise Hours are 8am-8pm

Will be down by the Chevrolet Dealer

Merollis? That's where my wife works





The cruise is fun, but it's pretty boring only being a 2 mile oval. Dyno day will definitely be more fun!

[meissen]

Tomorrow!

[meissen]

Had an absolute blast -- had one or two members from Camaro5 come out too. Overall we had 21 cars on the roller. Top HP cars were a bone stock ZL1 and a bone stock CTS-V. Surprisingly, we all saw first hand how badly a ZL1 can get heat soaked. Even with a large industrial fan blowing on the front of the car, the second pull was 20hp less than the first pull.

Here's some pictures and a couple vids that I took:
http://mifbody.com/gallery/index.php...FBody-Dyno-Day